Today's Message Index:
----------------------
1. 12:04 AM - Re: If Ted Smith were Italian... (W J R HAMILTON)
2. 12:05 AM - Re: Fw: Rules Of Engagement (W J R HAMILTON)
3. 12:51 AM - Re: Contact (W J R HAMILTON)
4. 01:34 AM - Re: Oil Filter conversion (W J R HAMILTON)
5. 05:03 AM - Re: Contact (steve)
6. 09:07 AM - Re: Bungees (Tom Fisher)
7. 09:17 AM - Re: Bungees (CloudCraft@aol.com)
8. 10:27 AM - Re: Bungees (Randy Dettmer, AIA)
9. 10:28 AM - Re: Bungees (Don Girod)
10. 10:43 AM - Re: Bungees ()
11. 10:44 AM - Re: Bungees (John Vormbaum)
12. 10:47 AM - Re: Bungees (Tom Fisher)
13. 11:27 AM - Re: Bungees (Tom Fisher)
14. 12:21 PM - Re: Bungees (CloudCraft@aol.com)
15. 03:27 PM - Re: Bungees (Jerry Sprayberry)
16. 03:38 PM - Re: Bungees (Jerry Sprayberry)
17. 08:02 PM - Re: If Ted Smith were Italian... (YOURTCFG@aol.com)
18. 08:43 PM - Re: Bungees (Alan Kucheck)
19. 10:06 PM - Re: Bungees (Craig Lundborg)
20. 10:43 PM - Re: Bungees (Tom Fisher)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: If Ted Smith were Italian... |
--> Commander-List message posted by: W J R HAMILTON <wjrhamilton@optusnet.com.au>
Folks,
But don't use your Lawngator to tow an AT-28D, the 'gator just
doesn't weigh very much, which is, I guess, is why it is so good
across soft turf.
No! It wasn't me that tried it, my old Clark would tow a 737.
Cheers,
Bill Hamilton
At 18:32 13/02/2006, you wrote:
>--> Commander-List message posted by: <rlegg@austarnet.com.au>
>
>G'day Folks,
>
>If Ted Smith had built "ride on mowers" or tractors I reckon he would have
>had the John Deere range.
>
>I love my green and gold John Deere!
>
>Cheers
>
>Russell
>(PS Still searching for a 560E/500/680E...not necessarily green/gold!)
>
>
>---- Original message ----
> >Date: Sat, 11 Feb 2006 16:13:48 -0800
> >From: "Alan Kucheck" <akucheck@gmail.com>
> >Subject: Commander-List: If Ted Smith were Italian...
> >To: <commander-list@matronics.com>
> >
>-- Commander-List message posted by: "Alan Kucheck" &
>lt;akucheck@gmail.com
>
>I like my coffee. Ive been though a bunch of grinders over the years
>and
>finally got fed up with crap. I went searching for the last coffee
>grinder
>I would ever buy it had to be overbuilt, hunky, hard-core. I found
>what I
>wanted in an "Italian job" from Mazzer. It stands 18 tall, weighs 22 lbs,
>has a 1/3HP direct drive motor [must be a 500A/B/S/U model!] and
>comes with
>a warning: Intended for skilled personnel only. Here is a picture:
>
>http://www.corpespresso.co.nz/mazzer_mini.jpg
>
>As I was looking at it this AM, marveling at how incredibly strong and
>well-built this thing is, I said to my wife,
>
>If Ted Smith were Italian, this is the grinder he would have built for his
>espresso."
>
>So, here we go, I thought it might be fun to get some nominations for
>other
>gear that Ted Smith might have designed if history had been different.
>Do
>you have things so well-designed, so strong, so "classic and right" that,
>in
>their own arena, they have that Ted Smith quality and feel?
>
>Alan
>
>--
>
>
>================
>================
>================
>
>
CONFIDENTIALITY & PRIVILEGE NOTICE
W.J.R.Hamilton,Glenalmond Group Companies,Fighter Flights Internet
Services and Warbirds.Net. & <wjrhamilton@optusnet.com.au>.
This message is intended for and should only be used by the
addressee. It is confidential and may contain legally privileged
information.If you are not the intended recipient any use
distribution,disclosure or copying of this message is strictly
prohibited.Confidentiality and legal privilege attached to this
communication are not waived or lost by reason of the mistaken
delivery to you.If you have received this message in error, please
notify us immediately to:
Australia 61 (0)408 876 526
Dolores capitis non fero. Eos do.
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Fw: Rules Of Engagement |
--> Commander-List message posted by: W J R HAMILTON <wjrhamilton@optusnet.com.au>
Harry,
Is the new corrugated skin the Aero Commander profile, or the
"Cessna" profile, please.
Cheers,
Bill Hamilton
At 23:30 13/02/2006, you wrote:
>--> Commander-List message posted by: <avtec2@bellsouth.net>
>
>I Have complete rudder and the elevators
>Rudder $*50.00, Elevator 1000.00
>Complete vertical, we can drill off, I also have some new corrugated skin.
>Let me know what you need
>Harry 321-267-3141
>----- Original Message -----
>From: <alh1@juno.com>
>To: <commander-list@matronics.com>
>Sent: Sunday, February 12, 2006 9:08 AM
>Subject: Re: Commander-List: Fw: Rules Of Engagement
>
>
> > --> Commander-List message posted by: "alh1@juno.com" <alh1@juno.com>
> >
> > one of our commanders suffered tail damage from a hangar door during the
> > last hurricane and we need to know where to buy the stablizer skin (this
> > is not the smooth skin) to refinish it. anyone know where it might be
> > available? al hoffman
> >
> >
> > Try Juno Platinum for Free! Then, only $9.95/month!
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
>
CONFIDENTIALITY & PRIVILEGE NOTICE
W.J.R.Hamilton,Glenalmond Group Companies,Fighter Flights Internet
Services and Warbirds.Net. & <wjrhamilton@optusnet.com.au>.
This message is intended for and should only be used by the
addressee. It is confidential and may contain legally privileged
information.If you are not the intended recipient any use
distribution,disclosure or copying of this message is strictly
prohibited.Confidentiality and legal privilege attached to this
communication are not waived or lost by reason of the mistaken
delivery to you.If you have received this message in error, please
notify us immediately to:
Australia 61 (0)408 876 526
Dolores capitis non fero. Eos do.
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> Commander-List message posted by: W J R HAMILTON <wjrhamilton@optusnet.com.au>
Folks,
Try 02 9888 5797 or 0412 288 061 from inside Australia, or:
+61 2 9888 5797 or +61 412 288 061.
I spoke to Richard several weeks ago, he is spending quite a bit of
time outside the country on business.
Cheers,
Bill Hamilton
At 14:01 14/02/2006, you wrote:
>--> Commander-List message posted by: "steve" <steveg@nternet.com>
>
>Anybody have Richard Thompson's Oz phone number? My partner down under
>needs to call him.
