---------------------------------------------------------- Commander-List Digest Archive --- Total Messages Posted Tue 12/13/05: 2 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 08:37 AM - Re: Documentation + (Tom Fisher) 2. 10:03 PM - Re: Documentation + (BillLeff1@aol.com) ________________________________ Message 1 _____________________________________ Time: 08:37:40 AM PST US From: "Tom Fisher" Subject: Re: Commander-List: Documentation + --> Commander-List message posted by: "Tom Fisher" The line goes from the fuel pump to the fuel flow indicator. C-GISS is a 680FLP (Mr. RPM) but is not (and most likely will not be) pressurized due to camera ports and modifications to the rear bulkhead made to accommodate a magnetometer. I believe the conversion was made by Mcoon (sp?) leaving the Skydrol system. I have seen a reference to the STC but the actual document? no I have not seen that. Tom F. ----- Original Message ----- From: Subject: Re: Commander-List: Documentation + > --> Commander-List message posted by: BillLeff1@aol.com > > Since I have not seen it personally I am just guessing. But the line you are > describing may be the pressurization line for the magnetos. Yes, the > magnetos were pressurized on some installations. This was done to prevent arcing in > the distributor block since the contacts were closer together than on a 6 > cylinder mag. The pressurization for the cabin was a large line that went > through the fire wall and had a electric shut off valve.. > > Is your aircraft a F,FP, FLP or a FL?. Was this an conversion that was done > using parts from another aircraft? Also, do you have a copy of the original > STC in your aircraft records? > > Bill Leff > > ________________________________ Message 2 _____________________________________ Time: 10:03:44 PM PST US From: BillLeff1@aol.com Subject: Re: Commander-List: Documentation + --> Commander-List message posted by: BillLeff1@aol.com Oh, you have Brucelandair's aircraft. I am familiar with it and have worked on it before. It is a legal conversion as far as I know. It does have some interesting mod's on it. You said that you were having problems setting up the engines. What type problems are you having? Bill Leff