----------------------------------------------------------
                           Commander-List Digest Archive
                                      ---
                     Total Messages Posted Thu 05/05/05:4
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 04:31 AM - Re: Copilot window  (Avtec2)
     2. 07:06 AM - Re: Shrike Yokes?  (Moe)
     3. 07:09 AM - Re: Copilot window  (Moe)
     4. 08:21 AM - Re: Copilot window  (Tom Fisher)
 
 
 
________________________________  Message 1  _____________________________________


Time: 04:31:42 AM PST US
From: "Avtec2" <avtec2@bellsouth.net>
Subject: Re: Commander-List: Copilot window

--> Commander-List message posted by: "Avtec2" <avtec2@bellsouth.net>

Aircenter, Inc.
Gary
423-893-5444
aircenter@aol.com

----- Original Message ----- 
From: "Tom Fisher" <tfisher@commandergroup.bc.ca>
Subject: Commander-List: Copilot window


> --> Commander-List message posted by: "Tom Fisher" 
> <tfisher@commandergroup.bc.ca>
>
> Hi Folks,
>
> I want to replace my badly glazed copilot side window that does not 
> currently have a vent window within it.
> The replacement needs to have the vent window in it.
> Any suggestions as to where to source this?
>
> Tom F.
> 680FLP Mr.RPM C-GISS
>
>
> 






________________________________  Message 2  _____________________________________


Time: 07:06:48 AM PST US
From: "Moe" <moe@rosspistons.com>
Subject: Re: Commander-List: Shrike Yokes?

--> Commander-List message posted by: "Moe" <moe@rosspistons.com>

Alan,
Commander Aero in Ohio just changed the yokes in my 680F(p) as part of the
autopilot install.  You might contact Gary there.  The old skinny yokes did
not have enough holes for all of the switches that the Century autopilot
required.  They were able to supply two good used ones that they
re-conditioned, and they really look great!

The web email address for Gary is service@commander-aero.

Moe Mills
N680RR
680F(p)
----- Original Message ----- 
From: "Alan Kucheck" <akucheck@hotmail.com>
Subject: Commander-List: Shrike Yokes?


> --> Commander-List message posted by: "Alan Kucheck"
<akucheck@hotmail.com>
>
> So what is the deal on swapping in a Shrike yoke?  My pilot side has a
> Shrike-style yoke and co-pilot is the old skinny style.  I assume this
> requires a field approval, right?
>
> Does anyone have a line on one? What might one cost?
>
> Thanks,
>
> Alan
>
> -- 
>
>






________________________________  Message 3  _____________________________________


Time: 07:09:57 AM PST US
From: "Moe" <moe@rosspistons.com>
Subject: Re: Commander-List: Copilot window

--> Commander-List message posted by: "Moe" <moe@rosspistons.com>

Tom,

Did anyone ever make a vented copilot side window for a pressurized
commander?  I can't remember seeing one, however if you find one please
advise, as this would really be nice here in the Great Southwest in the
summer.

Moe Mills
N680RR
680F(p)
----- Original Message ----- 
From: "Tom Fisher" <tfisher@commandergroup.bc.ca>
Subject: Commander-List: Copilot window


> --> Commander-List message posted by: "Tom Fisher"
<tfisher@commandergroup.bc.ca>
>
> Hi Folks,
>
> I want to replace my badly glazed copilot side window that does not
currently have a vent window within it.
> The replacement needs to have the vent window in it.
> Any suggestions as to where to source this?
>
> Tom F.
> 680FLP Mr.RPM C-GISS
>
>






________________________________  Message 4  _____________________________________


Time: 08:21:18 AM PST US
From: "Tom Fisher" <tfisher@commandergroup.bc.ca>
Subject: Re: Commander-List: Copilot window

--> Commander-List message posted by: "Tom Fisher" <tfisher@commandergroup.bc.ca>

Gary at Aircenter, Inc. (423-893-5444)  has an STC for the "500 & 600
series" which will cover the 680FLP.
I am ordering one for each side as the new windows are "frameless" and the
current pilot's side is not.  Besides the pilot's side leaks a bit and the
metal pressure seal is bent as well.
Call Gary for pricing.

Tom F.

----- Original Message -----
From: "Moe" <moe@rosspistons.com>
Subject: Re: Commander-List: Copilot window


> --> Commander-List message posted by: "Moe" <moe@rosspistons.com>
>
> Tom,
>
> Did anyone ever make a vented copilot side window for a pressurized
> commander?  I can't remember seeing one, however if you find one please
> advise, as this would really be nice here in the Great Southwest in the
> summer.
>
> Moe Mills
> N680RR
> 680F(p)
> ----- Original Message -----
> From: "Tom Fisher" <tfisher@commandergroup.bc.ca>
> To: <commander-list@matronics.com>
> Subject: Commander-List: Copilot window
>
>
> > --> Commander-List message posted by: "Tom Fisher"
> <tfisher@commandergroup.bc.ca>
> >
> > Hi Folks,
> >
> > I want to replace my badly glazed copilot side window that does not
> currently have a vent window within it.
> > The replacement needs to have the vent window in it.
> > Any suggestions as to where to source this?
> >
> > Tom F.
> > 680FLP Mr.RPM C-GISS
> >
> >
>
>