>
>
>Thanks,
>
>Steve G
>
>
CONFIDENTIALITY & PRIVILEGE NOTICE
W.J.R.Hamilton,Glenalmond Group Companies,Fighter Flights Internet
Services and Warbirds.Net. & <wjrhamilton@optusnet.com.au>.
This message is intended for and should only be used by the
addressee. It is confidential and may contain legally privileged
information.If you are not the intended recipient any use
distribution,disclosure or copying of this message is strictly
prohibited.Confidentiality and legal privilege attached to this
communication are not waived or lost by reason of the mistaken
delivery to you.If you have received this message in error, please
notify us immediately to:
Australia 61 (0)408 876 526
Dolores capitis non fero. Eos do.
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Oil Filter conversion |
--> Commander-List message posted by: W J R HAMILTON <wjrhamilton@optusnet.com.au>
Folks,
I have spin on's on my IO 470's, but for the life of me, I can't
remember the name. They came with an STC for fitting, they just screw
in to the same hole as the oil screen.
An alternative is a remote filter, Wolf or similar, but that us a lot
more work, because real estate dictates mounting the filter in the wheel well.
Try Googling oil filters for IO-470, and I think Spruce carry them.
Also try www.fm-enterprises.com/
Cheers,
Bill Hamilton
At 15:44 14/02/2006, you wrote:
>--> Commander-List message posted by: YOURTCFG@aol.com
>
>
>In a message dated 2/10/2006 1:06:30 P.M. Pacific Standard Time,
>dltafolk@sbcglobal.net writes:
>
>Anyone have a source for a conversion to install a spin on oil filter direct
>to a IO-470 in my 500A?
>
>
>I think that can be done from continental?? Anybody know?? It would be an
>engine mod rather than an airframe mod. jb
>
>
CONFIDENTIALITY & PRIVILEGE NOTICE
W.J.R.Hamilton,Glenalmond Group Companies,Fighter Flights Internet
Services and Warbirds.Net. & <wjrhamilton@optusnet.com.au>.
This message is intended for and should only be used by the
addressee. It is confidential and may contain legally privileged
information.If you are not the intended recipient any use
distribution,disclosure or copying of this message is strictly
prohibited.Confidentiality and legal privilege attached to this
communication are not waived or lost by reason of the mistaken
delivery to you.If you have received this message in error, please
notify us immediately to:
Australia 61 (0)408 876 526
Dolores capitis non fero. Eos do.
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> Commander-List message posted by: "steve" <steveg@nternet.com>
Bill,
Thanks for the quick help. Will get to Michael this morning.
Steve G.
-----Original Message-----
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of W J R
HAMILTON
Sent: Tuesday, February 14, 2006 2:50 AM
Subject: Re: Commander-List: Contact
--> Commander-List message posted by: W J R HAMILTON
<wjrhamilton@optusnet.com.au>
Folks,
Try 02 9888 5797 or 0412 288 061 from inside Australia, or:
+61 2 9888 5797 or +61 412 288 061.
I spoke to Richard several weeks ago, he is spending quite a bit of
time outside the country on business.
Cheers,
Bill Hamilton
At 14:01 14/02/2006, you wrote:
>--> Commander-List message posted by: "steve" <steveg@nternet.com>
>
>Anybody have Richard Thompson's Oz phone number? My partner down under
>needs to call him.
>
>
>Thanks,
>
>Steve G
>
>
CONFIDENTIALITY & PRIVILEGE NOTICE
W.J.R.Hamilton,Glenalmond Group Companies,Fighter Flights Internet
Services and Warbirds.Net. & <wjrhamilton@optusnet.com.au>.
This message is intended for and should only be used by the
addressee. It is confidential and may contain legally privileged
information.If you are not the intended recipient any use
distribution,disclosure or copying of this message is strictly
prohibited.Confidentiality and legal privilege attached to this
communication are not waived or lost by reason of the mistaken
delivery to you.If you have received this message in error, please
notify us immediately to:
Australia 61 (0)408 876 526
Dolores capitis non fero. Eos do.
Message 6
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> Commander-List message posted by: "Tom Fisher" <tfisher@commandergroup.bc.ca>
I was told that the bungees have to be replaced every six months, does
anyone know what the real deal is?
Tom F.
----- Original Message -----
From: "Moe" <moe@rosspistons.com>
Sent: Friday, February 10, 2006 06:59
Subject: Re: Commander-List: Bungees
> --> Commander-List message posted by: "Moe" <moe@rosspistons.com>
>
> Tom.
>
> My guy has been replacing them every year at annual, and the charge has
been
> very minimal. If you do not get an answer from another member today, tell
> me and I will get the name and contact information Monday morning.
>
> Regards,
>
> Moe
> ----- Original Message -----
> From: "Donnie Rose" <aquadiver99@yahoo.com>
> To: <commander-list@matronics.com>
> Sent: Friday, February 10, 2006 6:29 AM
> Subject: Re: Commander-List: Bungees
>
>
> > --> Commander-List message posted by: Donnie Rose
<aquadiver99@yahoo.com>
> >
> > Good Morning Mr. Fisher,
> > There isa a place in Mississipi that custom builds the
> > bungees. I will talk with someone today for the name.
> > Regards,
> > Donnie Rose
> >
> > --- Tom Fisher <tfisher@commandergroup.bc.ca> wrote:
> >
> > > --> Commander-List message posted by: "Tom Fisher"
> > > <tfisher@commandergroup.bc.ca>
> > >
> > > Hello all,
> > >
> > > Now that I have my Skydrol leak plugged I need to
> > > replace the bungees on that side as the Skydrol
> > > saturated the existing bungees.
> > >
> > > Right now I only need one set (2 bungees) does
> > > anyone have any or know of a source?
> > >
> > > Thanks.
> > >
> > > Tom F.
> > > C-GISS 680FLP (Mr.RPM)
> > >
> > >
> > >
> > >
> > > browse
> > > Subscriptions page,
> > > FAQ,
> > > http://www.matronics.com/Navigator?Commander-List
> > >
> > > Admin.
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
> >
> > Donnie Rose
> > 205/492-8444
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
>
Message 7
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> Commander-List message posted by: CloudCraft@aol.com
Tom,
I'm not an A&P (nor Engineer as they're called elsewhere) but every 6 months
seems a bit excessive.
Every annual should be good -- especially in a cool climate such as yours.
I do advocate pulling the bungees around a few inches every time you go out
to fly so you don't end up with "flat spots" on them.
Wing Commander Gordon
Life is not simple anywhere. Probably less so elsewhere.
