Today's Message Index:
----------------------
1. 04:17 AM - Re: Transponder and Radio position (Bill Denton)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Transponder and Radio position |
One guide for placing avionics is: "Which one do you touch most often?"
Put those that you frequently touch in the most convenient places, keeping
in mind that you will frequently need to look at a given unit while touching
it.
Thanks!
Bill Denton
bdenton@bdenton.com
From: owner-avionics-list-server@matronics.com
[mailto:owner-avionics-list-server@matronics.com] On Behalf Of Carlos Trigo
Sent: Sunday, September 28, 2008 9:20 PM
Subject: Avionics-List: Transponder and Radio position
Hi there Folks
I am about to begin the installation of the Transponder (GTX-330) and the
Comm Radio (SL-30) in my RV-9A's panel, and I wonder if there is any rule of
thumb about their position in the central rack.
In panels that I have seen, the Xpdr is usually at the bottom position, with
the Radio immediately above.
Which are the pros and cons of putting those 2 avionics at the bottom of the
rack, and the Xpdr below or above the Radio?
Carlos
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|