---------------------------------------------------------- Commander-List Digest Archive --- Total Messages Posted Wed 03/16/05: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:05 AM - Re: cleveland brakes on AC560 (Avtec2) 2. 06:27 AM - Re: cleveland brakes on AC560 (Avtec2) ________________________________ Message 1 _____________________________________ Time: 05:05:49 AM PST US From: "Avtec2" Subject: Re: Commander-List: cleveland brakes on AC560 --> Commander-List message posted by: "Avtec2" ----- Original Message ----- From: "Daniel Stewart" Subject: Re: Commander-List: cleveland brakes on AC560 > --> Commander-List message posted by: Daniel Stewart > > > I think the kicker is "approved commanders" Mine is a straight 560. > > STC SA290GL is for 560F and STC SA303GL is for 560A/E. > > Is a field approval my only option? > > Dan > > > YOURTCFG@aol.com wrote: > --> Commander-List message posted by: YOURTCFG@aol.com > > > In a message dated 2/25/2005 9:34:31 A.M. Pacific Standard Time, > dstewart7777@yahoo.com writes: > > Who can tell me the Cleveland model number for the single caliper brakes > used on the lighter Commanders? > > > The single caliper brake kit for the short Commander (560A - 680FP) is a > 199-88 kit. This is for the Beech 50 series (Twin Bonanza). It is an > IDENTICAL > kit to the 199-74 kit that was approved some years back, but discontinued > (for reasons that are unclear). > Cleveland has given me permission to supply all of the paperwork to > install to 199-88/199-74 kit on approved shot Commanders. > There is no cost for this paperwork to TCFG members, $100.00 for non > members. Hope this helps. jb > > > --------------------------------- > > > ________________________________ Message 2 _____________________________________ Time: 06:27:10 AM PST US From: "Avtec2" Subject: Re: Commander-List: cleveland brakes on AC560 --> Commander-List message posted by: "Avtec2" Please send ne a fax number or you mailing address Harry I Had A field Approval on a 560 for a 199-80 Kit Harry 321 267-3141 ----- Original Message ----- From: "Avtec2" Subject: Re: Commander-List: cleveland brakes on AC560 > --> Commander-List message posted by: "Avtec2" > > > ----- Original Message ----- > From: "Daniel Stewart" > To: > Subject: Re: Commander-List: cleveland brakes on AC560 > > >> --> Commander-List message posted by: Daniel Stewart >> >> >> I think the kicker is "approved commanders" Mine is a straight 560. >> >> STC SA290GL is for 560F and STC SA303GL is for 560A/E. >> >> Is a field approval my only option? >> >> Dan >> >> >> YOURTCFG@aol.com wrote: >> --> Commander-List message posted by: YOURTCFG@aol.com >> >> >> In a message dated 2/25/2005 9:34:31 A.M. Pacific Standard Time, >> dstewart7777@yahoo.com writes: >> >> Who can tell me the Cleveland model number for the single caliper brakes >> used on the lighter Commanders? >> >> >> The single caliper brake kit for the short Commander (560A - 680FP) is a >> 199-88 kit. This is for the Beech 50 series (Twin Bonanza). It is an >> IDENTICAL >> kit to the 199-74 kit that was approved some years back, but discontinued >> (for reasons that are unclear). >> Cleveland has given me permission to supply all of the paperwork to >> install to 199-88/199-74 kit on approved shot Commanders. >> There is no cost for this paperwork to TCFG members, $100.00 for non >> members. Hope this helps. jb >> >> >> --------------------------------- >> >> >> > > >