---------------------------------------------------------- Commander-List Digest Archive --- Total Messages Posted Wed 01/18/06: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:29 AM - Re: Re: Shrike nose (Jerry Sprayberry) 2. 06:29 AM - 560 being scrapped (Barry Collman) 3. 07:52 AM - FW: Overhead panels (Ricardo Otaola) 4. 08:01 AM - Re: FW: Overhead panels (BillLeff1@aol.com) 5. 10:15 AM - Shrike for salvage bid (Barry Collman) 6. 01:32 PM - Re: FW: Overhead panels (Ricardo Otaola) ________________________________ Message 1 _____________________________________ Time: 04:29:40 AM PST US From: "Jerry Sprayberry" Subject: Re: Commander-List: Re: Shrike nose --> Commander-List message posted by: "Jerry Sprayberry" Good to know that, even though I have painted mine, so I guess the paint is not the answer. JRS: ----- Original Message ----- From: Sent: Wednesday, January 18, 2006 1:00 AM Subject: Re: Commander-List: Re: Shrike nose > --> Commander-List message posted by: YOURTCFG@aol.com > > > In a message dated 1/17/2006 6:54:13 A.M. Pacific Standard Time, > capnspray_611@hotmail.com writes: > > Pictures of N198JW 50FT. in the > air, 1000FT from start of take-off from my 1900 FT grass strip 800 Ft > > > Without the gap seals it would have been 150 feet at the same spot;-) jb > > > ________________________________ Message 2 _____________________________________ Time: 06:29:00 AM PST US From: "Barry Collman" Subject: Commander-List: 560 being scrapped --> Commander-List message posted by: "Barry Collman" Hi All, If anyone is interested in possibly getting parts, I understand that cancellation of Model 560, msn 168, N747DT is beyond economical repair and is being scrapped. The cancellation request was from one of the co-owners, Butterfield Airplane Store Inc., of 2450 Montecito Road, Ramona, CA. Letter was signed by: Mark D Hinzman, President, 19 NOrth West Street, Yerington, NV The last I knew of this Commander was when it was noted at Chino, CA in June 2001. Best Regards, Barry C. ________________________________ Message 3 _____________________________________ Time: 07:52:49 AM PST US From: "Ricardo Otaola" Subject: Commander-List: FW: Overhead panels --> Commander-List message posted by: "Ricardo Otaola" _____ From: Ricardo Otaola Sent: Wednesday, January 18, 2006 11:49 AM Subject: Overhead panels Friends: Someone mentioned a company or group, that makes the opverhead panels for commanders. Perhaps you can send info, so that I can replace my original 680F overheads. Ricardo A. Otaola Presidente Telecomunicaciones Bantel, C.A. www.bantel.com.ve www.bantelbas.com ________________________________ Message 4 _____________________________________ Time: 08:01:07 AM PST US From: BillLeff1@aol.com Subject: Re: Commander-List: FW: Overhead panels --> Commander-List message posted by: BillLeff1@aol.com Are yours damaged or just need refinishing? Bill Leff ________________________________ Message 5 _____________________________________ Time: 10:15:12 AM PST US From: "Barry Collman" Subject: Commander-List: Shrike for salvage bid --> Commander-List message posted by: "Barry Collman" Hi Guys, Hurricane "Wilma" (when was that?), caused a hangar collapse, I think at Pompano Beach, but Shrike sn 3054, N9005N, was damaged. AIG Aviation are asking for bids on the aircraft. Fuller details can be found at: http://www.aigaviation.com/salvage/Salvagecraftzq.aspx Front doors are scarce - this one was built with one! Very Best Regards, Barry C. ________________________________ Message 6 _____________________________________ Time: 01:32:35 PM PST US From: "Ricardo Otaola" Subject: RE: Commander-List: FW: Overhead panels --> Commander-List message posted by: "Ricardo Otaola" refinishing -----Original Message----- From: owner-commander-list-server@matronics.com [mailto:owner-commander-list-server@matronics.com] On Behalf Of BillLeff1@aol.com Sent: Wednesday, January 18, 2006 11:55 AM Subject: Re: Commander-List: FW: Overhead panels --> Commander-List message posted by: BillLeff1@aol.com Are yours damaged or just need refinishing? Bill Leff