---------------------------------------------------------- Commander-List Digest Archive --- Total Messages Posted Fri 10/17/03: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:07 AM - Re: "O" Rings () 2. 04:42 AM - Re: "O" Rings (Harry Merritt) ________________________________ Message 1 _____________________________________ Time: 04:07:40 AM PST US From: Subject: RE: Commander-List: "O" Rings --> Commander-List message posted by: Good morning Moe, NAS 1611- Standard seals for Skydrol components. NAS 1612- Fitting O-rings for Skydrol. Gary / Commander Aero -----Original Message----- From: owner-commander-list-server@matronics.com [mailto:owner-commander-list-server@matronics.com]On Behalf Of MOEMILLS@aol.com Subject: Commander-List: "O" Rings --> Commander-List message posted by: MOEMILLS@aol.com Fellow Commander Drivers, Does anyone have a clue as to how to convert Aero Commander Skydrol "O" ring part numbers to recognizable part number (such as Acushnet, National, Parco, Parker, Precision or Stillman). Also being able to convert Aero Commander part numbers to a size would work, since we could then look them up in one of the above mentioned manufacturers catalog. Skydrol "O" rings are made of Ethylene Propylane. At the present when we remove something from the plane we have to measure the old "O" ring and then place our order for new rings, which always keeps my plane on the ground for a few extra days. We need to be able to purchase them in advance. Any help will be greatly appreciated. Moe N680RR ________________________________ Message 2 _____________________________________ Time: 04:42:42 AM PST US From: "Harry Merritt" Subject: Re: Commander-List: "O" Rings --> Commander-List message posted by: "Harry Merritt" The last numbers in the part manual tell the size. Skydrol are 611 or 613 I Have a lot or Skydrol O-Rings. Harry ----- Original Message ----- From: Subject: Commander-List: "O" Rings > --> Commander-List message posted by: MOEMILLS@aol.com > > Fellow Commander Drivers, > > Does anyone have a clue as to how to convert Aero Commander Skydrol "O" ring > part numbers to recognizable part number (such as Acushnet, National, Parco, > Parker, Precision or Stillman). Also being able to convert Aero Commander part > numbers to a size would work, since we could then look them up in one of the > above mentioned manufacturers catalog. > > Skydrol "O" rings are made of Ethylene Propylane. At the present when we > remove something from the plane we have to measure the old "O" ring and then > place our order for new rings, which always keeps my plane on the ground for a few > extra days. We need to be able to purchase them in advance. > > Any help will be greatly appreciated. > > Moe > N680RR > >