Today's Message Index:
----------------------
1. 06:31 AM - Re: Blue Mountain EFIS ()
2. 06:55 AM - Re: Blue Mountain EFIS (Mike)
3. 07:35 AM - Removing D-Sub sockets (Ralph E. Capen)
4. 08:40 AM - Re: AeroElectric-List: Audio panel #inputs vs #sources (Ralph E. Capen)
5. 08:46 AM - Re: Blue Mountain EFIS (Terry Watson)
6. 09:05 AM - Re: Blue Mountain EFIS ()
7. 09:32 AM - Re: Blue Mountain EFIS (Terry Watson)
8. 02:52 PM - Re: Blue Mountain EFIS (Richard Tasker)
9. 02:59 PM - Re: Removing D-Sub sockets (Doug20310)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Blue Mountain EFIS |
I've never owned one, but I've never read anything but negative
commentary. My suspicion is elevated by the fact that they haven't had a
product release in years and their website never seems to receive
updates. That may indicate a lack of funding for development, laziness
or cutbacks depending on the situation. Personally I stick with the
mainstream candidates which have a chance of being around tomorrow.
-----Original Message-----
From: owner-avionics-list-server@matronics.com
[mailto:owner-avionics-list-server@matronics.com] On Behalf Of Sully
Sent: Sunday, January 13, 2008 11:17 PM
Subject: Avionics-List: Blue Mountain EFIS
I wanted to find out if anyone has recent experience with performance
and support from Blue Mountain. I have an opportunity to buy an EFIS/One
from someone who hasn't been satisfied, but most of the negative posts
I've seen seem to be several months old. Any current info will
appreciated. Sully
--------
Sully
RV-7 In-work
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=157916#157916
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Blue Mountain EFIS |
Sully,
I work with Grand Rapids, Advanced Flight Systems, Chelton, Dynon, EI,
Honeywell, Performance Aircraft Engines, MT propeller, ECI, Light Speed,
JPI, Trutrak, NAT, and Blue Mountain. I deal with all these companies
directly not through third parties. Blue Mountain out of the list above
is a 0 out of 10. Out of the list they are the worst by far, both in
product and customer support.
Mike Larkin
Email me for details: mikelarkinairshows@cox.net
-----Original Message-----
From: owner-avionics-list-server@matronics.com
[mailto:owner-avionics-list-server@matronics.com] On Behalf Of Sully
Sent: Sunday, January 13, 2008 9:17 PM
Subject: Avionics-List: Blue Mountain EFIS
I wanted to find out if anyone has recent experience with performance
and support from Blue Mountain. I have an opportunity to buy an EFIS/One
from someone who hasn't been satisfied, but most of the negative posts
I've seen seem to be several months old. Any current info will
appreciated.
Sully
--------
Sully
RV-7 In-work
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=157916#157916
10/2/2007 11:10 AM
10/2/2007 11:10 AM
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Removing D-Sub sockets |
Fellow tronners....
Is there a trick to removing D-Sub sockets from the connector?
I have the tool from radio shack (I have actually destroyed three of them) for
the standard sockets. My trouble is that I can't get the tool to go past the
base of the pin to where it would release the 'holding' fingers in the connector
assembly.
It has to be either the tool or my gorilla fisted technique..... every once in
a while, I can wiggle while holding my tongue right, and it'll go in to allow
me to extract the socket.
I have two sockets remaining - I need to get a new tool - is there a better one?
Thanks,
Ralph
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: AeroElectric-List: Audio panel #inputs vs #sources |
Will 1/4 watt be sufficient?
-----Original Message-----
>From: "Robert L. Nuckolls, III" <nuckolls.bob@cox.net>
>Sent: Jan 11, 2008 10:47 AM
>To: aeroelectric-list@matronics.com
>Subject: Re: AeroElectric-List: Audio panel #inputs vs #sources
>
>--> AeroElectric-List message posted by: "Robert L. Nuckolls, III" <nuckolls.bob@cox.net>
>
>At 08:13 AM 1/11/2008 -0500, you wrote:
>
>>--> AeroElectric-List message posted by: "Ralph E. Capen"
>><recapen@earthlink.net>
>>
>>Bob,
>>
>>I have heard 100ohm, 470ohm, and 510ohm. I'm guessing that either will
>>function properly and that the 470 and 510's will decrease the volume more
>>in addition to preventing the backfeed.
>>
>>Ralph
>
> Astute supposition sir.
>
> Bob . . . ----------------------------------------)
>
> ( . . . a long habit of not thinking )
> ( a thing wrong, gives it a superficial )
> ( appearance of being right . . . )
> ( )
> ( -Thomas Paine 1776- )
> ----------------------------------------
>
>
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Blue Mountain EFIS |
It sounds like you need to hit the refresh button on your browser. Blue
Mountain has developed several new products and new versions of the old
products in recent years.
Terry
RV-8A wiring, BMA EFIS/one
-----Original Message-----
From: owner-avionics-list-server@matronics.com
[mailto:owner-avionics-list-server@matronics.com] On Behalf Of longg@pjm.com
Sent: Monday, January 14, 2008 6:30 AM
Subject: RE: Avionics-List: Blue Mountain EFIS
< My suspicion is elevated by the fact that they haven't had a
product release in years and their website never seems to receive
updates. That may indicate a lack of funding for development, laziness
or cutbacks depending on the situation.>
Message 6
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Blue Mountain EFIS |
No thanks, I have no interest in using their proprietary AP with that
setup regardless of what screen size they slap on it. As I said, I've
yet to hear anything good coming out of that camp.