Message 8
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> Commander-List message posted by: "Randy Dettmer, AIA" <rcdettmer@charter.net>
Hi Guys,
I've been following your discussions about the bungees, and thought I'd add
my 2 cents. Morris Kernick has been replacing my bungees at each annual
inspection. The cost has been around $20.00 each. I am not aware of any
requirement that they should be replaced sooner.
Randy Dettmer
680F/N6253X
Dettmer Architecture
805 541 4864 / Fax 805 541 4865
www.dettmerarchitecture.com
-----Original Message-----
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com]On Behalf Of Tom
Fisher
Sent: Tuesday, February 14, 2006 9:08 AM
Subject: Re: Commander-List: Bungees
--> Commander-List message posted by: "Tom Fisher"
<tfisher@commandergroup.bc.ca>
I was told that the bungees have to be replaced every six months, does
anyone know what the real deal is?
Tom F.
----- Original Message -----
From: "Moe" <moe@rosspistons.com>
Sent: Friday, February 10, 2006 06:59
Subject: Re: Commander-List: Bungees
> --> Commander-List message posted by: "Moe" <moe@rosspistons.com>
>
> Tom.
>
> My guy has been replacing them every year at annual, and the charge has
been
> very minimal. If you do not get an answer from another member today, tell
> me and I will get the name and contact information Monday morning.
>
> Regards,
>
> Moe
> ----- Original Message -----
> From: "Donnie Rose" <aquadiver99@yahoo.com>
> To: <commander-list@matronics.com>
> Sent: Friday, February 10, 2006 6:29 AM
> Subject: Re: Commander-List: Bungees
>
>
> > --> Commander-List message posted by: Donnie Rose
<aquadiver99@yahoo.com>
> >
> > Good Morning Mr. Fisher,
> > There isa a place in Mississipi that custom builds the
> > bungees. I will talk with someone today for the name.
> > Regards,
> > Donnie Rose
> >
> > --- Tom Fisher <tfisher@commandergroup.bc.ca> wrote:
> >
> > > --> Commander-List message posted by: "Tom Fisher"
> > > <tfisher@commandergroup.bc.ca>
> > >
> > > Hello all,
> > >
> > > Now that I have my Skydrol leak plugged I need to
> > > replace the bungees on that side as the Skydrol
> > > saturated the existing bungees.
> > >
> > > Right now I only need one set (2 bungees) does
> > > anyone have any or know of a source?
> > >
> > > Thanks.
> > >
> > > Tom F.
> > > C-GISS 680FLP (Mr.RPM)
> > >
> > >
> > >
> > >
> > > browse
> > > Subscriptions page,
> > > FAQ,
> > > http://www.matronics.com/Navigator?Commander-List
> > >
> > > Admin.
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
> >
> > Donnie Rose
> > 205/492-8444
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
>
Message 9
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> Commander-List message posted by: "Don Girod" <dongirod@bellsouth.net>
Tom;
Mechanic tell me every 24 months, and that is what he does on my 560-E. He
does a very good job of staying on top of things and he is both an A&P and
an AI.
Don
----- Original Message -----
From: "Tom Fisher" <tfisher@commandergroup.bc.ca>
Sent: Tuesday, February 14, 2006 12:07 PM
Subject: Re: Commander-List: Bungees
> --> Commander-List message posted by: "Tom Fisher"
> <tfisher@commandergroup.bc.ca>
>
> I was told that the bungees have to be replaced every six months, does
> anyone know what the real deal is?
> Tom F.
>
> ----- Original Message -----
> From: "Moe" <moe@rosspistons.com>
> To: <commander-list@matronics.com>
> Sent: Friday, February 10, 2006 06:59
> Subject: Re: Commander-List: Bungees
>
>
>> --> Commander-List message posted by: "Moe" <moe@rosspistons.com>
>>
>> Tom.
>>
>> My guy has been replacing them every year at annual, and the charge has
> been
>> very minimal. If you do not get an answer from another member today,
>> tell
>> me and I will get the name and contact information Monday morning.
>>
>> Regards,
>>
>> Moe
>> ----- Original Message -----
>> From: "Donnie Rose" <aquadiver99@yahoo.com>
>> To: <commander-list@matronics.com>
>> Sent: Friday, February 10, 2006 6:29 AM
>> Subject: Re: Commander-List: Bungees
>>
>>
>> > --> Commander-List message posted by: Donnie Rose
> <aquadiver99@yahoo.com>
>> >
>> > Good Morning Mr. Fisher,
>> > There isa a place in Mississipi that custom builds the
>> > bungees. I will talk with someone today for the name.
>> > Regards,
>> > Donnie Rose
>> >
>> > --- Tom Fisher <tfisher@commandergroup.bc.ca> wrote:
>> >
>> > > --> Commander-List message posted by: "Tom Fisher"
>> > > <tfisher@commandergroup.bc.ca>
>> > >
>> > > Hello all,
>> > >
>> > > Now that I have my Skydrol leak plugged I need to
>> > > replace the bungees on that side as the Skydrol
>> > > saturated the existing bungees.
>> > >
>> > > Right now I only need one set (2 bungees) does
>> > > anyone have any or know of a source?
>> > >
>> > > Thanks.
>> > >
>> > > Tom F.
>> > > C-GISS 680FLP (Mr.RPM)
>> > >
>> > >
>> > >
>> > >
>> > > browse
>> > > Subscriptions page,
>> > > FAQ,
>> > > http://www.matronics.com/Navigator?Commander-List
>> > >
>> > > Admin.
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> >
>> >
>> > Donnie Rose
>> > 205/492-8444
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>
>
>
Message 10
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> Commander-List message posted by: <avtec2@bellsouth.net>
On Condition!
Harry
----- Original Message -----
From: "Tom Fisher" <tfisher@commandergroup.bc.ca>
Sent: Tuesday, February 14, 2006 12:07 PM
Subject: Re: Commander-List: Bungees
> --> Commander-List message posted by: "Tom Fisher"
> <tfisher@commandergroup.bc.ca>
>
> I was told that the bungees have to be replaced every six months, does
> anyone know what the real deal is?
> Tom F.
>
> ----- Original Message -----
> From: "Moe" <moe@rosspistons.com>
> To: <commander-list@matronics.com>
> Sent: Friday, February 10, 2006 06:59
> Subject: Re: Commander-List: Bungees
>
>
>> --> Commander-List message posted by: "Moe" <moe@rosspistons.com>
>>
>> Tom.
>>
>> My guy has been replacing them every year at annual, and the charge has
> been
>> very minimal. If you do not get an answer from another member today,
>> tell
>> me and I will get the name and contact information Monday morning.
>>
>> Regards,
>>
>> Moe
>> ----- Original Message -----
>> From: "Donnie Rose" <aquadiver99@yahoo.com>
>> To: <commander-list@matronics.com>
>> Sent: Friday, February 10, 2006 6:29 AM
>> Subject: Re: Commander-List: Bungees
>>
>>
>> > --> Commander-List message posted by: Donnie Rose
> <aquadiver99@yahoo.com>
>> >
>> > Good Morning Mr. Fisher,
>> > There isa a place in Mississipi that custom builds the
>> > bungees. I will talk with someone today for the name.
