----------------------------------------------------------
                           Commander-List Digest Archive
                                      ---
                     Total Messages Posted Fri 04/11/03: 1
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 11:03 AM - Re: COMMANDER ENGINE OIL  (Gary Kromer)
 
 
 
________________________________  Message 1  _____________________________________


Time: 11:03:27 AM PST US
From: "Gary Kromer" <service@commander-aero.com>
Subject: Re: Commander-List: COMMANDER ENGINE OIL

--> Commander-List message posted by: "Gary Kromer" <service@commander-aero.com>

Hi Moe,
Aeroshell 50 weight mineral on new engines till oil consumption stabilizes,
then Aeroshell 100W - 50 weight.
Gary Commander-Aero
----- Original Message -----
From: <MOEMILLS@aol.com>
Subject: Commander-List: COMMANDER ENGINE OIL


> --> Commander-List message posted by: MOEMILLS@aol.com
>
> Commander Drivers:
>
> We are just completing the instillation on two newly majored IGSO 540 B1A
> engines in my 680F(p) with new Lycoming jugs.  Any advice or suggestions
on
> which oil is best now (after break-in).  For years I have been using
> Aeroshell X100 50 wt, with fairly good success.  Keep in mind that I
operate
> out of HHR where an extremely cold day is 58F.  I do operate in the desert
> occasionally where the temp on the ground can be 105F.  Any suggestions?
>
> Thanx!
>
> Moe
>
>