Commander-List Digest Archive

Tue 04/04/06


Total Messages Posted: 6



Today's Message Index:
----------------------
 
     1. 05:24 PM - nose gear shimmy (Dan Farmer)
     2. 06:32 PM - Re: nose gear shimmy (Tom Fisher)
     3. 06:38 PM - Re: nose gear shimmy (William Boelte)
     4. 09:12 PM - Re: nose gear shimmy (YOURTCFG@aol.com)
     5. 10:14 PM - New Articles uploaded (css nico)
     6. 10:14 PM - Re: MR RPM Turbos (css nico)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:24:33 PM PST US
    From: Dan Farmer <daniellfarmer@yahoo.com>
    Subject: nose gear shimmy
    --> Commander-List message posted by: Dan Farmer <daniellfarmer@yahoo.com> My 500B has started to pickup a shimmy on take off starting at about 70mph. It is better if I use alot of back presure early relieving some weight off the nose. It seems to go away as the speed picks up. It is coming from the nose gear. Any ideas on the fix? dan farmer ---------------------------------


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:32:53 PM PST US
    From: "Tom Fisher" <tfisher@commandergroup.bc.ca>
    Subject: Re: nose gear shimmy
    --> Commander-List message posted by: "Tom Fisher" <tfisher@commandergroup.bc.ca> Anti-shimmy pads, adjust the screws that tighten the spring pressure. Tom F. Former 500B owner NOW 680FLP (Mr.RPM). ----- Original Message ----- From: "Dan Farmer" <daniellfarmer@yahoo.com> Sent: Tuesday, April 04, 2006 17:22 Subject: Commander-List: nose gear shimmy > --> Commander-List message posted by: Dan Farmer <daniellfarmer@yahoo.com> > > My 500B has started to pickup a shimmy on take off starting at about 70mph. It is better if I use alot of back presure early relieving some weight off the nose. It seems to go away as the speed picks up. It is coming from the nose gear. Any ideas on the fix? > > dan farmer > > > --------------------------------- > >


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:38:49 PM PST US
    From: "William Boelte" <n55bz@cox.net>
    Subject: nose gear shimmy
    --> Commander-List message posted by: "William Boelte" <n55bz@cox.net> Mine did that. I just had the mechanic tighten up the friction assembly on the nose strut and it went away. It doesn't take much to make the shimmy go away. Too tight and the nose wheel steering is sluggish. Kindest regards, Bill -----Original Message----- From: owner-commander-list-server@matronics.com [mailto:owner-commander-list-server@matronics.com] On Behalf Of Dan Farmer Sent: Tuesday, April 04, 2006 7:22 PM Subject: Commander-List: nose gear shimmy --> Commander-List message posted by: Dan Farmer <daniellfarmer@yahoo.com> My 500B has started to pickup a shimmy on take off starting at about 70mph. It is better if I use alot of back presure early relieving some weight off the nose. It seems to go away as the speed picks up. It is coming from the nose gear. Any ideas on the fix? dan farmer ---------------------------------


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 09:12:41 PM PST US
    From: YOURTCFG@aol.com
    Subject: Re: nose gear shimmy
    --> Commander-List message posted by: YOURTCFG@aol.com In a message dated 4/4/2006 5:25:23 P.M. Pacific Standard Time, daniellfarmer@yahoo.com writes: Any ideas on the fix? Buy a can of disc brake cleaner. Spray liberally into the friction area. Watch as the goo runs out. Works almost every time.. jb


    Message 5


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 10:14:08 PM PST US
    From: "css nico" <nico@cybersuperstore.com>
    Subject: New Articles uploaded
    --> Commander-List message posted by: "css nico" <nico@cybersuperstore.com> Folks, The new stuff Bert sent has been uploaded to http://www.teletuition.org/articles.htm and click on Articles and then on 04-04-2006. Enjoy, Nico


    Message 6


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 10:14:08 PM PST US
    From: "css nico" <nico@cybersuperstore.com>
    Subject: Re: MR RPM Turbos
    --> Commander-List message posted by: "css nico" <nico@cybersuperstore.com> Folks, The new panel photos of Tom's Mr. RPM hvae been uploaded to http://www.teletuition.org/panels.htm and click on Panels and then 04-04-2006. Enjoy, Nico




    Other Matronics Email List Services

  • Post A New Message
  •   commander-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/Commander-List.htm
  • Full Archive Search Engine
  •   http://www.matronics.com/search
  • 7-Day List Browse
  •   http://www.matronics.com/browse/commander-list
  • Browse Commander-List Digests
  •   http://www.matronics.com/digest/commander-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contributions

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --