Today's Message Index:
----------------------
1. 10:09 PM - How to adjust vacuum regulator? (ROBINFLY@aol.com)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | How to adjust vacuum regulator? |
--> Beech-List message posted by: ROBINFLY@aol.com
Hi All,
My 54 E35 has a very high vacuum reading (6 at 1800, and 6.5 at full rpm).
Between my wet pump and gyros is a regulator that is shaped like a small bottle
with "Cessna" printed on it. On top of this bottle looking thing is a screw
like thing for adjustment. I could not turn the screw like thing with my
small long nose plyer. I did not have a larger plyer, and might not have enough
grip. Question:
Can I use a Vise-Grip to turn it, or would I damage it with too much force?
Which way do I turn to reduce vacuum, and how many turns to reduce about 2"?
How come it does not have a filter like other regulator for dry pumps?
Thanks.
Robin Hou
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|