>> > Regards,
>> > Donnie Rose
>> >
>> > --- Tom Fisher <tfisher@commandergroup.bc.ca> wrote:
>> >
>> > > --> Commander-List message posted by: "Tom Fisher"
>> > > <tfisher@commandergroup.bc.ca>
>> > >
>> > > Hello all,
>> > >
>> > > Now that I have my Skydrol leak plugged I need to
>> > > replace the bungees on that side as the Skydrol
>> > > saturated the existing bungees.
>> > >
>> > > Right now I only need one set (2 bungees) does
>> > > anyone have any or know of a source?
>> > >
>> > > Thanks.
>> > >
>> > > Tom F.
>> > > C-GISS 680FLP (Mr.RPM)
>> > >
>> > >
>> > >
>> > >
>> > > browse
>> > > Subscriptions page,
>> > > FAQ,
>> > > http://www.matronics.com/Navigator?Commander-List
>> > >
>> > > Admin.
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> >
>> >
>> > Donnie Rose
>> > 205/492-8444
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>
>
>
Message 11
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> Commander-List message posted by: "John Vormbaum" <john@vormbaum.com>
+1 to Randy's statement. Morris does mine at annual too.
Also, thanks Keith, you've reminded me that I've been remiss in my
pre-flight duties. I probably only spin the bungees about 2x/year, and I
should do it on every flight. I'll add that to the list.
/J
----- Original Message -----
From: "Randy Dettmer, AIA" <rcdettmer@charter.net>
Sent: Tuesday, February 14, 2006 10:26 AM
Subject: RE: Commander-List: Bungees
> --> Commander-List message posted by: "Randy Dettmer, AIA"
> <rcdettmer@charter.net>
>
> Hi Guys,
> I've been following your discussions about the bungees, and thought I'd
> add
> my 2 cents. Morris Kernick has been replacing my bungees at each annual
> inspection. The cost has been around $20.00 each. I am not aware of any
> requirement that they should be replaced sooner.
>
> Randy Dettmer
> 680F/N6253X
>
> Dettmer Architecture
> 805 541 4864 / Fax 805 541 4865
> www.dettmerarchitecture.com
>
>
> -----Original Message-----
> From: owner-commander-list-server@matronics.com
> [mailto:owner-commander-list-server@matronics.com]On Behalf Of Tom
> Fisher
> Sent: Tuesday, February 14, 2006 9:08 AM
> To: commander-list@matronics.com
> Subject: Re: Commander-List: Bungees
>
>
> --> Commander-List message posted by: "Tom Fisher"
> <tfisher@commandergroup.bc.ca>
>
> I was told that the bungees have to be replaced every six months, does
> anyone know what the real deal is?
> Tom F.
>
> ----- Original Message -----
> From: "Moe" <moe@rosspistons.com>
> To: <commander-list@matronics.com>
> Sent: Friday, February 10, 2006 06:59
> Subject: Re: Commander-List: Bungees
>
>
>> --> Commander-List message posted by: "Moe" <moe@rosspistons.com>
>>
>> Tom.
>>
>> My guy has been replacing them every year at annual, and the charge has
> been
>> very minimal. If you do not get an answer from another member today,
>> tell
>> me and I will get the name and contact information Monday morning.
>>
>> Regards,
>>
>> Moe
>> ----- Original Message -----
>> From: "Donnie Rose" <aquadiver99@yahoo.com>
>> To: <commander-list@matronics.com>
>> Sent: Friday, February 10, 2006 6:29 AM
>> Subject: Re: Commander-List: Bungees
>>
>>
>> > --> Commander-List message posted by: Donnie Rose
> <aquadiver99@yahoo.com>
>> >
>> > Good Morning Mr. Fisher,
>> > There isa a place in Mississipi that custom builds the
>> > bungees. I will talk with someone today for the name.
>> > Regards,
>> > Donnie Rose
>> >
>> > --- Tom Fisher <tfisher@commandergroup.bc.ca> wrote:
>> >
>> > > --> Commander-List message posted by: "Tom Fisher"
>> > > <tfisher@commandergroup.bc.ca>
>> > >
>> > > Hello all,
>> > >
>> > > Now that I have my Skydrol leak plugged I need to
>> > > replace the bungees on that side as the Skydrol
>> > > saturated the existing bungees.
>> > >
>> > > Right now I only need one set (2 bungees) does
>> > > anyone have any or know of a source?
>> > >
>> > > Thanks.
>> > >
>> > > Tom F.
>> > > C-GISS 680FLP (Mr.RPM)
>> > >
>> > >
>> > >
>> > >
>> > > browse
>> > > Subscriptions page,
>> > > FAQ,
>> > > http://www.matronics.com/Navigator?Commander-List
>> > >
>> > > Admin.
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> >
>> >
>> > Donnie Rose
>> > 205/492-8444
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>
>
>
Message 12
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> Commander-List message posted by: "Tom Fisher" <tfisher@commandergroup.bc.ca>
Thanks for that, an annual cycle seems more reasonable, I do currently pull
them around that is how I noticed the weakness in the Skydrol exposed ones.
Vancouver (West Coast), excuse me, is not a cool climate it is a temperate
climate where the temperature variation is small due to the proximity to the
ocean, and never sees scorching days.
Tom F.
----- Original Message -----
From: <CloudCraft@aol.com>
Sent: Tuesday, February 14, 2006 09:17
Subject: Re: Commander-List: Bungees
> --> Commander-List message posted by: CloudCraft@aol.com
>
> Tom,
> I'm not an A&P (nor Engineer as they're called elsewhere) but every 6
months
> seems a bit excessive.
>
> Every annual should be good -- especially in a cool climate such as yours.
>
> I do advocate pulling the bungees around a few inches every time you go
out
> to fly so you don't end up with "flat spots" on them.
>
> Wing Commander Gordon
>
> Life is not simple anywhere. Probably less so elsewhere.
>
>
Message 13
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> Commander-List message posted by: "Tom Fisher" <tfisher@commandergroup.bc.ca>
OK guys,
I now have;
1 vote for 6 months,
2 votes for 12 months,
1 vote for 24 months,
1 vote for "on condition",
I like "on condition"
But what is legal?
Tom F.
----- Original Message -----
From: "John Vormbaum" <john@vormbaum.com>
Sent: Tuesday, February 14, 2006 10:42
Subject: Re: Commander-List: Bungees
> --> Commander-List message posted by: "John Vormbaum" <john@vormbaum.com>
>
> +1 to Randy's statement. Morris does mine at annual too.
