Avionics-List Digest Archive

Mon 02/02/09


Total Messages Posted: 4



Today's Message Index:
----------------------
 
     1. 05:08 PM - KX170/A/B schematics? (Jay Maynard)
     2. 05:54 PM - Re: KX170/A/B schematics? (Ron Quillin)
     3. 06:39 PM - Re: KX170/A/B schematics? (Noel Loveys)
     4. 07:59 PM - Re: KX170/A/B schematics? (Jay Maynard)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:08:53 PM PST US
    From: Jay Maynard <jmaynard@conmicro.com>
    Subject: KX170/A/B schematics?
    I've got one of each of the King KX170, KX170A, and KX170B, and I'm trying to get one going as a hangar monitor radio. (I'm not even gonna hook up a mic.) I'd like to have the NAV radio play out the same speaker as the COM radio, so I can turn it on (or up, in the case of the KX170) and listen to the AWOS on the on-field VOR. In my playing, I've discovered that the NAV radio audio does play out the speaker output, but at a low volume. I'd like to make it the same as the COM radio. Ideally, I'd also like to lay hands on a schematic for the radio for something less than the $100+ a service manual goes for online. Suggestions? -- Jay Maynard, K5ZC, PP-ASEL, AGI http://www.conmicro.com http://jmaynard.livejournal.com http://www.tronguy.net Fairmont, MN (KFRM) (Yes, that's me!) AMD Zodiac CH601XLi N55ZC http://www.tronguy.net/N55ZC.shtml


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:54:08 PM PST US
    From: "Ron Quillin <recent" <rjquillin@gmail.com>
    Subject: Re: KX170/A/B schematics?
    Lacking some other offer, I've found that <http://myworld.ebay.com/ebaymotors/avionicstec/>avionicstec or contact him directly at avionicstec at hotmail dot com on eBay has some nice manuals on CD at reasonable prices. At 17:00 2/2/2009, you wrote: > >I've got one of each of the King KX170, KX170A, and KX170B, and I'm trying >to get one going as a hangar monitor radio. (I'm not even gonna hook up a >mic.) I'd like to have the NAV radio play out the same speaker as the COM >radio, so I can turn it on (or up, in the case of the KX170) and listen to >the AWOS on the on-field VOR. > >In my playing, I've discovered that the NAV radio audio does play out the >speaker output, but at a low volume. I'd like to make it the same as the COM >radio. Ideally, I'd also like to lay hands on a schematic for the radio for >something less than the $100+ a service manual goes for online. > >Suggestions? >-- >Jay Maynard, K5ZC, PP-ASEL, AGI http://www.conmicro.com >http://jmaynard.livejournal.com http://www.tronguy.net >Fairmont, MN (KFRM) (Yes, that's me!) >AMD Zodiac CH601XLi N55ZC http://www.tronguy.net/N55ZC.shtml >


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:39:53 PM PST US
    From: "Noel Loveys" <noelloveys@yahoo.ca>
    Subject: KX170/A/B schematics?
    I=92m just thinking out loud here but the reason your Nav beacons and identifiers may be low is they are supposed to have separate antennae. I assume you did have both com and Nav antennae connected when you tested and not the com antenna alone. Noel From: owner-avionics-list-server@matronics.com [mailto:owner-avionics-list-server@matronics.com] On Behalf Of Ron Quillin <recent Sent: Monday, February 02, 2009 10:21 PM Subject: Re: Avionics-List: KX170/A/B schematics? Lacking some other offer, I've found that avionicstec <http://myworld.ebay.com/ebaymotors/avionicstec/> or contact him directly at avionicstec at hotmail dot com on eBay has some nice manuals on CD at reasonable prices. At 17:00 2/2/2009, you wrote: I've got one of each of the King KX170, KX170A, and KX170B, and I'm trying to get one going as a hangar monitor radio. (I'm not even gonna hook up a mic.) I'd like to have the NAV radio play out the same speaker as the COM radio, so I can turn it on (or up, in the case of the KX170) and listen to the AWOS on the on-field VOR. In my playing, I've discovered that the NAV radio audio does play out the speaker output, but at a low volume. I'd like to make it the same as the COM radio. Ideally, I'd also like to lay hands on a schematic for the radio for something less than the $100+ a service manual goes for online. Suggestions? -- Jay Maynard, K5ZC, PP-ASEL, AGI http://www.conmicro.com <http://www.conmicro.com/> http://jmaynard.livejournal.com <http://jmaynard.livejournal.com /> http://www.tronguy.net <http://www.tronguy.net/> Fairmont, MN (KFRM) (Yes, that's me!) AMD Zodiac CH601XLi N55ZC http://www.tronguy.net/N55ZC.shtml Avionics-List Email Forum - http://www.matronics.com/Navigator?Avionics-List ; - MATRONICS WEB FORUMS - http://forums.matronics.com <http://forums.matronics.com/> ; - List Contribution Web Site - ; -Matt Dralle, List Admin. http://www.matronics.com/contribution ===========


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:59:54 PM PST US
    From: Jay Maynard <jmaynard@conmicro.com>
    Subject: Re: KX170/A/B schematics?
    On Mon, Feb 02, 2009 at 11:05:43PM -0330, Noel Loveys wrote: > I?m just thinking out loud here but the reason your Nav beacons and > identifiers may be low is they are supposed to have separate antennae. I > assume you did have both com and Nav antennae connected when you tested and > not the com antenna alone. I have the radios on the bench hooked up to a service monitor (a Marconi 2966). The service monitor was connected to the NAV antenna input for that test. I got the same result on both the KX170 and KX170A, which is what made me think it was a design issue. I'm going to let the KX170A run overnight; I don't know how long the radios have sat, so I'll let the capacitors re-form. When I first hooked it up, it took about 7 microvolts to break the squelch; it improved to 3.4 microvolts after running for 20 minutes or so. That's pretty anemic, but I'm not that worried, since I mainly want to listen to the local traffic on CTAF. -- Jay Maynard, K5ZC, PP-ASEL, AGI http://www.conmicro.com http://jmaynard.livejournal.com http://www.tronguy.net Fairmont, MN (KFRM) (Yes, that's me!) AMD Zodiac CH601XLi N55ZC http://www.tronguy.net/N55ZC.shtml




    Other Matronics Email List Services

  • Post A New Message
  •   avionics-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/Avionics-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/avionics-list
  • Browse Avionics-List Digests
  •   http://www.matronics.com/digest/avionics-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --