---------------------------------------------------------- Commander-List Digest Archive --- Total Messages Posted Fri 07/14/06: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:04 AM - Re: FLY-IN DATES TO REMAIN UNCHANGED (SEPT 21-23) (Chris Schuermann) 2. 12:45 PM - Re: Mixture Control 560E (Bill Kirkwood) 3. 03:03 PM - Re: Mixture Control 560E () 4. 04:49 PM - Re: Mixture Control 560E (Chris Schuermann) 5. 06:29 PM - Re: Mixture Control 560E (nico css) ________________________________ Message 1 _____________________________________ Time: 07:04:20 AM PST US From: Chris Schuermann Subject: Re: Commander-List: FLY-IN DATES TO REMAIN UNCHANGED (SEPT 21-23) --> Commander-List message posted by: Chris Schuermann John Vormbaum wrote: > Um, reminder, Mr. Schuermann, attendance is MANDATORY for you! Oh my! Guess I'd better get my tail in gear then! DO NOT ARCHIVE ________________________________ Message 2 _____________________________________ Time: 12:45:57 PM PST US From: "Bill Kirkwood" Subject: Re: Commander-List: Mixture Control 560E I just misunderstood. I thought that they would be rebuilt. My mistake. So, when I saw them and they were frozen and the ends were corroded; I was disappointed. After soaking them and loosening them up and inspecting the cables inside, I have decided to keep one of them. I am sending you a check for $115.00 and a box with one of your cables and one of mine. Thanks. ----- Original Message ----- From: avtec2@bellsouth.net To: commander-list@matronics.com Sent: Wednesday, July 12, 2006 5:15 AM Subject: Re: Commander-List: Mixture Control 560E Sorry you dont like the cables. Please ship back an i will send you a Money Order for the freight charges. Thanks Harry Avtec II, Inc 480 N williams Ave. Titusville, FL. 32796 321 267-3141 ----- Original Message ----- From: Bill Kirkwood To: commander-list@matronics.com Sent: Thursday, June 29, 2006 8:59 PM Subject: Commander-List: Mixture Control 560E I am looking for a replacement push-pull cable for the mixture control on my 1959 560E. This is a push-pull cable in an 'S' shaped tube that spans the 2 foot distance from the firewall to the carburetor. 1. Does anyone know where I could find one? Or two? (the other side is probably just as bad) 2. Does anyone know who could replace the cable in this one? (I sent it to Aircraft Spruce and they sent it back.) 3. Does anyone know what happened to "Commander Doc"? The number I have for them is no longer a working number. Thanks for any help you can give me. ________________________________ Message 3 _____________________________________ Time: 03:03:10 PM PST US From: Subject: Re: Commander-List: Mixture Control 560E OK I have some other to look at. If you want me to please send the old cables to. I will do either sat or mon thanks Harry ----- Original Message ----- From: Bill Kirkwood To: commander-list@matronics.com Sent: Friday, July 14, 2006 3:44 PM Subject: Re: Commander-List: Mixture Control 560E I just misunderstood. I thought that they would be rebuilt. My mistake. So, when I saw them and they were frozen and the ends were corroded; I was disappointed. After soaking them and loosening them up and inspecting the cables inside, I have decided to keep one of them. I am sending you a check for $115.00 and a box with one of your cables and one of mine. Thanks. ----- Original Message ----- From: avtec2@bellsouth.net To: commander-list@matronics.com Sent: Wednesday, July 12, 2006 5:15 AM Subject: Re: Commander-List: Mixture Control 560E Sorry you dont like the cables. Please ship back an i will send you a Money Order for the freight charges. Thanks Harry Avtec II, Inc 480 N williams Ave. Titusville, FL. 32796 321 267-3141 ----- Original Message ----- From: Bill Kirkwood To: commander-list@matronics.com Sent: Thursday, June 29, 2006 8:59 PM Subject: Commander-List: Mixture Control 560E I am looking for a replacement push-pull cable for the mixture control on my 1959 560E. This is a push-pull cable in an 'S' shaped tube that spans the 2 foot distance from the firewall to the carburetor. 