---------------------------------------------------------- Commander-List Digest Archive --- Total Messages Posted Fri 02/10/06: 12 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:31 AM - Re: Bungees (Donnie Rose) 2. 07:03 AM - Re: Bungees (Moe) 3. 07:55 AM - Re: Bungees (Tom Fisher) 4. 08:29 AM - Re: Bungees () 5. 08:52 AM - Re: Bungees () 6. 12:01 PM - Re: Bungees (KenWHyde@AOL.COM) 7. 12:05 PM - Re: Bungees (KenWHyde@aol.com) 8. 12:17 PM - Re: Bungees (Tom Fisher) 9. 12:17 PM - Re: Bungees (Tom Fisher) 10. 01:05 PM - Oil Filter conversion (Craig Lundborg) 11. 03:12 PM - Re: Oil Filter conversion (Alan Kucheck) 12. 04:13 PM - Re: Oil Filter conversion (Moe) ________________________________ Message 1 _____________________________________ Time: 06:31:11 AM PST US From: Donnie Rose Subject: Re: Commander-List: Bungees --> Commander-List message posted by: Donnie Rose Good Morning Mr. Fisher, There isa a place in Mississipi that custom builds the bungees. I will talk with someone today for the name. Regards, Donnie Rose --- Tom Fisher wrote: > --> Commander-List message posted by: "Tom Fisher" > > > Hello all, > > Now that I have my Skydrol leak plugged I need to > replace the bungees on that side as the Skydrol > saturated the existing bungees. > > Right now I only need one set (2 bungees) does > anyone have any or know of a source? > > Thanks. > > Tom F. > C-GISS 680FLP (Mr.RPM) > > > > > browse > Subscriptions page, > FAQ, > http://www.matronics.com/Navigator?Commander-List > > Admin. > > > > > > > > > > > Donnie Rose 205/492-8444 ________________________________ Message 2 _____________________________________ Time: 07:03:53 AM PST US From: "Moe" Subject: Re: Commander-List: Bungees --> Commander-List message posted by: "Moe" Tom. My guy has been replacing them every year at annual, and the charge has been very minimal. If you do not get an answer from another member today, tell me and I will get the name and contact information Monday morning. Regards, Moe ----- Original Message ----- From: "Donnie Rose" Sent: Friday, February 10, 2006 6:29 AM Subject: Re: Commander-List: Bungees > --> Commander-List message posted by: Donnie Rose > > Good Morning Mr. Fisher, > There isa a place in Mississipi that custom builds the > bungees. I will talk with someone today for the name. > Regards, > Donnie Rose > > --- Tom Fisher wrote: > > > --> Commander-List message posted by: "Tom Fisher" > > > > > > Hello all, > > > > Now that I have my Skydrol leak plugged I need to > > replace the bungees on that side as the Skydrol > > saturated the existing bungees. > > > > Right now I only need one set (2 bungees) does > > anyone have any or know of a source? > > > > Thanks. > > > > Tom F. > > C-GISS 680FLP (Mr.RPM) > > > > > > > > > > browse > > Subscriptions page, > > FAQ, > > http://www.matronics.com/Navigator?Commander-List > > > > Admin. > > > > > > > > > > > > > > > > > > > > > > > > > Donnie Rose > 205/492-8444 > > ________________________________ Message 3 _____________________________________ Time: 07:55:43 AM PST US From: "Tom Fisher" Subject: Re: Commander-List: Bungees --> Commander-List message posted by: "Tom Fisher" Harry, Are they considered "approved" parts? Tom F. ----- Original Message ----- From: Sent: Thursday, February 09, 2006 13:54 Subject: Re: Commander-List: Bungees > --> Commander-List message posted by: > > Spruce > Part Number 9044 > Harry > ----- Original Message ----- > From: "Tom Fisher" > To: > Sent: Thursday, February 09, 2006 4:05 PM > Subject: Commander-List: Bungees > > > > --> Commander-List message posted by: "Tom Fisher" > > > > > > Hello all, > > > > Now that I have my Skydrol leak plugged I need to replace the bungees on > > that side as the Skydrol saturated the existing bungees. > > > > Right now I only need one set (2 bungees) does anyone have any or know of > > a source? > > > > Thanks. > > > > Tom F. > > C-GISS 680FLP (Mr.RPM) > > > > > > > > > > > > > > > > > > > > > > > > > > ________________________________ Message 4 _____________________________________ Time: 08:29:06 AM PST US From: Subject: Re: Commander-List: Bungees --> Commander-List message posted by: Aircraft Spruce Part number is 9044 cost less than $20.00 Each Harry ----- Original Message ----- From: "Moe" Sent: Friday, February 10, 2006 9:59 AM Subject: Re: Commander-List: Bungees > --> Commander-List message posted by: "Moe" > > Tom. > > My guy has been replacing them every year at annual, and the charge has > been > very minimal. If you do not get an answer from another member today, tell > me and I will get the name and contact information Monday morning. > > Regards, > > Moe > ----- Original Message ----- > From: "Donnie Rose" > To: > Sent: Friday, February 10, 2006 6:29 AM > Subject: Re: Commander-List: Bungees > > >> --> Commander-List message posted by: Donnie Rose >> >> Good Morning Mr. Fisher, >> There isa a place in Mississipi that custom builds the >> bungees. I will talk with someone today for the name. >> Regards, >> Donnie Rose >> >> --- Tom Fisher wrote: >> >> > --> Commander-List message posted by: "Tom Fisher" >> > >> > >> > Hello all, >> > >> > Now that I have my Skydrol