---------------------------------------------------------- Commander-List Digest Archive --- Total Messages Posted Tue 01/04/05: 10 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:07 AM - Re: NEED COMMANDER SEAT BELT. () 2. 05:54 AM - Re: 680 FP owner's manual (MASON CHEVAILLIER) 3. 07:59 AM - Looking for cylinders (Chris Schuermann) 4. 08:13 AM - Re: Looking for cylinders (YOURTCFG@aol.com) 5. 08:31 AM - Re: Looking for cylinders (Brock Lorber) 6. 08:34 AM - Re: Looking for cylinders (Chris Schuermann) 7. 08:51 AM - Re: 680 FP owner's manual (nico css) 8. 02:55 PM - Goodyear brake pucks (Deneal Schilmeister (iMac)) 9. 08:25 PM - Re: Looking for cylinders (YOURTCFG@aol.com) 10. 11:27 PM - Re: Goodyear brake pucks (Bruce Campbell) ________________________________ Message 1 _____________________________________ Time: 04:07:30 AM PST US From: Subject: RE: Commander-List: NEED COMMANDER SEAT BELT. --> Commander-List message posted by: I can check our supply. Gary Commander Aero -----Original Message----- From: owner-commander-list-server@matronics.com [mailto:owner-commander-list-server@matronics.com]On Behalf Of Moe Subject: Commander-List: NEED COMMANDER SEAT BELT. --> Commander-List message posted by: "Moe" Commander Drivers: I need one only seat belt for an Aero Commander. The web part can be total junk, however the buckle and the flat sheet metal piece that inserts into the buckle must be serviceable. The buckle is stamped "American Safety 5000B3" and the piece that inserts into the buckle has no markings at all. I do not need the two pieces that bolt to the seat. Anyone have an extra that they would be willing to sell? Moe Mills N680RR ________________________________ Message 2 _____________________________________ Time: 05:54:12 AM PST US From: "MASON CHEVAILLIER" Subject: Re: Commander-List: 680 FP owner's manual Seal-Send-Time: Tue, 4 Jan 2005 07:53:02 -0600 --> Commander-List message posted by: "MASON CHEVAILLIER" N, YOU CAN ORDER ONE FROM TWIN COMMANDER. MASON ----- Original Message ----- From: nico css To: commander-list@matronics.com Sent: Monday, January 03, 2005 9:13 PM Subject: Commander-List: 680 FP owner's manual --> Commander-List message posted by: "nico css" > I still have an owner's manual of a 680 FP. If there is enough interest, I would like to reprint it and make it available to members. Anyone wish to have a copy? Let me know. Thanks Nico ----- Original Message ----- From: "Moe" > To: > Subject: Commander-List: NEED COMMANDER SEAT BELT. > --> Commander-List message posted by: "Moe" > > > Commander Drivers: > > I need one only seat belt for an Aero Commander. The web part can be total junk, however the buckle and the flat sheet metal piece that inserts into the buckle must be serviceable. The buckle is stamped "American Safety 5000B3" and the piece that inserts into the buckle has no markings at all. I do not need the two pieces that bolt to the seat. > > Anyone have an extra that they would be willing to sell? > > Moe Mills > N680RR > > ________________________________ Message 3 _____________________________________ Time: 07:59:49 AM PST US From: Chris Schuermann Subject: Commander-List: Looking for cylinders --> Commander-List message posted by: Chris Schuermann I'm hunting for some good, used cylinders. If anyone has anything, please let me know. I'm looking for some clean, low-time narrow-deck Lycoming O-540 jugs. Must be under 1000hrs total time and suitable for overhaul (no cracks). Thanks, Chris ________________________________ Message 4 _____________________________________ Time: 08:13:02 AM PST US From: YOURTCFG@aol.com Subject: Re: Commander-List: Looking for cylinders --> Commander-List message posted by: YOURTCFG@aol.com In a message dated 1/4/2005 8:00:06 AM Pacific Standard Time, cschuerm@cox.net writes: I'm hunting for some good, used cylinders. If anyone has anything, please let me know. I'm looking for some clean, low-time narrow-deck Lycoming O-540 jugs. Must be under 1000hrs total time and suitable for overhaul (no cracks). Angle or parallel?? I thought you only use new?? Hope all is well this new year. jb ________________________________ Message 5 _____________________________________ Time: 08:31:36 AM PST US From: "Brock Lorber" Subject: RE: Commander-List: Looking for cylinders --> Commander-List message posted by: "Brock Lorber" Chris: Try John Jackson at Pacific Continental Engines. 