---------------------------------------------------------- Commander-List Digest Archive --- Total Messages Posted Wed 02/11/04: 12 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:06 AM - Need window moldings for a 681 (Stan) 2. 06:15 AM - Re: Need window moldings for a 681 (Chris Schuermann) 3. 07:50 AM - Re: Need window moldings for a 681 (swperk@earthlink.net) 4. 07:51 AM - Re: Need window moldings for a 681 (MOEMILLS@aol.com) 5. 08:03 AM - Re: Need window moldings for a 681 (JBOBSTER@aol.com) 6. 10:44 AM - Re: Need window moldings for a 681 (Chris Schuermann) 7. 04:38 PM - Re: Need window moldings for a 681 (Racing4funn@aol.com) 8. 04:50 PM - Re: Need window moldings for a 681 (Peter J Norris) 9. 04:57 PM - Re: Need window moldings for a 681 (Chris Schuermann) 10. 05:03 PM - Potty-Mouth Squelched... (dralle@matronics.com (Matt Dralle)) 11. 07:12 PM - Re: Need window moldings for a 681 (YOURTCFG@aol.com) 12. 07:59 PM - Re: RV-List: Potty-Mouth Squelched... (Cy Galley) ________________________________ Message 1 _____________________________________ Time: 06:06:46 AM PST US From: "Stan" Subject: Commander-List: Need window moldings for a 681 --> Commander-List message posted by: "Stan" Good morning! I am starting a refurbishment of the interior of my 681, and the two window frames (Royalite?) around the pilot's and copilot's side windows have significant warping. The interior shop told me that they should be replaced, but did not know where to find replacements. Does anyone have a suitable pair of frames, or know where to find them? Are these frames shared with other Commander models or are they unique to the 681? Assuming that I can't find suitable replacements, is there any way to straighten them? Thanks in advance, Stan N548GQ ________________________________ Message 2 _____________________________________ Time: 06:15:39 AM PST US From: Chris Schuermann Subject: Re: Commander-List: Need window moldings for a 681 --> Commander-List message posted by: Chris Schuermann Stan wrote: > is there any way to > straighten them? There was a good article in EAA Sport Aviation just a few issues back about how to restore old/warped/cracked plastic trim pieces and panel overlays. Unfortunatly, I don't have the space to keep all the magazines I get, so can't send it. The author gave a step-by-step process with material and chemical suggestions. chris ________________________________ Message 3 _____________________________________ Time: 07:50:53 AM PST US From: swperk@earthlink.net Subject: Re: Commander-List: Need window moldings for a 681 --> Commander-List message posted by: swperk@earthlink.net Hi Chris, Thanks for the info. I looked around a bit and found this: http://www.urethanesupply.com/aircraftrepair.html Is this the article you remember? Regards, Stan -----Original Message----- From: Chris Schuermann Subject: Re: Commander-List: Need window moldings for a 681 --> Commander-List message posted by: Chris Schuermann Stan wrote: > is there any way to > straighten them? There was a good article in EAA Sport Aviation just a few issues back about how to restore old/warped/cracked plastic trim pieces and panel overlays. Unfortunatly, I don't have the space to keep all the magazines I get, so can't send it. The author gave a step-by-step process with material and chemical suggestions. chris ________________________________ Message 4 _____________________________________ Time: 07:51:11 AM PST US From: MOEMILLS@aol.com Subject: Re: Commander-List: Need window moldings for a 681 --> Commander-List message posted by: MOEMILLS@aol.com The interior window frames on my 680F(p) were in horrible shape. Repair them with thin strips of aluminum and fiberglass, then cover them with an FAA approved fabric (thin leather or ultra suede looks good). Moe N680RR ________________________________ Message 5 _____________________________________ Time: 08:03:05 AM PST US From: JBOBSTER@aol.com Subject: Re: Commander-List: Need window moldings for a 681 --> Commander-List message posted by: JBOBSTER@aol.com Just had a totally thrashed interior re-done in my 1975 Cessna 182. This is an 8,000 hour airframe used in Highway Patrol.....trustme...they didn't care about the interior. Anyway....an interior shop was blae to save / repair all but 2 interior trim pieces by wrapping with an aircraft approved "stretch wool". It is available in color to match or complement most fabrics. Any questions.....call Aircraft Interior Technologies, Kelso, Washington. Hope this helps. Jim Carroll ________________________________ Message 6 _____________________________________ Time: 10:44:55 AM PST US From: Chris Schuermann Subject: Re: Commander-List: Need window moldings for a 681 --> Commander-List message posted by: Chris Schuermann swperk@earthlink.net wrote: > http://www.urethanesupply.com/aircraftrepair.html > > Is this the article you remember? That looks like the same article Stan. The finished part looks really good doesn't it? I'm sure you probably were not looking for a project like that, but welcome to "classic" airplane ownership... Chris ________________________________ Message 7 _____________________________________ Time: 04:38:19 PM PST US From: Racing4funn@aol.com Subject: Re: Commander-List: Need window moldings for a 681 --> Commander-List message posted by: Racing4funn@aol.com FUCK YOU!!! ________________________________ Message 8 _____________________________________ Time: 04:50:37 PM PST US From: "Peter J Norris" Subject: RE: Commander-List: Need window moldings for a 681 --> Commander-List message posted by: "Peter J Norris" Probably the limit of his vocabulary..... ------------------------------------ Norris Aviation Services Australia Peter J Norris nasa@quicksprint.com.au P.O. Box 226 Caloundra Qld. Australia. 