---------------------------------------------------------- Avionics-List Digest Archive --- Total Messages Posted Mon 05/16/16: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 08:11 AM - Tru-Trak roll servo in 6/6A wing (Ralph E. Capen) 2. 10:53 AM - Re: [RV Builders] Re: Tru-Trak roll servo in 6/6A wing (Ralph E. Capen) 3. 11:41 AM - Re: Re: [RV Builders] Re: Tru-Trak roll servo in 6/6A wing (bigdog@bentwing.com) 4. 01:03 PM - Re: Re: [RV Builders] Re: Tru-Trak roll servo in 6/6A wing (Ralph E. Capen) ________________________________ Message 1 _____________________________________ Time: 08:11:01 AM PST US From: "Ralph E. Capen" Subject: Avionics-List: Tru-Trak roll servo in 6/6A wing Anyone have a TruTrak servo installed in the wing? >From memory, there previously was a wing bracket - but not currently. Looking for drawings to make the wing install bracket - the place under the seats has too much other difficult to relocate stuff... Thanks, Ralph Capen ________________________________ Message 2 _____________________________________ Time: 10:53:41 AM PST US From: "Ralph E. Capen" Subject: Avionics-List: Re: [RV Builders] Re: Tru-Trak roll servo in 6/6A wing Thanks Dan - I already had those drawings... The 6/6A wing is different internally - they built the bellcrank with a different method. I now have the three drawings for the 6/6A left wing- but are still looking for the details for the "Servo Mount Bracket" referenced in those drawings. I suppose I could cobble something together but was trying to go with what already worked. Anyone with details on the "Servo Mount Bracket" - help would be greatly appreciated. Ralph -----Original Message----- From: "dbygroups@gmail.com [RV7A]" Sent: May 16, 2016 11:34 AM Subject: [RV Builders] Re: Tru-Trak roll servo in 6/6A wing Ralph... The drawings I think you want (for a 7 in the right wing) are at http://www.trutrakap.com/wp-content/uploads/2014/03/RV-710RightWing.pdf Dan __._,_.___ Posted by: dbygroups@gmail.com Want more RV news? Sign up for the RV Builder's Hotline. It's free! http://rvbuildershotline.com Visit Your Group Privacy Unsubscribe Terms of Use __,_._,___ ________________________________ Message 3 _____________________________________ Time: 11:41:21 AM PST US From: "bigdog@bentwing.com" Subject: RE: Avionics-List: Re: [RV Builders] Re: Tru-Trak roll servo in 6/6A wing I'm guessing you've checked with Tru-Trak? They seemed to try hard to accommodate all installs back then. When I was planning to add the roll servo to my -6 I thought I'd mount it in the wing and use the -7 mount. I don't remember any one talking about problems with it but did not investigate it that deeply as I decided to go with the under seat mount. If it helps I don't see any reason why you couldn't mount it under either seat. You could also consider the Navaid approach and mount the servo in the wingtip with a long pushrod to the bellcrank. I've got the mount and pushrod from my 1st RV-6 if you want to see how that worked. Greg Young -----Original Message----- From: owner-avionics-list-server@matronics.com [mailto:owner-avionics-list-server@matronics.com] On Behalf Of Ralph E. Capen Sent: Monday, May 16, 2016 12:53 PM Subject: Avionics-List: Re: [RV Builders] Re: Tru-Trak roll servo in 6/6A wing --> Thanks Dan - I already had those drawings... The 6/6A wing is different internally - they built the bellcrank with a different method. I now have the three drawings for the 6/6A left wing- but are still looking for the details for the "Servo Mount Bracket" referenced in those drawings. I suppose I could cobble something together but was trying to go with what already worked. Anyone with details on the "Servo Mount Bracket" - help would be greatly appreciated. Ralph -----Original Message----- From: "dbygroups@gmail.com [RV7A]" Sent: May 16, 2016 11:34 AM Subject: [RV Builders] Re: Tru-Trak roll servo in 6/6A wing Ralph... The drawings I think you want (for a 7 in the right wing) are at http://www.trutrakap.com/wp-content/uploads/2014/03/RV-710RightWing.pdf Dan __._,_.___ Posted by: dbygroups@gmail.com Want more RV news? Sign up for the RV Builder's Hotline. It's free! http://rvbuildershotline.com Visit Your Group Privacy Unsubscribe Terms of Use __,_._,___ ________________________________ Message 4 _____________________________________ Time: 01:03:30 PM PST US From: "Ralph E. Capen" Subject: RE: Avionics-List: Re: [RV Builders] Re: Tru-Trak roll servo in 6/6A wing Thanks Greg - I'll zap you directly! -----Original Message----- >From: "bigdog@bentwing.com" >Sent: May 16, 2016 2:39 PM >To: "avionics-list@matronics.com" , rv-list >Subject: RE: Avionics-List: Re: [RV Builders] Re: Tru-Trak roll servo in 6/6A wing > > >I'm guessing you've checked with Tru-Trak? They seemed to try hard to accommodate all installs back then. When I was planning to add the roll servo to my -6 I thought I'd mount it in the wing and use the -7 mount. I don't remember any one talking about problems with it but did not investigate it that deeply as I decided to go with the under seat mount. If it helps I don't see any reason why you couldn't mount it under either seat. You could also consider the Navaid approach and mount the servo in the wingtip with a long pushrod to the bellcrank. I've got the mount and pushrod from my 1st RV-6 if you want to see how that worked. > >Greg Young > >-----Original Message----- >From: owner-avionics-list-server@matronics.com [mailto:owner-avionics-list-server@matronics.com] On Behalf Of Ralph E. Capen >Sent: Monday, May 16, 2016 12:53 PM >To: rv-list ; avionics-list@matronics.com >Subject: Avionics-List: Re: [RV Builders] Re: Tru-Trak roll servo in 6/6A wing > >--> > >Thanks Dan - I already had those drawings... > >The 6/6A wing is different internally - they built the bellcrank with a different method. > >I now have the three drawings for the 6/6A left wing- but are still looking for the details for the "Servo Mount Bracket" referenced in those drawings. I suppose I could cobble something together but was trying to go with what already worked. > >Anyone with details on the "Servo Mount Bracket" - help would be greatly appreciated. > >Ralph > >-----Original Message----- > >From: "dbygroups@gmail.com [RV7A]" > >Sent: May 16, 2016 11:34 AM > >To: RV7A@yahoogroups.com > >Subject: [RV Builders] Re: Tru-Trak roll servo in 6/6A wing > > > > > > >Ralph... > >The drawings I think you want (for a 7 in the right wing) are at http://www.trutrakap.com/wp-content/uploads/2014/03/RV-710RightWing.pdf > >Dan > > >__._,_.___ > > > > > > > > Posted by: dbygroups@gmail.com > > > >Want more RV news? Sign up for the RV Builder's Hotline. It's free! > >http://rvbuildershotline.com > > > > > > > > > > > > > > > Visit Your Group > > > > > > > > Privacy Unsubscribe Terms of Use > > > > > > > > > > >__,_._,___ > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message avionics-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Avionics-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/avionics-list Browse Digests http://www.matronics.com/digest/avionics-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.