818-781-4947 He has good stock of jugs and the contacts to find others. Brock -----Original Message----- From: owner-commander-list-server@matronics.com [mailto:owner-commander-list-server@matronics.com] On Behalf Of Chris Schuermann Subject: Commander-List: Looking for cylinders --> Commander-List message posted by: Chris Schuermann I'm hunting for some good, used cylinders. If anyone has anything, please let me know. I'm looking for some clean, low-time narrow-deck Lycoming O-540 jugs. Must be under 1000hrs total time and suitable for overhaul (no cracks). Thanks, Chris ________________________________ Message 6 _____________________________________ Time: 08:34:49 AM PST US From: Chris Schuermann Subject: Re: Commander-List: Looking for cylinders --> Commander-List message posted by: Chris Schuermann YOURTCFG@aol.com wrote: > Angle or parallel?? I thought you only use new?? Hope all is well this new > year. jb Howdy Jim. Need parallel's for the piper. You're SO right.... It's killing me not to be able to put new jugs on these engines, but the difference between 12 overhauled and 12 new is about $8500 and I just havn't managed to come up with the money. Still hoping the bids will climb a bit higher for that kidney I've got on ebay :-) We inspected the 12 cylinders off my existing engines. They were all first run 2000 hour jugs from a factory "zero-time" reman. About half of them had cracks. I'm not willing to put welded-up cylinders back on, so I'm looking for some good cores to overhaul. Figure there were a lot of damaged birds from all the hurricanes this year and there just must be some good, low-time jugs on the market. cheers, Chris ________________________________ Message 7 _____________________________________ Time: 08:51:14 AM PST US From: "nico css" Subject: Re: Commander-List: 680 FP owner's manual --> Commander-List message posted by: "nico css" Thanks for the info, Mason. That'll take care of it. I'll keep my copy, then, it has my fingerprints all over it. Nico ----- Original Message ----- From: "MASON CHEVAILLIER" Subject: Re: Commander-List: 680 FP owner's manual > --> Commander-List message posted by: "MASON CHEVAILLIER" > > N, YOU CAN ORDER ONE FROM TWIN COMMANDER. MASON > ----- Original Message ----- > From: nico css > To: commander-list@matronics.com > Sent: Monday, January 03, 2005 9:13 PM > Subject: Commander-List: 680 FP owner's manual > > > --> Commander-List message posted by: "nico css" > > > I still have an owner's manual of a 680 FP. If there is enough interest, I > would like to reprint it and make it available to members. Anyone wish to > have a copy? > Let me know. > Thanks > Nico > > > ----- Original Message ----- > From: "Moe" > > To: > > Subject: Commander-List: NEED COMMANDER SEAT BELT. > > > > --> Commander-List message posted by: "Moe" > > > > > Commander Drivers: > > > > I need one only seat belt for an Aero Commander. The web part can be > total junk, however the buckle and the flat sheet metal piece that inserts > into the buckle must be serviceable. The buckle is stamped "American Safety > 5000B3" and the piece that inserts into the buckle has no markings at all. > I do not need the two pieces that bolt to the seat. > > > > Anyone have an extra that they would be willing to sell? > > > > Moe Mills > > N680RR > > > > > > ________________________________ Message 8 _____________________________________ Time: 02:55:52 PM PST US Subject: Commander-List: Goodyear brake pucks From: "Deneal Schilmeister (iMac)" --> Commander-List message posted by: "Deneal Schilmeister (iMac)" Wasn't someone just looking for these? http://tinyurl.com/4jjw7 -- Deneal Schilmeister ATP Learjet St. Louis, Missouri USA http://homepage.mac.com/deneals ________________________________ Message 9 _____________________________________ Time: 08:25:39 PM PST US From: YOURTCFG@aol.com Subject: Re: Commander-List: Looking for cylinders --> Commander-List message posted by: YOURTCFG@aol.com In a message dated 1/4/2005 8:35:31 AM Pacific Standard Time, cschuerm@cox.net writes: Figure there were a lot of damaged birds from all the hurricanes this year and there just must be some good, low-time jugs on the market. Good plan. I had some angle vales, but on straight, sorry. jb ________________________________ Message 10 ____________________________________ Time: 11:27:42 PM PST US From: "Bruce Campbell" Subject: Re: Commander-List: Goodyear brake pucks --> Commander-List message posted by: "Bruce Campbell" Thakn you Bruce Campbell ----- Original Message ----- From: "Deneal Schilmeister (iMac)" Subject: Commander-List: Goodyear brake pucks > --> Commander-List message posted by: "Deneal Schilmeister (iMac)" > > Wasn't someone just looking for these? > > http://tinyurl.com/4jjw7 > > > -- > Deneal Schilmeister ATP Learjet > St. Louis, Missouri USA > > http://homepage.mac.com/deneals > >