----------------------------------------------------------
                           Beech-List Digest Archive
                                      ---
                     Total Messages Posted Sun 05/22/05: 1
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 05:57 AM - Re: Re: How to adjust vacuum regulator?  (flyv35b)
 
 
 
________________________________  Message 1  _____________________________________


Time: 05:57:21 AM PST US
From: "flyv35b" <flyv35b@ashcreekwireless.com>
Subject: Re: Beech-List: Re: How to adjust vacuum regulator?

--> Beech-List message posted by: "flyv35b" <flyv35b@ashcreekwireless.com>

> This regulator does not have the form filter.  It only has a screen at the
> bottom where it sucks air to regulate vacuum.  Do you think it is a good 
> idea to
> put a piece of form over the screen?

It's probably ok as is since the air sucked in does not go through the 
instruments, just the pump.  I guess if you were operating in dusty 
conditions on the ground very much it probably wouldn't do the pump much 
good but normal conditions should be fine.

Cliff