Today's Message Index:
----------------------
1. 05:50 AM - Re: O2 (Moe - Ross Racing Pistons)
2. 08:49 AM - Cory Liddle NTSB Preliminary Report (Bob Steele)
3. 08:58 AM - STELLA MARIS RESORT (BertBerry1@aol.com)
4. 10:16 AM - Re: STELLA MARIS RESORT (YOURTCFG@aol.com)
5. 10:49 AM - Re: STELLA MARIS RESORT (Barry Collman)
6. 11:00 AM - Re: STELLA MARIS RESORT (MASON Chevaillier)
7. 11:38 AM - Re: STELLA MARIS RESORT (BertBerry1@aol.com)
8. 02:09 PM - Re: STELLA MARIS RESORT (Barry Collman)
9. 02:40 PM - Please help! (Barry Collman)
10. 05:37 PM - Idaho (steve)
11. 05:43 PM - Re: Idaho (Bill Bow)
12. 06:06 PM - Re: Idaho (Jim Addington)
13. 06:57 PM - Re: Please help! (Matt Dralle)
14. 07:50 PM - Re: Please help! (skyhawkc-172@comcast.net)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Hi Donnie,
Apparently these fittings are the same on most oxygen systems. When I
needed them I ordered a set of the "nose tube" type and they fit just great.
Moe
N680RR
680F(p)
-----Original Message-----
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of Donnie Rose
Sent: Monday, November 06, 2006 4:38 PM
Subject: Commander-List: O2
Good Evening everyone,
I am in need of the male quick connects for an O2 mask that plug into the
Scott "President" or model 8800 Oxygen console. These consoles were factory
installed in 500 series commanders and maybe others.
If anyone has these little fittings I would appreciate it. Most folks have
removed there O2 but I haven't.
Thanks to everyone in advance,
Donnie Rose
205/492-8444
500B, N69PT
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Cory Liddle NTSB Preliminary Report |
http://ntsb.gov/Pressrel/2006/061103.htm
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | STELLA MARIS RESORT |
Does anyone have any idea which Commander this is?
http://www.stellamarisresortairservice.com/
Thanks,
Bert
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: STELLA MARIS RESORT |
In a message dated 11/7/2006 9:03:54 A.M. Pacific Standard Time,
BertBerry1@aol.com writes:
Does anyone have any idea which Commander this is?
I have seen the airplane and met the pilot. I spent the night in Stella
Maris when delivering Jimmy Rodriguez 500B to San Juan. It has A/C, but was
inoperative that day. jb
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: STELLA MARIS RESORT |
Hi JimBob,
Was it N175AC? Does that registration ring a bell?
Very Best Regards,
Barry
----- Original Message -----
From: YOURTCFG@aol.com
To: commander-list@matronics.com
Sent: Tuesday, November 07, 2006 6:16 PM
Subject: Re: Commander-List: STELLA MARIS RESORT
In a message dated 11/7/2006 9:03:54 A.M. Pacific Standard Time,
BertBerry1@aol.com writes:
Does anyone have any idea which Commander this is?
I have seen the airplane and met the pilot. I spent the night in
Stella Maris when delivering Jimmy Rodriguez 500B to San Juan. It has
A/C, but was inoperative that day. jb
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: STELLA MARIS RESORT |
jm, was it yellow? mason
>From: YOURTCFG@aol.com
>To: commander-list@matronics.com
>Subject: Re: Commander-List: STELLA MARIS RESORT
>Date: Tue, 7 Nov 2006 13:16:06 EST
>
>
>In a message dated 11/7/2006 9:03:54 A.M. Pacific Standard Time,
>BertBerry1@aol.com writes:
>
>Does anyone have any idea which Commander this is?
>
>
>I have seen the airplane and met the pilot. I spent the night in Stella
>Maris when delivering Jimmy Rodriguez 500B to San Juan. It has A/C, but
>was
>inoperative that day. jb
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: STELLA MARIS RESORT |
It must have been, I just found this entry.
THanks Guys for the help.
Bert
Time: 08:18:58 AM PST US
From: YOURTCFG@aol....