>
> Also, thanks Keith, you've reminded me that I've been remiss in my
> pre-flight duties. I probably only spin the bungees about 2x/year, and I
> should do it on every flight. I'll add that to the list.
>
> /J
> ----- Original Message -----
> From: "Randy Dettmer, AIA" <rcdettmer@charter.net>
> To: <commander-list@matronics.com>
> Sent: Tuesday, February 14, 2006 10:26 AM
> Subject: RE: Commander-List: Bungees
>
>
> > --> Commander-List message posted by: "Randy Dettmer, AIA"
> > <rcdettmer@charter.net>
> >
> > Hi Guys,
> > I've been following your discussions about the bungees, and thought I'd
> > add
> > my 2 cents. Morris Kernick has been replacing my bungees at each annual
> > inspection. The cost has been around $20.00 each. I am not aware of
any
> > requirement that they should be replaced sooner.
> >
> > Randy Dettmer
> > 680F/N6253X
> >
> > Dettmer Architecture
> > 805 541 4864 / Fax 805 541 4865
> > www.dettmerarchitecture.com
> >
> >
> >
> > -----Original Message-----
> > From: owner-commander-list-server@matronics.com
> > [mailto:owner-commander-list-server@matronics.com]On Behalf Of Tom
> > Fisher
> > Sent: Tuesday, February 14, 2006 9:08 AM
> > To: commander-list@matronics.com
> > Subject: Re: Commander-List: Bungees
> >
> >
> > --> Commander-List message posted by: "Tom Fisher"
> > <tfisher@commandergroup.bc.ca>
> >
> > I was told that the bungees have to be replaced every six months, does
> > anyone know what the real deal is?
> > Tom F.
> >
> > ----- Original Message -----
> > From: "Moe" <moe@rosspistons.com>
> > To: <commander-list@matronics.com>
> > Sent: Friday, February 10, 2006 06:59
> > Subject: Re: Commander-List: Bungees
> >
> >
> >> --> Commander-List message posted by: "Moe" <moe@rosspistons.com>
> >>
> >> Tom.
> >>
> >> My guy has been replacing them every year at annual, and the charge has
> > been
> >> very minimal. If you do not get an answer from another member today,
> >> tell
> >> me and I will get the name and contact information Monday morning.
> >>
> >> Regards,
> >>
> >> Moe
> >> ----- Original Message -----
> >> From: "Donnie Rose" <aquadiver99@yahoo.com>
> >> To: <commander-list@matronics.com>
> >> Sent: Friday, February 10, 2006 6:29 AM
> >> Subject: Re: Commander-List: Bungees
> >>
> >>
> >> > --> Commander-List message posted by: Donnie Rose
> > <aquadiver99@yahoo.com>
> >> >
> >> > Good Morning Mr. Fisher,
> >> > There isa a place in Mississipi that custom builds the
> >> > bungees. I will talk with someone today for the name.
> >> > Regards,
> >> > Donnie Rose
> >> >
> >> > --- Tom Fisher <tfisher@commandergroup.bc.ca> wrote:
> >> >
> >> > > --> Commander-List message posted by: "Tom Fisher"
> >> > > <tfisher@commandergroup.bc.ca>
> >> > >
> >> > > Hello all,
> >> > >
> >> > > Now that I have my Skydrol leak plugged I need to
> >> > > replace the bungees on that side as the Skydrol
> >> > > saturated the existing bungees.
> >> > >
> >> > > Right now I only need one set (2 bungees) does
> >> > > anyone have any or know of a source?
> >> > >
> >> > > Thanks.
> >> > >
> >> > > Tom F.
> >> > > C-GISS 680FLP (Mr.RPM)
> >> > >
> >> > >
> >> > >
> >> > >
> >> > > browse
> >> > > Subscriptions page,
> >> > > FAQ,
> >> > > http://www.matronics.com/Navigator?Commander-List
> >> > >
> >> > > Admin.
> >> > >
> >> > >
> >> > >
> >> > >
> >> > >
> >> > >
> >> > >
> >> > >
> >> > >
> >> > >
> >> > >
> >> >
> >> >
> >> > Donnie Rose
> >> > 205/492-8444
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
>
Message 14
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> Commander-List message posted by: CloudCraft@aol.com
In a message dated 14-Feb-06 10:48:40 Pacific Standard Time,
tfisher@commandergroup.bc.ca writes:
Vancouver (West Coast), excuse me, is not a cool climate it is a temperate
climate where the temperature variation is small due to the proximity to the
ocean, and never sees scorching days.
Come park your Commander in Las Vegas this summer and you will agree that
Vancouver is a cool climate.
And it's a cool place, besides.
Wing Commander Gordon
Life is not simple anywhere. Probably less so elsewhere.
Message 15
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> Commander-List message posted by: "Jerry Sprayberry" <capnspray_611@hotmail.com>
I think 500 Hours is the recommended time to replace the bungees. However,
that is part of the safety feature that Ted Smith designed into the
Commander, it helps that little bottle of air overlock the gear in a Hyd.
loss situation. I think I would go with the Annual replacement and
Cloudcraft's procedure of repositioning them a few inches periodically.
Jerry S.
----- Original Message -----
From: "Tom Fisher" <tfisher@commandergroup.bc.ca>
Sent: Tuesday, February 14, 2006 2:11 PM
Subject: Re: Commander-List: Bungees
> --> Commander-List message posted by: "Tom Fisher"
> <tfisher@commandergroup.bc.ca>
>
> OK guys,
> I now have;
> 1 vote for 6 months,
> 2 votes for 12 months,
> 1 vote for 24 months,
> 1 vote for "on condition",
>
> I like "on condition"
> But what is legal?
>
> Tom F.
>
>
> ----- Original Message -----
> From: "John Vormbaum" <john@vormbaum.com>
> To: <commander-list@matronics.com>
> Sent: Tuesday, February 14, 2006 10:42
> Subject: Re: Commander-List: Bungees
>
>
>> --> Commander-List message posted by: "John Vormbaum" <john@vormbaum.com>
>>
>> +1 to Randy's statement. Morris does mine at annual too.
>>
>> Also, thanks Keith, you've reminded me that I've been remiss in my
>> pre-flight duties. I probably only spin the bungees about 2x/year, and I
>> should do it on every flight. I'll add that to the list.
>>
>> /J
>> ----- Original Message -----
>> From: "Randy Dettmer, AIA" <rcdettmer@charter.net>
>> To: <commander-list@matronics.com>
>> Sent: Tuesday, February 14, 2006 10:26 AM
>> Subject: RE: Commander-List: Bungees
>>
>>
>> > --> Commander-List message posted by: "Randy Dettmer, AIA"
>> > <rcdettmer@charter.net>
>> >
>> > Hi Guys,
>> > I've been following your discussions about the bungees, and thought I'd
>> > add
>> > my 2 cents. Morris Kernick has been replacing my bungees at each
>> > annual
>> > inspection. The cost has been around $20.00 each. I am not aware of
> any
>> > requirement that they should be replaced sooner.