-----Original Message-----
From: owner-avionics-list-server@matronics.com
[mailto:owner-avionics-list-server@matronics.com] On Behalf Of Terry
Watson
Sent: Monday, January 14, 2008 11:45 AM
Subject: RE: Avionics-List: Blue Mountain EFIS
It sounds like you need to hit the refresh button on your browser. Blue
Mountain has developed several new products and new versions of the old
products in recent years.
Terry
RV-8A wiring, BMA EFIS/one
-----Original Message-----
From: owner-avionics-list-server@matronics.com
[mailto:owner-avionics-list-server@matronics.com] On Behalf Of
longg@pjm.com
Sent: Monday, January 14, 2008 6:30 AM
Subject: RE: Avionics-List: Blue Mountain EFIS
< My suspicion is elevated by the fact that they haven't had a product
release in years and their website never seems to receive updates. That
may indicate a lack of funding for development, laziness or cutbacks
depending on the situation.>
Message 7
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Blue Mountain EFIS |
Sorry. I thought you wanted to know what you were talking about.
Terry
-----Original Message-----
From: owner-avionics-list-server@matronics.com
[mailto:owner-avionics-list-server@matronics.com] On Behalf Of longg@pjm.com
Sent: Monday, January 14, 2008 9:05 AM
Subject: RE: Avionics-List: Blue Mountain EFIS
No thanks, I have no interest in using their proprietary AP with that
setup regardless of what screen size they slap on it. As I said, I've
yet to hear anything good coming out of that camp.
-----Original Message-----
From: owner-avionics-list-server@matronics.com
[mailto:owner-avionics-list-server@matronics.com] On Behalf Of Terry
Watson
Sent: Monday, January 14, 2008 11:45 AM
Subject: RE: Avionics-List: Blue Mountain EFIS
It sounds like you need to hit the refresh button on your browser. Blue
Mountain has developed several new products and new versions of the old
products in recent years.
Terry
RV-8A wiring, BMA EFIS/one
-----Original Message-----
From: owner-avionics-list-server@matronics.com
[mailto:owner-avionics-list-server@matronics.com] On Behalf Of
longg@pjm.com
Sent: Monday, January 14, 2008 6:30 AM
Subject: RE: Avionics-List: Blue Mountain EFIS
< My suspicion is elevated by the fact that they haven't had a product
release in years and their website never seems to receive updates. That
may indicate a lack of funding for development, laziness or cutbacks
depending on the situation.>
Message 8
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Blue Mountain EFIS |
C'mon Terry, stop muddying the water with facts...
Dick
Terry Watson wrote:
>
> Sorry. I thought you wanted to know what you were talking about.
>
> Terry
>
>
> -----Original Message-----
> From: owner-avionics-list-server@matronics.com
> [mailto:owner-avionics-list-server@matronics.com] On Behalf Of longg@pjm.com
> Sent: Monday, January 14, 2008 9:05 AM
> To: avionics-list@matronics.com
> Subject: RE: Avionics-List: Blue Mountain EFIS
>
>
> No thanks, I have no interest in using their proprietary AP with that
> setup regardless of what screen size they slap on it. As I said, I've
> yet to hear anything good coming out of that camp.
>
> -----Original Message-----
> From: owner-avionics-list-server@matronics.com
> [mailto:owner-avionics-list-server@matronics.com] On Behalf Of Terry
> Watson
> Sent: Monday, January 14, 2008 11:45 AM
> To: avionics-list@matronics.com
> Subject: RE: Avionics-List: Blue Mountain EFIS
>
>
>
> It sounds like you need to hit the refresh button on your browser. Blue
> Mountain has developed several new products and new versions of the old
> products in recent years.
>
> Terry
> RV-8A wiring, BMA EFIS/one
>
>
> -----Original Message-----
> From: owner-avionics-list-server@matronics.com
> [mailto:owner-avionics-list-server@matronics.com] On Behalf Of
> longg@pjm.com
> Sent: Monday, January 14, 2008 6:30 AM
> To: avionics-list@matronics.com
> Subject: RE: Avionics-List: Blue Mountain EFIS
>
>
> < My suspicion is elevated by the fact that they haven't had a product
> release in years and their website never seems to receive updates. That
> may indicate a lack of funding for development, laziness or cutbacks
> depending on the situation.>
>
>
>
Message 9
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Removing D-Sub sockets |
Not sure what the RS tool looks like - I have used those from B&C in
Wichita. They are pretty fragile, so ordered two.
I have found that removing the tool and moving it 180 degrees to the other
side of the wire sometimes helps, as does some wiggling as you found out.
Sometimes, one is simply able to rotate the tool 180 degrees alongside the
wire while it remains in the socket.
Doug
----- Original Message -----
From: "Ralph E. Capen" <recapen@earthlink.net>
<aeroelectric-list@matronics.com>
Sent: Monday, 14 January, 2008 7:34
Subject: Avionics-List: Removing D-Sub sockets
> <recapen@earthlink.net>
>
> Fellow tronners....
>
> Is there a trick to removing D-Sub sockets from the connector?
>
> I have the tool from radio shack (I have actually destroyed three of them)
> for the standard sockets. My trouble is that I can't get the tool to go
> past the base of the pin to where it would release the 'holding' fingers
> in the connector assembly.
>
> It has to be either the tool or my gorilla fisted technique..... every
> once in a while, I can wiggle while holding my tongue right, and it'll go
> in to allow me to extract the socket.
>
> I have two sockets remaining - I need to get a new tool - is there a
> better one?
>
> Thanks,
> Ralph
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|