Today's Message Index:
----------------------
1. 10:09 PM - Re: Bungees (BillLeff1@aol.com)
2. 10:32 PM - Re: Bungees (BillLeff1@aol.com)
3. 11:00 PM - Re: Bungees (Alan Kucheck)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> Commander-List message posted by: BillLeff1@aol.com
There is no requirement! On Condition is correct but, 24 mo should be max.
It will be different depending on the climate or if the aircraft is kept in a
hangar or tied outside. Do they regularly get oil or hydraulic fluid on them?
Bottom Line: If they don't look good, replace them!!!
It is cheap insurance
Bill Leff
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> Commander-List message posted by: BillLeff1@aol.com
Which shop manual says that? It would be a great reference.
In the most recent 150 hour program for the 690 series it says "Down Lock
Bungee- Inspect for fraying and deterioration. Squeeze the bungee with thumb
and forefinger, if contact can be made, replace bungee." No calendar time is
specified.
That is the most recent revision dated August 9,2002.
Bill Leff
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> Commander-List message posted by: "Alan Kucheck" <akucheck@gmail.com>
The manual I quoted from is my 500A Maintenance manual. Dates are:
Reissued: April 2, 1962
Changed: November 7, 1980
Alan
-----Original Message-----
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of
BillLeff1@aol.com
Sent: Thursday, February 16, 2006 10:32 PM
Subject: Re: Commander-List: Bungees
--> Commander-List message posted by: BillLeff1@aol.com
Which shop manual says that? It would be a great reference.
In the most recent 150 hour program for the 690 series it says "Down Lock
Bungee- Inspect for fraying and deterioration. Squeeze the bungee with
thumb
and forefinger, if contact can be made, replace bungee." No calendar time
is
specified.
That is the most recent revision dated August 9,2002.
Bill Leff
--
--
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|