>> >
>> > Randy Dettmer
>> > 680F/N6253X
>> >
>> > Dettmer Architecture
>> > 805 541 4864 / Fax 805 541 4865
>> > www.dettmerarchitecture.com
>> >
>> >
>> >
>> > -----Original Message-----
>> > From: owner-commander-list-server@matronics.com
>> > [mailto:owner-commander-list-server@matronics.com]On Behalf Of Tom
>> > Fisher
>> > Sent: Tuesday, February 14, 2006 9:08 AM
>> > To: commander-list@matronics.com
>> > Subject: Re: Commander-List: Bungees
>> >
>> >
>> > --> Commander-List message posted by: "Tom Fisher"
>> > <tfisher@commandergroup.bc.ca>
>> >
>> > I was told that the bungees have to be replaced every six months, does
>> > anyone know what the real deal is?
>> > Tom F.
>> >
>> > ----- Original Message -----
>> > From: "Moe" <moe@rosspistons.com>
>> > To: <commander-list@matronics.com>
>> > Sent: Friday, February 10, 2006 06:59
>> > Subject: Re: Commander-List: Bungees
>> >
>> >
>> >> --> Commander-List message posted by: "Moe" <moe@rosspistons.com>
>> >>
>> >> Tom.
>> >>
>> >> My guy has been replacing them every year at annual, and the charge
>> >> has
>> > been
>> >> very minimal. If you do not get an answer from another member today,
>> >> tell
>> >> me and I will get the name and contact information Monday morning.
>> >>
>> >> Regards,
>> >>
>> >> Moe
>> >> ----- Original Message -----
>> >> From: "Donnie Rose" <aquadiver99@yahoo.com>
>> >> To: <commander-list@matronics.com>
>> >> Sent: Friday, February 10, 2006 6:29 AM
>> >> Subject: Re: Commander-List: Bungees
>> >>
>> >>
>> >> > --> Commander-List message posted by: Donnie Rose
>> > <aquadiver99@yahoo.com>
>> >> >
>> >> > Good Morning Mr. Fisher,
>> >> > There isa a place in Mississipi that custom builds the
>> >> > bungees. I will talk with someone today for the name.
>> >> > Regards,
>> >> > Donnie Rose
>> >> >
>> >> > --- Tom Fisher <tfisher@commandergroup.bc.ca> wrote:
>> >> >
>> >> > > --> Commander-List message posted by: "Tom Fisher"
>> >> > > <tfisher@commandergroup.bc.ca>
>> >> > >
>> >> > > Hello all,
>> >> > >
>> >> > > Now that I have my Skydrol leak plugged I need to
>> >> > > replace the bungees on that side as the Skydrol
>> >> > > saturated the existing bungees.
>> >> > >
>> >> > > Right now I only need one set (2 bungees) does
>> >> > > anyone have any or know of a source?
>> >> > >
>> >> > > Thanks.
>> >> > >
>> >> > > Tom F.
>> >> > > C-GISS 680FLP (Mr.RPM)
>> >> > >
>> >> > >
>> >> > >
>> >> > >
>> >> > > browse
>> >> > > Subscriptions page,
>> >> > > FAQ,
>> >> > > http://www.matronics.com/Navigator?Commander-List
>> >> > >
>> >> > > Admin.
>> >> > >
>> >> > >
>> >> > >
>> >> > >
>> >> > >
>> >> > >
>> >> > >
>> >> > >
>> >> > >
>> >> > >
>> >> > >
>> >> >
>> >> >
>> >> > Donnie Rose
>> >> > 205/492-8444
>> >> >
>> >> >
>> >> >
>> >> >
>> >> >
>> >> >
>> >> >
>> >> >
>> >> >
>> >> >
>> >> >
>> >> >
>> >> >
>> >> >
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>
>
>
Message 16
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> Commander-List message posted by: "Jerry Sprayberry" <capnspray_611@hotmail.com>
To all:
The following Link is the Manufacturer of the Bungees.
http://www.sbcindustries.com/
Jerry S.
----- Original Message -----
From: "Jerry Sprayberry" <capnspray_611@hotmail.com>
Sent: Tuesday, February 14, 2006 6:08 PM
Subject: Re: Commander-List: Bungees
> --> Commander-List message posted by: "Jerry Sprayberry"
> <capnspray_611@hotmail.com>
>
>
> I think 500 Hours is the recommended time to replace the bungees. However,
> that is part of the safety feature that Ted Smith designed into the
> Commander, it helps that little bottle of air overlock the gear in a Hyd.
> loss situation. I think I would go with the Annual replacement and
> Cloudcraft's procedure of repositioning them a few inches periodically.
>
> Jerry S.
> ----- Original Message -----
> From: "Tom Fisher" <tfisher@commandergroup.bc.ca>
> To: <commander-list@matronics.com>
> Sent: Tuesday, February 14, 2006 2:11 PM
> Subject: Re: Commander-List: Bungees
>
>
>> --> Commander-List message posted by: "Tom Fisher"
>> <tfisher@commandergroup.bc.ca>
>>
>> OK guys,
>> I now have;
>> 1 vote for 6 months,
>> 2 votes for 12 months,
>> 1 vote for 24 months,
>> 1 vote for "on condition",
>>
>> I like "on condition"
>> But what is legal?
>>
>> Tom F.
>>
>>
>> ----- Original Message -----
>> From: "John Vormbaum" <john@vormbaum.com>
>> To: <commander-list@matronics.com>
>> Sent: Tuesday, February 14, 2006 10:42
>> Subject: Re: Commander-List: Bungees
>>
>>
>>> --> Commander-List message posted by: "John Vormbaum"
>>> <john@vormbaum.com>
>>>
>>> +1 to Randy's statement. Morris does mine at annual too.
>>>
>>> Also, thanks Keith, you've reminded me that I've been remiss in my
>>> pre-flight duties. I probably only spin the bungees about 2x/year, and I
>>> should do it on every flight. I'll add that to the list.
>>>
>>> /J
>>> ----- Original Message -----
>>> From: "Randy Dettmer, AIA" <rcdettmer@charter.net>
>>> To: <commander-list@matronics.com>
>>> Sent: Tuesday, February 14, 2006 10:26 AM
>>> Subject: RE: Commander-List: Bungees
>>>
>>>
>>> > --> Commander-List message posted by: "Randy Dettmer, AIA"
>>> > <rcdettmer@charter.net>
>>> >
>>> > Hi Guys,
>>> > I've been following your discussions about the bungees, and thought
>>> > I'd
>>> > add
>>> > my 2 cents. Morris Kernick has been replacing my bungees at each
>>> > annual
>>> > inspection. The cost has been around $20.00 each. I am not aware of
>> any
>>> > requirement that they should be replaced sooner.