4551. tel: 0412 874263 mobile: +61 412874263 ------------------------------------ -----Original Message----- From: owner-commander-list-server@matronics.com [mailto:owner-commander-list-server@matronics.com] On Behalf Of Racing4funn@aol.com Subject: Re: Commander-List: Need window moldings for a 681 --> Commander-List message posted by: Racing4funn@aol.com FUCK YOU!!! == == == == ________________________________ Message 9 _____________________________________ Time: 04:57:58 PM PST US From: Chris Schuermann Subject: Re: Commander-List: Need window moldings for a 681 --> Commander-List message posted by: Chris Schuermann Racing4funn@aol.com wrote: > FUCK YOU!!! Isn't it delightful when a well spoken individual makes an eloquent and persuasive counter-point during a discussion? Let's hope someone hijacked Mr Racing4funn's email address and that this didn't actually come from a fellow pilot! chris ________________________________ Message 10 ____________________________________ Time: 05:03:44 PM PST US From: dralle@matronics.com (Matt Dralle) "Fw: RV-List: Crossflow Engine Proposal" (Feb 11, 4:56pm) RV8-List@matronics.com, Pietenpol-List@matronics.com, Kitfox-List@matronics.com, Tailwind-List@matronics.com Subject: Commander-List: Potty-Mouth Squelched... --> Commander-List message posted by: dralle@matronics.com (Matt Dralle) Hi Ed and all, This annoying fellow has been unsubscribed. I was able to kill a whole bunch of similar posts from him, but unfortunately quite a few got through before I could stop them. Funny how he could take the time to send out all those offensive messages, but not the time to unsubscribe himself. My appologies. Matt Dralle List Admin. >-------------- >Hi Matt, > >I don't know where the below email came from other than its the Racing4Funn >address, but the message it conveys clearly falls below the standards we set >for ourselves on the lists - even when parties get emotional. So I (and I'm >sure most others agree) this is no place for folks like this on the list. I >presume that he is a subscriber, so unsubscribing him would be the >appropriate action. If it was an unauthorized use of some legitimate >subscribers e mail, then he should at least be make aware of it. > >Sincerely > >Ed >Ed Anderson >RV-6A N494BW Rotary Powered >Matthews, NC > > >----- Original Message ----- >From: >To: ; >Sent: Wednesday, February 11, 2004 7:33 PM >Subject: Re: RV-List: Crossflow Engine Proposal > > >> --> RV-List message posted by: Racing4funn@aol.com >> >> F*CK Y*U!!! >-------------- -- Matt G. Dralle | Matronics | P.O. Box 347 | Livermore | CA | 94551 925-606-1001 Voice | 925-606-6281 FAX | dralle@matronics.com Email http://www.matronics.com/ W.W.W. | Featuring Products For Aircraft ________________________________ Message 11 ____________________________________ Time: 07:12:18 PM PST US From: YOURTCFG@aol.com Subject: Re: Commander-List: Need window moldings for a 681 --> Commander-List message posted by: YOURTCFG@aol.com In a message dated 2/11/2004 4:58:29 PM Pacific Standard Time, cschuerm@cox.net writes: didn't actually come from a fellow pilot! Amen jb ________________________________ Message 12 ____________________________________ Time: 07:59:29 PM PST US From: "Cy Galley" , , , , Subject: Commander-List: Re: RV-List: Potty-Mouth Squelched... --> Commander-List message posted by: "Cy Galley" I just forwarded the messages to abuse@aol.com ----- Original Message ----- From: "Matt Dralle" ; ; ; Subject: RV-List: Potty-Mouth Squelched... > --> RV-List message posted by: dralle@matronics.com (Matt Dralle) > > > Hi Ed and all, > > This annoying fellow has been unsubscribed. I was able to kill a whole > bunch of similar posts from him, but unfortunately quite a few got > through before I could stop them. Funny how he could take the time > to send out all those offensive messages, but not the time to unsubscribe > himself. > > My appologies. > > Matt Dralle > List Admin. > > > >-------------- > >Hi Matt, > > > >I don't know where the below email came from other than its the Racing4Funn > >address, but the message it conveys clearly falls below the standards we set > >for ourselves on the lists - even when parties get emotional. So I (and I'm > >sure most others agree) this is no place for folks like this on the list. I > >presume that he is a subscriber, so unsubscribing him would be the > >appropriate action. If it was an unauthorized use of some legitimate > >subscribers e mail, then he should at least be make aware of it. > > > >Sincerely > > > >Ed > >Ed Anderson > >RV-6A N494BW Rotary Powered > >Matthews, NC > > > > > >----- Original Message ----- > >From: > >To: ; > >Sent: Wednesday, February 11, 2004 7:33 PM > >Subject: Re: RV-List: Crossflow Engine Proposal > > > > > >> --> RV-List message posted by: Racing4funn@aol.com > >> > >> F*CK Y*U!!! > >-------------- > > > -- > > > Matt G. Dralle | Matronics | P.O. Box 347 | Livermore | CA | 94551 > 925-606-1001 Voice | 925-606-6281 FAX | dralle@matronics.com Email > http://www.matronics.com/ W.W.W. | Featuring Products For Aircraft > >