----------------------------------------------------------
                           Beech-List Digest Archive
                                      ---
                     Total Messages Posted Mon 04/28/03: 1
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 08:36 PM - Need xpert advice.  (Peter Scott)
 
 
 
________________________________  Message 1  _____________________________________


Time: 08:36:16 PM PST US
From: Peter Scott <winginit@jps.net>
Subject: Beech-List: Need xpert advice.

--> Beech-List message posted by: Peter Scott <winginit@jps.net>

Howdo all you expert mechanics,
Two questions regarding my straight 35:
She didn't come from the factory with a steer able nose wheel but a kit
was soon installed.  Question: are the bushings, bolts and other parts
listed in the parts manual applicable to this beech kit?  also how tight
should this assembly be? Seems like a little play is advisable what with
all the movement that goes on during gear retraction.

Question #2
The E-80 starter slips a little on a cold start.. later (warmed engine)
starts are normal.
I understand that the friction can be tightened without resorting to an
overhaul;  .. any experience here?

Pete
4579V  ss1221