---------------------------------------------------------- Avionics-List Digest Archive --- Total Messages Posted Tue 05/13/08: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:22 AM - Re: Connector for P-1000 (Noel Loveys) 2. 10:55 AM - Re: Avionics-List Digest: 3 Msgs - 05/12/08 (D Wysong) 3. 11:59 AM - Re: Re: Avionics-List Digest: 3 Msgs - 05/12/08 (Doug McNutt) 4. 12:35 PM - Re: Re: Avionics-List Digest: 3 Msgs - 05/12/08 (Richard Tasker) 5. 05:28 PM - autopilot (Dennis Holbrook) ________________________________ Message 1 _____________________________________ Time: 07:22:41 AM PST US From: "Noel Loveys" Subject: RE: Avionics-List: Connector for P-1000 Try Aviall or ant avionics shop. Noel From: owner-avionics-list-server@matronics.com [mailto:owner-avionics-list-server@matronics.com] On Behalf Of Robin Hou Sent: Tuesday, May 13, 2008 12:19 AM Subject: Avionics-List: Connector for P-1000 I have a Horizon Instruments, Inc. P-1000 Digital Engine Tachometer. It has a 6-pin connector labeled "Amphenol 14S-6PF". Does anyone have a source to buy a matching connector to build its hardness? Also, anyone has pin-out for this unit? Thanks in advance. Robin Hou ________________________________ Message 2 _____________________________________ Time: 10:55:33 AM PST US From: "D Wysong" Subject: Avionics-List: Re: Avionics-List Digest: 3 Msgs - 05/12/08 > I have a Horizon Instruments, Inc. P-1000 Digital Engine Tachometer. It has a > 6-pin connector labeled "Amphenol 14S-6PF". Does anyone have a source to buy > a matching connector to build its hardness? Hello Robin, Try www.mouser.com and search for "amphenol 14S-6". They will point you to their catalog and Amphenol datasheets that will assist you in finding a mating connector. D ________________________________ Message 3 _____________________________________ Time: 11:59:09 AM PST US From: Doug McNutt Subject: Re: Avionics-List: Re: Avionics-List Digest: 3 Msgs - 05/12/08 At 11:51 -0600 5/13/08, D Wysong wrote: > >> I have a Horizon Instruments, Inc. P-1000 Digital Engine Tachometer. It has a >> 6-pin connector labeled "Amphenol 14S-6PF". Does anyone have a source to buy >> a matching connector to build its hardness? > >Hello Robin, #! > >Try www.mouser.com and search for "amphenol 14S-6". They will point >you to their catalog and Amphenol datasheets that will assist you in >finding a mating connector. I have in my hands an MS3106A - 14S -6S, A relic of World War II, in my hands. Pins are letters A through F with pin A aligned with the alignment slot. Where are you. Anywhere near Colorado Springs? Digikey lists a mate to your connector but they have a $25 minimum charge. I donno about Mouser. You'll need a cable clamp to go with it. Hit me off line at dmcnutt@ (the from line) Colorado Springs, CO, US of A. -- --> From the U S of A, the only socialist country that refuses to admit it. <-- ________________________________ Message 4 _____________________________________ Time: 12:35:35 PM PST US From: Richard Tasker Subject: Re: Avionics-List: Re: Avionics-List Digest: 3 Msgs - 05/12/08 Digikey doesn't actually have a $25 minimum. What they have is a $5 extra handling charge if your order is less than $25. Mouser has no minimum charge or handling charge - but their prices are typically a little higher. Dick Tasker Doug McNutt wrote: > > At 11:51 -0600 5/13/08, D Wysong wrote: > >> >> >>> I have a Horizon Instruments, Inc. P-1000 Digital Engine Tachometer. It has a >>> 6-pin connector labeled "Amphenol 14S-6PF". Does anyone have a source to buy >>> a matching connector to build its hardness? >>> >> Hello Robin, #! >> >> Try www.mouser.com and search for "amphenol 14S-6". They will point >> you to their catalog and Amphenol datasheets that will assist you in >> finding a mating connector. >> > > I have in my hands an MS3106A - 14S -6S, A relic of World War II, in my hands. Pins are letters A through F with pin A aligned with the alignment slot. > > Where are you. Anywhere near Colorado Springs? > > Digikey lists a mate to your connector but they have a $25 minimum charge. I donno about Mouser. You'll need a cable clamp to go with it. > > Hit me off line at dmcnutt@ (the from line) Colorado Springs, CO, US of A. > > ________________________________ Message 5 _____________________________________ Time: 05:28:23 PM PST US From: "Dennis Holbrook" Subject: Avionics-List: autopilot To the many folks who responded to my autopilot questions... Thanks! All good info on a variety of equipment. Apparently, there is no bad choice... other than not installing an autopilot at all. Dennis ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message avionics-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Avionics-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/avionics-list Browse Digests http://www.matronics.com/digest/avionics-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.