---------------------------------------------------------- Commander-List Digest Archive --- Total Messages Posted Thu 01/29/04: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 10:18 AM - Re: hydraulic pump (YOURTCFG@aol.com) 2. 09:01 PM - Re: hydraulic pump (Scott Dickey) ________________________________ Message 1 _____________________________________ Time: 10:18:50 AM PST US From: YOURTCFG@aol.com Subject: Re: Commander-List: hydraulic pump --> Commander-List message posted by: YOURTCFG@aol.com In a message dated 1/28/2004 9:26:30 PM Pacific Standard Time, daniellfarmer@yahoo.com writes: There is a hydrualic pump on ebay advertised as a pesco 349 for a twin commander. Does anyone know if this the correct pump for a 500B? Nope, it is for the geared engines and I am bidding so BACK OFF!! :-) jb ________________________________ Message 2 _____________________________________ Time: 09:01:40 PM PST US From: "Scott Dickey" Subject: Re: Commander-List: hydraulic pump --> Commander-List message posted by: "Scott Dickey" I don't think this is the same pump that fits on a 500B/U/S, but I can't be sure. My pump has supply/return fittings oriented 90 degrees to the one shown on e bay (mine point outboard, not aft). My pump part number is 105HBG211B. Also, if the pump was overhauled more than 7-8 years ago, you could be in for a reseal job at a minimum if the o rings are gone. That overhaul tag looks pretty old. Good Luck. Scott