---------------------------------------------------------- Cadet-List Digest Archive --- Total Messages Posted Sat 04/22/06: 1 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:12 AM - Re: Cadet-List Digest: 3 Msgs - 04/20/06 (Gene Hetsel) ________________________________ Message 1 _____________________________________ Time: 05:12:11 AM PST US From: Gene Hetsel Subject: Cadet-List: Re: Cadet-List Digest: 3 Msgs - 04/20/06 --> Cadet-List message posted by: Gene Hetsel I know of two Cadets that have recently been finished. I just completed an Annual on a new rebuild here in Dallas and I know of one in Ardmore Ok. I also have been talking with a man in Wichita Falls, Tx that is working on a Cadet LFA. I have a web site with a lot of information and pictures of my Cadet LFA TC's performance data etc. I am adding addition information as I have time, including 337's and military manuals. www.ibeatyouthere.com/culver The Cadet was built in two versions the LFA (Franklin engine) and LCA (TCM engine). Neal calls his homebuilt a STF (Steel Tube Fuselage) I have a little information on the Culver V but not much. Neal LaFrance can be reached at: "Neal" cadetstf@cox.net If I can answer any questions, please e-mail. Gene Cadet-List Digest Server wrote: * ================================================== Online Versions of Today's List Digest Archive ================================================== Today's complete Cadet-List Digest can also be found in either of the two Web Links listed below. The .html file includes the Digest formatted in HTML for viewing with a web browser and features Hyperlinked Indexes and Message Navigation. The .txt file includes the plain ASCII version of the Cadet-List Digest and can be viewed with a generic text editor such as Notepad or with a web browser. HTML Version: http://www.matronics.com/digest/cadet-list/Digest.Cadet-List.2006-04-20.html Text Version: http://www.matronics.com/digest/cadet-list/Digest.Cadet-List.2006-04-20.txt ================================================ EMail Version of Today's List Digest Archive ================================================ Cadet-List Digest Archive --- Total Messages Posted Thu 04/20/06: 3 Today's Message Index: ---------------------- 1. 02:10 AM - Re: Start it off (noel anderson) 2. 05:54 AM - Re: Start it off (hvandervoo@aol.com) 3. 08:47 AM - Re: Start it off (Brown Gravy) ________________________________ Message 1 _____________________________________ Time: 02:10:36 AM PST US From: "noel anderson" Subject: Re: Cadet-List: Start it off --> Cadet-List message posted by: "noel anderson" I agree. Some one must be doing work on or building a new Cadet. I would like info on the Cadet V!!! Can some one point me in the right dierection??? Regards Noel ----- Original Message ----- From: "Brown Gravy" Sent: Thursday, April 20, 2006 2:11 PM Subject: Cadet-List: Start it off > --> Cadet-List message posted by: "Brown Gravy" > > Well Matt > Give everyone something to start with. I haven't found any info on the > cadet other than the little blurb in the Aircraft Spruce catalog. > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=29555#29555 > > > -- > > ________________________________ Message 2 _____________________________________ Time: 05:54:04 AM PST US From: hvandervoo@aol.com Subject: Re: Cadet-List: Start it off --> Cadet-List message posted by: hvandervoo@aol.com I have been monitoring this list for more than 8 months. This is the first message string that has been listed. I also subscribe to the Pietenpol list, which 180 opposite of this one. The piet list is very much alive, the cadet list is a dud. Neil Lafrance is AWOL, non of the marketing efforts have any support, phone# or web links are all dead. I have been trying to get a set of drawings for a while, My Pietenpol is finished and I selected this to be my new project. But no drawings no support thus I move on. Hans van der Voort Pietenpol builder/pilot in Texas. -----Original Message----- From: noel anderson Sent: Thu, 20 Apr 2006 20:53:31 +1200 Subject: Re: Cadet-List: Start it off --> Cadet-List message posted by: "noel anderson" I agree. Some one must be doing work on or building a new Cadet. I would like info on the Cadet V!!! Can some one point me in the right dierection??? Regards Noel ----- Original Message ----- From: "Brown Gravy" Sent: Thursday, April 20, 2006 2:11 PM Subject: Cadet-List: Start it off > --> Cadet-List message posted by: "Brown Gravy" > > Well Matt > Give everyone something to start with. I haven't found any info on the > cadet other than the little blurb in the Aircraft Spruce catalog. > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=29555#29555 > > > -- > > ________________________________ Message 3 _____________________________________ Time: 08:47:50 AM PST US Subject: Cadet-List: Re: Start it off From: "Brown Gravy" --> Cadet-List message posted by: "Brown Gravy" Mr. La France needs to make an appearance here or at least give Matt some useable contact info. Set up a web page or something. Lets market that puppy. He's got a good start with a Grand champion. Show it off. Read this topic online here: http://forums.matronics.com/viewtopic.php?p=29648#29648