Today's Message Index:
----------------------
1. 07:32 AM - Re: nylon bearings (John A. Nielsen)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: nylon bearings |
--> Cessna-List message posted by: "John A. Nielsen" <john@nielsenford.com>
Dave,
I replaced mine as well with the Teflon ones. Sure are smooth!. You
must remove the instrument panel top overlay to get at the screws
holding the bearing cup in place. Do not over tighten. Removing the
yoke is easy. Simply remove the bolt that attaches the yoke shaft to
the u-joint behind the dash. Takes only 3 minutes to do.
Plancraz2020@aol.com wrote:
> --> Cessna-List message posted by: Plancraz2020@aol.com
>
> I have a 1959 Cessna that I bought last October and I want to change the
> nylon control wheel bearings since they are worn and have alot of play. Yesterday
> I bought the yoke bearings from my local Cessna dealer and was told they
> could be installed without removing the control tube. Is this true and has anyone
> ever replaced these bearings?
>
> Thanks,
> David Jones
> Hernando, MS
>
> Do not archive
>
>
>
>
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|