---------------------------------------------------------- Commander-List Digest Archive --- Total Messages Posted Thu 07/27/06: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:03 AM - Re: Commander pics and stuff (steve2) 2. 06:23 AM - Re: Autopilots: Some news... (Donnie Rose) 3. 06:25 AM - Re: Gust Lock (Donnie Rose) 4. 06:26 AM - Re: Commander pics and stuff (Chris Schuermann) 5. 06:36 AM - Oskosh ATC (steve) 6. 08:35 PM - Re: Part numbers (Tom Fisher) ________________________________ Message 1 _____________________________________ Time: 06:03:26 AM PST US From: "steve2" Subject: Re: Commander-List: Commander pics and stuff --> Commander-List message posted by: "steve2" What a beautiful job you've made of 'Pugly'. Old round airplanes look best with old style paint schemes. That airplane looks like a nice place to spend some time. Steve ----- Original Message ----- Sent: Wednesday, July 26, 2006 8:25 PM > --> Commander-List message posted by: Chris Schuermann > > > > John Vormbaum wrote: >> Perhaps it still exists somewhere and >> he'll chime in. > > You're too kind with your description John. I never did really get to > finish that project sadly. I'm tickled that she's in good hands and > that Bruce is both flying and improving along the way! I dredged > through the web site, and some of the pics are still available at: > http://www.aerocommander.com/Myresto/index.html > > I HAVE, however, been able to finish my current steed. Isn't a > commander, but she's sure a sweetie: > http://members.cox.net/cschuerm/ > > > cheers > Chris > > > > > > > > > > > > ________________________________ Message 2 _____________________________________ Time: 06:23:02 AM PST US From: Donnie Rose Subject: Re: Commander-List: Autopilots: Some news... --> Commander-List message posted by: Donnie Rose What STC's are listed for the 500B? --- BillLeff1@aol.com wrote: > 520 is not listed on any of the Century auto pilot > STC's. The only models > listed are flat nacelle aircraft. > > Bill Leff > Donnie Rose 205/492-8444 __________________________________________________ ________________________________ Message 3 _____________________________________ Time: 06:25:29 AM PST US From: Donnie Rose Subject: Re: Commander-List: Gust Lock --> Commander-List message posted by: Donnie Rose Thank you Bill, Oshkosh was great and She did well! --- BillLeff1@aol.com wrote: > Put a Laundry Line Clothes Pin on toyr throttle. > When you line up on the > runway always check your "Controls Free and Compass > agrees with runway > heading" as yor last check. > > Bill Leff > Donnie Rose 205/492-8444 __________________________________________________ ________________________________ Message 4 _____________________________________ Time: 06:26:59 AM PST US From: Chris Schuermann Subject: Re: Commander-List: Commander pics and stuff --> Commander-List message posted by: Chris Schuermann steve2 wrote: > What a beautiful job you've made of 'Pugly'. Thanks Steve! I spent months debating over different paint schemes before coming up with that one. It's a difficult airplane to put an attactive paint job on for sure. I've really enjoyed this airplane a lot more than I thought I would. It's just a wonderful airplane to fly. Big, roomy, stable, and very docile. cheers, Chris ________________________________ Message 5 _____________________________________ Time: 06:36:54 AM PST US From: "steve" Subject: Commander-List: Oskosh ATC If some of you have forgotten you can go to http://www.liveatc.net/feedindex.php and listen to Oskosh. It becomes a real hoot to listen to some of the best controllers control non-stop dozens of aircraft at the same time. Steve G ________________________________ Message 6 _____________________________________ Time: 08:35:36 PM PST US From: "Tom Fisher" Subject: Re: Commander-List: Part numbers I now need the big oil cooler and my parts book is at the hanger so if anyone knows of a source please advise. Time is of the essence as I am trying to make the Abbotsford airshow August 11. Once again thanks. Tom F. C-GISS 680FLP (Mr.RPM) ----- Original Message ----- From: BillLeff1@aol.com To: commander-list@matronics.com Sent: Tuesday, July 25, 2006 11:07 AM Subject: Re: Commander-List: Part numbers I'll check the springs I have and see how much corrosion, if any, they have. Bill