>>> >
>>> > Randy Dettmer
>>> > 680F/N6253X
>>> >
>>> > Dettmer Architecture
>>> > 805 541 4864 / Fax 805 541 4865
>>> > www.dettmerarchitecture.com
>>> >
>>> >
>>> >
>>> > -----Original Message-----
>>> > From: owner-commander-list-server@matronics.com
>>> > [mailto:owner-commander-list-server@matronics.com]On Behalf Of Tom
>>> > Fisher
>>> > Sent: Tuesday, February 14, 2006 9:08 AM
>>> > To: commander-list@matronics.com
>>> > Subject: Re: Commander-List: Bungees
>>> >
>>> >
>>> > --> Commander-List message posted by: "Tom Fisher"
>>> > <tfisher@commandergroup.bc.ca>
>>> >
>>> > I was told that the bungees have to be replaced every six months, does
>>> > anyone know what the real deal is?
>>> > Tom F.
>>> >
>>> > ----- Original Message -----
>>> > From: "Moe" <moe@rosspistons.com>
>>> > To: <commander-list@matronics.com>
>>> > Sent: Friday, February 10, 2006 06:59
>>> > Subject: Re: Commander-List: Bungees
>>> >
>>> >
>>> >> --> Commander-List message posted by: "Moe" <moe@rosspistons.com>
>>> >>
>>> >> Tom.
>>> >>
>>> >> My guy has been replacing them every year at annual, and the charge
>>> >> has
>>> > been
>>> >> very minimal. If you do not get an answer from another member today,
>>> >> tell
>>> >> me and I will get the name and contact information Monday morning.
>>> >>
>>> >> Regards,
>>> >>
>>> >> Moe
>>> >> ----- Original Message -----
>>> >> From: "Donnie Rose" <aquadiver99@yahoo.com>
>>> >> To: <commander-list@matronics.com>
>>> >> Sent: Friday, February 10, 2006 6:29 AM
>>> >> Subject: Re: Commander-List: Bungees
>>> >>
>>> >>
>>> >> > --> Commander-List message posted by: Donnie Rose
>>> > <aquadiver99@yahoo.com>
>>> >> >
>>> >> > Good Morning Mr. Fisher,
>>> >> > There isa a place in Mississipi that custom builds the
>>> >> > bungees. I will talk with someone today for the name.
>>> >> > Regards,
>>> >> > Donnie Rose
>>> >> >
>>> >> > --- Tom Fisher <tfisher@commandergroup.bc.ca> wrote:
>>> >> >
>>> >> > > --> Commander-List message posted by: "Tom Fisher"
>>> >> > > <tfisher@commandergroup.bc.ca>
>>> >> > >
>>> >> > > Hello all,
>>> >> > >
>>> >> > > Now that I have my Skydrol leak plugged I need to
>>> >> > > replace the bungees on that side as the Skydrol
>>> >> > > saturated the existing bungees.
>>> >> > >
>>> >> > > Right now I only need one set (2 bungees) does
>>> >> > > anyone have any or know of a source?
>>> >> > >
>>> >> > > Thanks.
>>> >> > >
>>> >> > > Tom F.
>>> >> > > C-GISS 680FLP (Mr.RPM)
>>> >> > >
>>> >> > >
>>> >> > >
>>> >> > >
>>> >> > > browse
>>> >> > > Subscriptions page,
>>> >> > > FAQ,
>>> >> > > http://www.matronics.com/Navigator?Commander-List
>>> >> > >
>>> >> > > Admin.
>>> >> > >
>>> >> > >
>>> >> > >
>>> >> > >
>>> >> > >
>>> >> > >
>>> >> > >
>>> >> > >
>>> >> > >
>>> >> > >
>>> >> > >
>>> >> >
>>> >> >
>>> >> > Donnie Rose
>>> >> > 205/492-8444
>>> >> >
>>> >> >
>>> >> >
>>> >> >
>>> >> >
>>> >> >
>>> >> >
>>> >> >
>>> >> >
>>> >> >
>>> >> >
>>> >> >
>>> >> >
>>> >> >
>>> >>
>>> >>
>>> >>
>>> >>
>>> >>
>>> >>
>>> >>
>>> >>
>>> >>
>>> >>
>>> >>
>>> >>
>>> >>
>>> >>
>>> >>
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>
>
>
Message 17
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: If Ted Smith were Italian... |
--> Commander-List message posted by: YOURTCFG@aol.com
In a message dated 2/13/2006 9:35:26 PM Pacific Standard Time,
tylor.hall@sbcglobal.net writes:
Is this 680 the one up in Puyallup, WA?
No, this one s in outhern WA and is hangared. jb
Message 18
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> Commander-List message posted by: "Alan Kucheck" <akucheck@gmail.com>
My shop manual says:
"Bungees must be maintained in good condition and replaced every six months.
Rings that have frayed housings or have been in contact with rubber
deteriorating solvents or oils must be replaced."
That said, at six months here in Southern California their condition has
justified replacement; we always do it at annual.
ak
-----Original Message-----
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of Tom Fisher
Sent: Tuesday, February 14, 2006 9:08 AM
Subject: Re: Commander-List: Bungees
--> Commander-List message posted by: "Tom Fisher"
<tfisher@commandergroup.bc.ca>
I was told that the bungees have to be replaced every six months, does
anyone know what the real deal is?
Tom F.
----- Original Message -----
From: "Moe" <moe@rosspistons.com>
Sent: Friday, February 10, 2006 06:59
Subject: Re: Commander-List: Bungees
> --> Commander-List message posted by: "Moe" <moe@rosspistons.com>
>
> Tom.
>
> My guy has been replacing them every year at annual, and the charge has
been
> very minimal. If you do not get an answer from another member today, tell
> me and I will get the name and contact information Monday morning.
>
> Regards,
>
> Moe
> ----- Original Message -----
> From: "Donnie Rose" <aquadiver99@yahoo.com>
> To: <commander-list@matronics.com>
> Sent: Friday, February 10, 2006 6:29 AM
> Subject: Re: Commander-List: Bungees
>
>
> > --> Commander-List message posted by: Donnie Rose
<aquadiver99@yahoo.com>
> >
> > Good Morning Mr. Fisher,
> > There isa a place in Mississipi that custom builds the
> > bungees. I will talk with someone today for the name.
> > Regards,
> > Donnie Rose
> >
> > --- Tom Fisher <tfisher@commandergroup.bc.ca> wrote:
> >
> > > --> Commander-List message posted by: "Tom Fisher"
> > > <tfisher@commandergroup.bc.ca>
> > >
> > > Hello all,
> > >
> > > Now that I have my Skydrol leak plugged I need to
> > > replace the bungees on that side as the Skydrol
> > > saturated the existing bungees.