1. Does anyone know where I could find one? Or two? (the other side is probably just as bad) 2. Does anyone know who could replace the cable in this one? (I sent it to Aircraft Spruce and they sent it back.) 3. Does anyone know what happened to "Commander Doc"? The number I have for them is no longer a working number. Thanks for any help you can give me. ________________________________ Message 4 _____________________________________ Time: 04:49:12 PM PST US From: Chris Schuermann Subject: Re: Commander-List: Mixture Control 560E --> Commander-List message posted by: Chris Schuermann you guys actually could email each other directly rather than send this to the entire world and store it in the eternal archives you know...... (not that I'm doing any better by responding to it) chris do not archive avtec2@bellsouth.net wrote: > OK I have some other to look at. > If you want me to > please send the old cables to. > I will do either sat or mon > thanks > Harry > > ----- Original Message ----- > From: Bill Kirkwood > To: commander-list@matronics.com > Sent: Friday, July 14, 2006 3:44 PM > Subject: Re: Commander-List: Mixture Control 560E > > I just misunderstood. I thought that they would be rebuilt. My > mistake. So, when I saw them and they were frozen and the ends were > corroded; I was disappointed. > After soaking them and loosening them up and inspecting the cables > inside, I have decided to keep one of them. I am sending you a > check for $115.00 and a box with one of your cables and one of mine. > Thanks. > > ----- Original Message ----- > From: avtec2@bellsouth.net > To: commander-list@matronics.com > > Sent: Wednesday, July 12, 2006 5:15 AM > Subject: Re: Commander-List: Mixture Control 560E > > Sorry you dont like the cables. > Please ship back an i will send you a Money Order for the > freight charges. Thanks Harry > Avtec II, Inc > 480 N williams Ave. > Titusville, FL. 32796 > 321 267-3141 > > ----- Original Message ----- > From: Bill Kirkwood > To: commander-list@matronics.com > > Sent: Thursday, June 29, 2006 8:59 PM > Subject: Commander-List: Mixture Control 560E > > I am looking for a replacement push-pull cable for the > mixture control on my 1959 560E. This is a push-pull cable > in an 'S' shaped tube that spans the 2 foot distance from > the firewall to the carburetor. > > 1. Does anyone know where I could find one? Or two? (the > other side is probably just as bad) > 2. Does anyone know who could replace the cable in this > one? (I sent it to Aircraft Spruce and they sent it back.) > 3. Does anyone know what happened to "Commander Doc"? The > number I have for them is no longer a working number. > > Thanks for any help you can give me. ________________________________ Message 5 _____________________________________ Time: 06:29:38 PM PST US From: "nico css" Subject: RE: Commander-List: Mixture Control 560E --> Commander-List message posted by: "nico css" I kinda enjoyed seeing honesty and integrity at work. (Send back that which you don't like, I'll refund your money and shipping. That's a lesson.) -----Original Message----- [mailto:owner-commander-list-server@matronics.com] On Behalf Of Chris Schuermann Sent: Friday, July 14, 2006 4:48 PM --> Commander-List message posted by: Chris Schuermann you guys actually could email each other directly rather than send this to the entire world and store it in the eternal archives you know...... (not that I'm doing any better by responding to it) chris do not archive avtec2@bellsouth.net wrote: > OK I have some other to look at. > If you want me to > please send the old cables to. > I will do either sat or mon > thanks > Harry > > ----- Original Message ----- > From: Bill Kirkwood > To: commander-list@matronics.com > Sent: Friday, July 14, 2006 3:44 PM > Subject: Re: Commander-List: Mixture Control 560E > > I just misunderstood. I thought that they would be rebuilt. My > mistake. So, when I saw them and they were frozen and the ends were > corroded; I was disappointed. > After soaking them and loosening them up and inspecting the cables > inside, I have decided to keep one of them. I am sending you a > check for $115.00 and a box with one of your cables and one of mine. > Thanks. > > ----- Original Message ----- > From: avtec2@bellsouth.net > To: commander-list@matronics.com > > Sent: Wednesday, July 12, 2006 5:15 AM > Subject: Re: Commander-List: Mixture Control 560E > > Sorry you dont like the cables. > Please ship back an i will send you a Money Order for the > freight charges. Thanks Harry > Avtec II, Inc > 480 N williams Ave. > Titusville, FL. 32796 > 321 267-3141 > > ----- Original Message ----- > From: Bill Kirkwood > To: commander-list@matronics.com > > Sent: Thursday, June 29, 2006 8:59 PM > Subject: Commander-List: Mixture Control 560E > > I am looking for a replacement push-pull cable for the > mixture control on my 1959 560E. This is a push-pull cable > in an 'S' shaped tube that spans the 2 foot distance from > the firewall to the carburetor. > > 1. Does anyone know where I could find one? Or two? (the > other side is probably just as bad) > 2. Does anyone know who could replace the cable in this > one? (I sent it to Aircraft Spruce and they sent it back.) > 3. Does anyone know what happened to "Commander Doc"? The > number I have for them is no longer a working number. > > Thanks for any help you can give me.