Today's Message Index:
----------------------
1. 05:12 AM - Re: Cadet-List Digest: 3 Msgs - 04/20/06 (Gene Hetsel)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Cadet-List Digest: 3 Msgs - 04/20/06 |
--> Cadet-List message posted by: Gene Hetsel <hetsel@swbell.net>
I know of two Cadets that have recently been finished. I just completed an Annual
on a new rebuild here in Dallas and I know of one in Ardmore Ok. I also have
been talking with a man in Wichita Falls, Tx that is working on a Cadet LFA.
I have a web site with a lot of information and pictures of my Cadet LFA TC's
performance data etc. I am adding addition information as I have time, including
337's and military manuals.
www.ibeatyouthere.com/culver
The Cadet was built in two versions the LFA (Franklin engine) and LCA (TCM engine).
Neal calls his homebuilt a STF (Steel Tube Fuselage) I have a little
information on the Culver V but not much.
Neal LaFrance can be reached at:
"Neal" cadetstf@cox.net
If I can answer any questions, please e-mail.
Gene
Cadet-List Digest Server <cadet-list-digest@matronics.com> wrote:
*
==================================================
Online Versions of Today's List Digest Archive
==================================================
Today's complete Cadet-List Digest can also be found in either of the
two Web Links listed below. The .html file includes the Digest formatted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation. The .txt file includes the plain ASCII version
of the Cadet-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.
HTML Version:
http://www.matronics.com/digest/cadet-list/Digest.Cadet-List.2006-04-20.html
Text Version:
http://www.matronics.com/digest/cadet-list/Digest.Cadet-List.2006-04-20.txt
================================================
EMail Version of Today's List Digest Archive
================================================
Cadet-List Digest Archive
---
Total Messages Posted Thu 04/20/06: 3
Today's Message Index:
----------------------
1. 02:10 AM - Re: Start it off (noel anderson)
2. 05:54 AM - Re: Start it off (hvandervoo@aol.com)
3. 08:47 AM - Re: Start it off (Brown Gravy)
________________________________ Message 1 _____________________________________
Time: 02:10:36 AM PST US
From: "noel anderson"
Subject: Re: Cadet-List: Start it off
--> Cadet-List message posted by: "noel anderson"
I agree. Some one must be doing work on or building a new Cadet. I would
like info on the Cadet V!!! Can some one point me in the right dierection???
Regards Noel
----- Original Message -----
From: "Brown Gravy"
Sent: Thursday, April 20, 2006 2:11 PM
Subject: Cadet-List: Start it off
> --> Cadet-List message posted by: "Brown Gravy"
>
> Well Matt
> Give everyone something to start with. I haven't found any info on the
> cadet other than the little blurb in the Aircraft Spruce catalog.
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=29555#29555
>
>
> --
>
>
________________________________ Message 2 _____________________________________
Time: 05:54:04 AM PST US
From: hvandervoo@aol.com
Subject: Re: Cadet-List: Start it off
--> Cadet-List message posted by: hvandervoo@aol.com
I have been monitoring this list for more than 8 months.
This is the first message string that has been listed.
I also subscribe to the Pietenpol list, which 180 opposite of this one.
The piet list is very much alive, the cadet list is a dud.
Neil Lafrance is AWOL, non of the marketing efforts have any support, phone# or
web links are all dead.
I have been trying to get a set of drawings for a while, My Pietenpol is finished
and I selected this to be my new project.
But no drawings no support thus I move on.
Hans van der Voort
Pietenpol builder/pilot in Texas.
-----Original Message-----
From: noel anderson
Sent: Thu, 20 Apr 2006 20:53:31 +1200
Subject: Re: Cadet-List: Start it off
--> Cadet-List message posted by: "noel anderson"
I agree. Some one must be doing work on or building a new Cadet. I would
like info on the Cadet V!!! Can some one point me in the right dierection???
Regards Noel
----- Original Message -----
From: "Brown Gravy"
Sent: Thursday, April 20, 2006 2:11 PM
Subject: Cadet-List: Start it off
> --> Cadet-List message posted by: "Brown Gravy"
>
> Well Matt
> Give everyone something to start with. I haven't found any info on the
> cadet other than the little blurb in the Aircraft Spruce catalog.
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=29555#29555
>
>
> --
>
>
________________________________ Message 3 _____________________________________
Time: 08:47:50 AM PST US
Subject: Cadet-List: Re: Start it off
From: "Brown Gravy"
--> Cadet-List message posted by: "Brown Gravy"
Mr. La France needs to make an appearance here or at least give Matt some useable
contact info. Set up a web page or something. Lets market that puppy. He's
got a good start with a Grand champion. Show it off.
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=29648#29648
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|