> > >
> > > Right now I only need one set (2 bungees) does
> > > anyone have any or know of a source?
> > >
> > > Thanks.
> > >
> > > Tom F.
> > > C-GISS 680FLP (Mr.RPM)
> > >
> > >
> > >
> > >
> > > browse
> > > Subscriptions page,
> > > FAQ,
> > > http://www.matronics.com/Navigator?Commander-List
> > >
> > > Admin.
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
> >
> > Donnie Rose
> > 205/492-8444
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
>
--
--
Message 19
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> Commander-List message posted by: Craig Lundborg <dltafolk@sbcglobal.net>
6 months to a year,
I look at where they live...then act accordingly! And I just bought my 500A but ordered new bungees to be ready...from www.sacskyranch.com
Craig 1260B
Alan Kucheck <akucheck@gmail.com> wrote:
--> Commander-List message posted by: "Alan Kucheck"
My shop manual says:
"Bungees must be maintained in good condition and replaced every six months.
Rings that have frayed housings or have been in contact with rubber
deteriorating solvents or oils must be replaced."
That said, at six months here in Southern California their condition has
justified replacement; we always do it at annual.
ak
-----Original Message-----
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of Tom Fisher
Sent: Tuesday, February 14, 2006 9:08 AM
Subject: Re: Commander-List: Bungees
--> Commander-List message posted by: "Tom Fisher"
I was told that the bungees have to be replaced every six months, does
anyone know what the real deal is?
Tom F.
----- Original Message -----
From: "Moe"
Sent: Friday, February 10, 2006 06:59
Subject: Re: Commander-List: Bungees
> --> Commander-List message posted by: "Moe"
>
> Tom.
>
> My guy has been replacing them every year at annual, and the charge has
been
> very minimal. If you do not get an answer from another member today, tell
> me and I will get the name and contact information Monday morning.
>
> Regards,
>
> Moe
> ----- Original Message -----
> From: "Donnie Rose"
> To:
> Sent: Friday, February 10, 2006 6:29 AM
> Subject: Re: Commander-List: Bungees
>
>
> > --> Commander-List message posted by: Donnie Rose
> >
> > Good Morning Mr. Fisher,
> > There isa a place in Mississipi that custom builds the
> > bungees. I will talk with someone today for the name.
> > Regards,
> > Donnie Rose
> >
> > --- Tom Fisher wrote:
> >
> > > --> Commander-List message posted by: "Tom Fisher"
> > >
> > >
> > > Hello all,
> > >
> > > Now that I have my Skydrol leak plugged I need to
> > > replace the bungees on that side as the Skydrol
> > > saturated the existing bungees.
> > >
> > > Right now I only need one set (2 bungees) does
> > > anyone have any or know of a source?
> > >
> > > Thanks.
> > >
> > > Tom F.
> > > C-GISS 680FLP (Mr.RPM)
> > >
> > >
> > >
> > >
> > > browse
> > > Subscriptions page,
> > > FAQ,
> > > http://www.matronics.com/Navigator?Commander-List
> > >
> > > Admin.
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
> >
> > Donnie Rose
> > 205/492-8444
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
>
--
--
Message 20
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> Commander-List message posted by: "Tom Fisher" <tfisher@commandergroup.bc.ca>
There you have it "6 months" as per the shop manual.
That is what the insurance company would look at when the wheel doesn't
rotate for landing.
I am sort of amazed that we were all over the map with reference to
mandatory time interval of service.
Tom F.
----- Original Message -----
From: "Alan Kucheck" <akucheck@gmail.com>
Sent: Tuesday, February 14, 2006 20:42
Subject: RE: Commander-List: Bungees
> --> Commander-List message posted by: "Alan Kucheck" <akucheck@gmail.com>
>
> My shop manual says:
>
> "Bungees must be maintained in good condition and replaced every six
months.
> Rings that have frayed housings or have been in contact with rubber
> deteriorating solvents or oils must be replaced."
>
> That said, at six months here in Southern California their condition has
> justified replacement; we always do it at annual.
>
> ak
>
> -----Original Message-----
> From: owner-commander-list-server@matronics.com
> [mailto:owner-commander-list-server@matronics.com] On Behalf Of Tom Fisher
> Sent: Tuesday, February 14, 2006 9:08 AM
> To: commander-list@matronics.com
> Subject: Re: Commander-List: Bungees
>
> --> Commander-List message posted by: "Tom Fisher"
> <tfisher@commandergroup.bc.ca>
>
> I was told that the bungees have to be replaced every six months, does
> anyone know what the real deal is?
> Tom F.
>
> ----- Original Message -----
> From: "Moe" <moe@rosspistons.com>
> To: <commander-list@matronics.com>
> Sent: Friday, February 10, 2006 06:59
> Subject: Re: Commander-List: Bungees
>
>
> > --> Commander-List message posted by: "Moe" <moe@rosspistons.com>
> >
> > Tom.
> >
> > My guy has been replacing them every year at annual, and the charge has
> been
> > very minimal. If you do not get an answer from another member today,
tell
> > me and I will get the name and contact information Monday morning.
> >
> > Regards,
> >
> > Moe
> > ----- Original Message -----
> > From: "Donnie Rose" <aquadiver99@yahoo.com>
> > To: <commander-list@matronics.com>
> > Sent: Friday, February 10, 2006 6:29 AM
> > Subject: Re: Commander-List: Bungees
> >
> >
> > > --> Commander-List message posted by: Donnie Rose
> <aquadiver99@yahoo.com>
> > >
> > > Good Morning Mr. Fisher,
> > > There isa a place in Mississipi that custom builds the
> > > bungees. I will talk with someone today for the name.
> > > Regards,
> > > Donnie Rose
> > >
> > > --- Tom Fisher <tfisher@commandergroup.bc.ca> wrote:
> > >
> > > > --> Commander-List message posted by: "Tom Fisher"
> > > > <tfisher@commandergroup.bc.ca>
> > > >
> > > > Hello all,
> > > >
> > > > Now that I have my Skydrol leak plugged I need to
> > > > replace the bungees on that side as the Skydrol
> > > > saturated the existing bungees.
> > > >
> > > > Right now I only need one set (2 bungees) does
> > > > anyone have any or know of a source?
> > > >
> > > > Thanks.
> > > >
> > > > Tom F.
> > > > C-GISS 680FLP (Mr.RPM)
> > > >
> > > >
> > > >
> > > >
> > > > browse
> > > > Subscriptions page,
> > > > FAQ,
> > > > http://www.matronics.com/Navigator?Commander-List
> > > >
> > > > Admin.
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> > > Donnie Rose
> > > 205/492-8444
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
>
> --
>
>
> --
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|