Got them on my 560e, firewall installation, works good...be careful, firewall flexes if you put to much torque on wrench when taking them off. Works better if the oil is hot for the spin off.

YOURTCFG@aol.com wrote:

--> Commander-List message posted by: YOURTCFG@aol.com

In a message dated 10/6/2003 9:07:40 PM Pacific Standard Time,
radialpower@cox.net writes:

> Does anyone have oil filters installed on GSO480's? I'm looking into
> making that improvement in mine....might as well as long as the engines
> are coming of, eh?
>

Bill Williams at Air Matrix installed some new ones on his 560A, Bill are you
out there?? jb

"Arial" LANG"0">In a message dated 10/6/2003 9:07:40 PM Pacific Standa=
rd Time, radialpower@cox.net writes:

Cycon Enterprises, Inc.
General Contractors/Construction Management/Design Build Services

0-608 Quincy Street S.W.
Grandville, Michigan 49418
616 896-6488 office
616 896-6490 fax
--0-1906000493-1065517744=:37059-- ________________________________ Message 2 _____________________________________ Time: 10:50:15 AM PST US From: "Bill Williams" Subject: Commander-List: overhead panels --> Commander-List message posted by: "Bill Williams" Berry: You can send your overhead panels out to be painted with a three-step process and have the lettering silk-screened on. You can see a sample of what we did at www.eFlightline.com on the right-hand navigation panel under Aircraft Photos. If you'd like to go this way, I'll give you supplier's contacts. Bill Williams AirMatrix 17705 49th Place N.E. KAWO Hangar D Arlington, WA 98223 360-435-7343 ________________________________ Message 3 _____________________________________ Time: 11:46:11 AM PST US From: "Harry Merrirr" Subject: Re: Commander-List: overhead panels --> Commander-List message posted by: "Harry Merrirr" Thanks Harry ----- Original Message ----- From: "Bill Williams" Subject: Commander-List: overhead panels > --> Commander-List message posted by: "Bill Williams" > > Berry: > > You can send your overhead panels out to be painted with a three-step > process and have the lettering silk-screened on. You can see a sample of > what we did at www.eFlightline.com on the right-hand navigation panel under > Aircraft Photos. If you'd like to go this way, I'll give you supplier's > contacts. > > Bill Williams > AirMatrix > 17705 49th Place N.E. > KAWO Hangar D > Arlington, WA 98223 > 360-435-7343 > >