Today's Message Index:
----------------------
1. 04:07 AM - Re: "O" Rings ()
2. 04:42 AM - Re: "O" Rings (Harry Merritt)
Message 1
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> Commander-List message posted by: <service@commander-aero.com>
Good morning Moe,
NAS 1611- Standard seals for Skydrol components.
NAS 1612- Fitting O-rings for Skydrol.
Gary / Commander Aero
-----Original Message-----
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com]On Behalf Of
MOEMILLS@aol.com
Subject: Commander-List: "O" Rings
--> Commander-List message posted by: MOEMILLS@aol.com
Fellow Commander Drivers,
Does anyone have a clue as to how to convert Aero Commander Skydrol "O" ring
part numbers to recognizable part number (such as Acushnet, National, Parco,
Parker, Precision or Stillman). Also being able to convert Aero Commander
part
numbers to a size would work, since we could then look them up in one of the
above mentioned manufacturers catalog.
Skydrol "O" rings are made of Ethylene Propylane. At the present when we
remove something from the plane we have to measure the old "O" ring and then
place our order for new rings, which always keeps my plane on the ground for
a few
extra days. We need to be able to purchase them in advance.
Any help will be greatly appreciated.
Moe
N680RR
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> Commander-List message posted by: "Harry Merritt" <avtec2@bellsouth.net>
The last numbers in the part manual tell the size. Skydrol are 611 or 613
I Have a lot or Skydrol O-Rings.
Harry
----- Original Message -----
From: <MOEMILLS@aol.com>
Subject: Commander-List: "O" Rings
> --> Commander-List message posted by: MOEMILLS@aol.com
>
> Fellow Commander Drivers,
>
> Does anyone have a clue as to how to convert Aero Commander Skydrol "O"
ring
> part numbers to recognizable part number (such as Acushnet, National,
Parco,
> Parker, Precision or Stillman). Also being able to convert Aero Commander
part
> numbers to a size would work, since we could then look them up in one of
the
> above mentioned manufacturers catalog.
>
> Skydrol "O" rings are made of Ethylene Propylane. At the present when we
> remove something from the plane we have to measure the old "O" ring and
then
> place our order for new rings, which always keeps my plane on the ground
for a few
> extra days. We need to be able to purchase them in advance.
>
> Any help will be greatly appreciated.
>
> Moe
> N680RR
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|