Today's Message Index:
----------------------
1. 10:50 PM - Re: Narco AT-165 Transponder wiring questionNarco AT-165 Transponder wiring question (Tom Herrmann)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Narco AT-165 Transponder wiring questionNarco AT-165 |
Transponder wiring question
After further investigation, I found out that Narco made several
models of the AT-165 Transponder as either a new installation (AT-165)
or as a King KT-76 slide-in replacement (AT-165K) or as a Cessna
RT-359/459 slide in replacement (AT-165C). Turns out the unit I have
is the AT-165C model. It does, for sure, have a 23 pin connector just
like the old Cessna Transponder. After finding this out, I was able
to determine that the 16ga. yellow wire from pin #12 was, indeed, for
lighting. Thanks fella's!
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|