leak plugged I need to >> > replace the bungees on that side as the Skydrol >> > saturated the existing bungees. >> > >> > Right now I only need one set (2 bungees) does >> > anyone have any or know of a source? >> > >> > Thanks. >> > >> > Tom F. >> > C-GISS 680FLP (Mr.RPM) >> > >> > >> > >> > >> > browse >> > Subscriptions page, >> > FAQ, >> > http://www.matronics.com/Navigator?Commander-List >> > >> > Admin. >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> >> >> Donnie Rose >> 205/492-8444 >> >> >> >> >> >> >> >> >> >> >> >> >> >> > > > ________________________________ Message 5 _____________________________________ Time: 08:52:34 AM PST US From: Subject: Re: Commander-List: Bungees --> Commander-List message posted by: Yes Sir Dont let any body make them unless thay are PMA Harry ----- Original Message ----- From: "Tom Fisher" Sent: Friday, February 10, 2006 10:46 AM Subject: Re: Commander-List: Bungees > --> Commander-List message posted by: "Tom Fisher" > > > Harry, > Are they considered "approved" parts? > Tom F. > > ----- Original Message ----- > From: > To: > Sent: Thursday, February 09, 2006 13:54 > Subject: Re: Commander-List: Bungees > > >> --> Commander-List message posted by: >> >> Spruce >> Part Number 9044 >> Harry >> ----- Original Message ----- >> From: "Tom Fisher" >> To: >> Sent: Thursday, February 09, 2006 4:05 PM >> Subject: Commander-List: Bungees >> >> >> > --> Commander-List message posted by: "Tom Fisher" >> > >> > >> > Hello all, >> > >> > Now that I have my Skydrol leak plugged I need to replace the bungees >> > on >> > that side as the Skydrol saturated the existing bungees. >> > >> > Right now I only need one set (2 bungees) does anyone have any or know > of >> > a source? >> > >> > Thanks. >> > >> > Tom F. >> > C-GISS 680FLP (Mr.RPM) >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> > > > ________________________________ Message 6 _____________________________________ Time: 12:01:56 PM PST US From: KenWHyde@AOL.COM Subject: Re: Commander-List: Bungees --> Commander-List message posted by: KenWHyde@aol.com Wag-Aero 800-558-6868 has shock cords for all models of the Aero-Commander. Ken Hyde N47AC ________________________________ Message 7 _____________________________________ Time: 12:05:10 PM PST US From: KenWHyde@aol.com Subject: Re: Commander-List: Bungees --> Commander-List message posted by: KenWHyde@aol.com Aircraft Spruce 877 477-7823 has #9044 shock cords ________________________________ Message 8 _____________________________________ Time: 12:17:06 PM PST US From: "Tom Fisher" Subject: Re: Commander-List: Bungees --> Commander-List message posted by: "Tom Fisher" None in stock until next week @ $15.50 ea. Thanks again. Tom F. ----- Original Message ----- From: Sent: Friday, February 10, 2006 12:04 Subject: Re: Commander-List: Bungees > --> Commander-List message posted by: KenWHyde@aol.com > > Aircraft Spruce 877 477-7823 has #9044 shock cords > > > > > > > > > > > > > > > > > ________________________________ Message 9 _____________________________________ Time: 12:17:06 PM PST US From: "Tom Fisher" Subject: Re: Commander-List: Bungees --> Commander-List message posted by: "Tom Fisher" 2 in stock @ $22.15 ea. Tank you. Tom F. ----- Original Message ----- From: Sent: Friday, February 10, 2006 12:00 Subject: Re: Commander-List: Bungees > --> Commander-List message posted by: KenWHyde@aol.com > > Wag-Aero 800-558-6868 has shock cords for all models of the Aero-Commander. > > Ken Hyde > N47AC > > ________________________________ Message 10 ____________________________________ Time: 01:05:13 PM PST US From: Craig Lundborg Subject: Commander-List: Oil Filter conversion --> Commander-List message posted by: Craig Lundborg Anyone have a source for a conversion to install a spin on oil filter direct to a IO-470 in my 500A? Craig Lundborg ________________________________ Message 11 ____________________________________ Time: 03:12:19 PM PST US From: Alan Kucheck Subject: Re: Commander-List: Oil Filter conversion --> Commander-List message posted by: Alan Kucheck Craig: This is what I used on my IO-470 on my Debonair. I now have the version for the -520s on my 500A Colemill. Love 'em. ak http://www.fm-enterprises.com/product.html On 2/10/06, Craig Lundborg wrote: > > --> Commander-List message posted by: Craig Lundborg < > dltafolk@sbcglobal.net> > > Anyone have a source for a conversion to install a spin on oil filter > direct to a IO-470 in my 500A? > > Craig Lundborg > > ________________________________ Message 12 ____________________________________ Time: 04:13:20 PM PST US From: "Moe" Subject: Re: Commander-List: Oil Filter conversion --> Commander-List message posted by: "Moe" Craig, We did it on my 680F(p) with IGSO540B engines with a one time field approval. Fairly quick and easy. If you want additional info. email me. Moe ----- Original Message ----- From: "Craig Lundborg" Sent: Friday, February 10, 2006 1:03 PM Subject: Commander-List: Oil Filter conversion > --> Commander-List message posted by: Craig Lundborg > > Anyone have a source for a conversion to install a spin on oil filter direct to a IO-470 in my 500A? > > Craig Lundborg > >