Today's Message Index:
----------------------
1. 08:45 PM - Re: GNS 430 Calibration sequence (Dave)
2. 11:50 PM - Re: GNS 430 Calibration sequence (Tim Andres)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | GNS 430 Calibration sequence |
Tim,
Ever since I had my 430 converted to a 430w the GI-106 has been out of
calibration. On startup the half up and half left don't quite make it
to
half. When flying a course on the 106 it would not match the CDI built
in
the 430 by about half a needle tick on the 106. I have entered the
setup
mode and done the 225 (I believe) adjustment and that is spot on. I
don't
fly hard IFR so it's not a life or death issue, but it was spot on
before
the upgrade so I know it can be adjusted somehow. I have the install
manuals
but I'm missing one that deals with calibration. I have pinouts and rack
mounting antenna mounting etc but nothing on calibration. I learned
about
the set up mode from another user.
Dave
-----Original Message-----
From: owner-avionics-list-server@matronics.com
[mailto:owner-avionics-list-server@matronics.com] On Behalf Of
tim2542@sbcglobal.net
Sent: Sunday, January 02, 2011 11:59 AM
Subject: Re: Avionics-List: GNS 430 Calibration sequence
What are you connecting it to? The install
manual has a lot of info in it for connecting and
configuring various peripheral equipment.
Tim Andres
Sent from my iPhone
On Jan 2, 2011, at 8:19 AM, "Dave" <daberti@sbcglobal.net> wrote:
Does anyone on the list have documentation on the initial setup for a
430,
calibration with other instruments, that they can share?
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: GNS 430 Calibration sequence |
On 1/7/2011 8:36 PM, Dave wrote:
> Tim,
> Ever since I had my 430 converted to a 430w the GI-106 has been out of
> calibration. On startup the half up and half left don't quite make it
> to half. When flying a course on the 106 it would not match the CDI
> built in the 430 by about half a needle tick on the 106. I have
> entered the setup mode and done the 225 (I believe) adjustment and
> that is spot on. I don't fly hard IFR so it's not a life or death
> issue, but it was spot on before the upgrade so I know it can be
> adjusted somehow. I have the install manuals but I'm missing one that
> deals with calibration. I have pinouts and rack mounting antenna
> mounting etc but nothing on calibration. I learned about the set up
> mode from another user.
> Dave
>
> -----Original Message-----
> *From:* owner-avionics-list-server@matronics.com
> [mailto:owner-avionics-list-server@matronics.com] *On Behalf Of
> *tim2542@sbcglobal.net
> *Sent:* Sunday, January 02, 2011 11:59 AM
> *To:* avionics-list@matronics.com
> *Subject:* Re: Avionics-List: GNS 430 Calibration sequence
>
> What are you connecting it to? The install
> manual has a lot of info in it for connecting and
> configuring various peripheral equipment.
> Tim Andres
>
> Sent from my iPhone
>
> On Jan 2, 2011, at 8:19 AM, "Dave" <daberti@sbcglobal.net
> <mailto:daberti@sbcglobal.net>> wrote:
>
>> Does anyone on the list have documentation on the initial setup
>> for a 430, calibration with other instruments, that they can share?
>> *
>>
>>
>> *
> *
>
> 3D============================================
> href='3D"http://www.matronics.com/Navigator?Avionics-List"'>http://www.matronics.com/Navigator?Avionics-List
> 3D============================================
> href='3D"http://forums.matronics.com"'>http://forums.matronics.com
> 3D============================================
> href='3D"http://www.matronics.com/contribution"'>http://www.matronics.com/contribution
> 3D============================================
>
> *
>
> *
>
>
> *
Sorry then Icant help except to email you a copy of my install manual.
MAybe call a Garmin Tech or Stein.
Good luck, Tim
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|