---------------------------------------------------------- Commander-List Digest Archive --- Total Messages Posted Sun 02/22/04: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 03:09 AM - Re: Re: fuel shut off valve overhaul (W J R HAMILTON) 2. 07:52 AM - Re: Attention Allan Hoffman (alh1@juno.com) ________________________________ Message 1 _____________________________________ Time: 03:09:43 AM PST US From: W J R HAMILTON Subject: Re: Commander-List: re: fuel shut off valve overhaul --> Commander-List message posted by: W J R HAMILTON Folks, Whoever it was asking about internal mouldings, window linings etc for various AC, the details are below, sorry, but I probably erased the original message. I have used their wingtip light covers, I have seen the internal window surrounds in another 500A, they looked good, they appear to have plenty of dimension to allow trimming for an individual fit. Cheers, Bill Hamilton. Aero Plastics and Structures 105a9b.jpg Address 42 Leyland Street TOWNSVILLE QLD 4814 Phone 07 4775 1699 Fax 07 4728 8507 Email apas@ozemail.com.au Web Site http://www.aeroplastic_citysearch.com.au 105a9b.jpg Contact Mr Rex Goadby Title Managing Director Email apas@ozemail.com.au 105a9b.jpg Description Manufacture of aircraft components, interior components for the airline industry. 105a9b.jpg 105a9b.jpg Capabilities * Moulded interior trim Meal trays,including bi fold types. Seat mouldings. Window surrounds. Inner scratch panes. Nav light lens covers Landing light lens covers 105a9b.jpg 105a9b.jpg 105bc7.jpg 105c0d.jpg At 04:37 15/02/2004, you wrote: >--> Commander-List message posted by: "Scott Dickey" > >Hi, > > >Fuel gate valves can be overhauled by Aircraft Accessories in OK. >800-255-9924. Cost is about $450. Aircraft Accessories overhauls just about >all other valves and related components such as hydraulic pumps, de-ice >valves, etc. They do a good job and their warranty policy is excellent - no >questions asked, they just make it right ASAP. > > >Here is some other component overhaul repair trivia: > > >Power brake valves - if the bore of your power brake valve cylinder is worn >beyond limits and resealing didn't stop the leaks, you can buy a new one >from TCAC for about $4000 or Higher Planes of Conroe, TX (936-494-1717) will >use their FAA approved process to re-anodize the bore to new limits. Cost is >about $2500. > > >3:1 gauges - These can be done by a variety of companies, but Aero Motive >Equipment of Oklahoma City, OK has a good supply of parts and can completely >rebuild, remark, and match your 3:1 gauges. Kelley Instruments of Wichita, >KS can probably do it also. Kelley is a good source for gyros and other >stuff like a/s indicators. I had them re-mark my a/s indicator in knots and >add blue/red lines. > > >Question: Does anyone know where to get a windshield hotplate >repaired/overhauled? > > >Scott > > COMMUNICATIONS CHANGES: All Recipients Please Note. The new email address for all Glenalmond Group Companies, W.J.R.Hamilton, Fighter Flights Internet Services and Warbirds.Net is: will remain valid for about three months. All phone numbers remain unchanged, but changes will take place in about three months, the date will be notified. ________________________________ Message 2 _____________________________________ Time: 07:52:24 AM PST US Subject: Re: Commander-List: Attention Allan Hoffman From: alh1@juno.com --> Commander-List message posted by: alh1@juno.com barry, it is alh1@juno.com you omitted the @. i have another address that i use for personal mail and you are welcome to use that, ahoffman1@hotmail.com. looking forward to hearing from you. al hoffman