Subject: Commander-List: COMMANDERS OF THE CARIBEAN
HI KIDS.
Just got back from delivering Jimmy Rodriguez 500B (S/N1) from San
Juan to John Towner in KC. I stopped at Stella Maris resort for fuel and go
weathered in. Yep, weathered in the the Bahamas!! (Try telling you wife
that!!). Anyway, had a great night there and saw N175AC, another 500B (with
A/C)
operated by the resort. It is in really nice shape.
Then to Opa Locka to clear customs. Then to Boca Raton to deliver
Jimmies life raft for re certification and on to KC.
Had a GREAT trip. The air conditioning and auto pilot worked great!
Good to be home. Triple two is do for her annual this month, 90C
inspection,
new oil cells.
All the registration forms for the fly-in are in the mail. If you want
to attend and dont receive one in the next few days, let me know. It will
be
a great time. It is always a blast!! Richard and Jackie Thompson from
Australia will be riding up with Sue and I.
The long promised vendor list is now complete and will be sent to TCFG
Members. Sue has worked hard on this and it includes some great
information.
We used John Towners list as a foundation and build from there using input
members. We will update it at least once each year so if you have a good
(or
bad) experience, let me know.
Hope all is well in your "Commanderland" jb
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: STELLA MARIS RESORT |
Neat piece of sleuthing Bert. Well done!
Very Best Regards,
Barry
----- Original Message -----
From: BertBerry1@aol.com
To: commander-list@matronics.com
Sent: Tuesday, November 07, 2006 7:37 PM
Subject: Re: Commander-List: STELLA MARIS RESORT
It must have been, I just found this entry.
THanks Guys for the help.
Bert
Time: 08:18:58 AM PST US
From: YOURTCFG@aol....
Subject: Commander-List: COMMANDERS OF THE CARIBEAN
HI KIDS.
Just got back from delivering Jimmy Rodriguez 500B (S/N1)
from San
Juan to John Towner in KC. I stopped at Stella Maris resort for fuel
and go
weathered in. Yep, weathered in the the Bahamas!! (Try telling you
wife
that!!). Anyway, had a great night there and saw N175AC, another
500B (with A/C)
operated by the resort. It is in really nice shape.
Then to Opa Locka to clear customs. Then to Boca Raton to
deliver
Jimmies life raft for re certification and on to KC.
Had a GREAT trip. The air conditioning and auto pilot worked
great!
Good to be home. Triple two is do for her annual this month, 90C
inspection,
new oil cells.
All the registration forms for the fly-in are in the mail. If
you want
to attend and dont receive one in the next few days, let me know. It
will be
a great time. It is always a blast!! Richard and Jackie Thompson
from
Australia will be riding up with Sue and I.
The long promised vendor list is now complete and will be sent to
TCFG
Members. Sue has worked hard on this and it includes some great
information.
We used John Towners list as a foundation and build from there using
input
members. We will update it at least once each year so if you have a
good (or
bad) experience, let me know.
Hope all is well in your "Commanderland" jb
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Hello Matt,
It seems that one of our more important Commander gurus can read messages on the
list, but cannot post any.
His name is John Towner. He owns a company called Central Air and they operate
about 35 Aero Commanders, so his input is valuable to all the guys!
His email address is:
johntowner@centralairsouthwest.com
If you can pinpoint the problem, there will be a lot of grateful "listers".
Thanks Matt!
Best Regards,
Barry Collman
----- Original Message -----
From: "Matt Dralle" <dralle@matronics.com>
Sent: Saturday, June 03, 2006 11:52 PM
Subject: Commander-List: List Enclosure Support
|
| Dear Listers,
|
| Over the years, I have resisted the urge to enable enclosure support on the
Matronics Lists for a number of reasons relating to performance, capacity,
capability, and security. However, its now 2006 and most everyone using email
these days is on an email client that, at some level, supports the viewing and
handling of enclosures. I get a fair amount of email each month from people on
the various Lists asking why their posts of this or that picture didn't go
through.
|
| Back quite a while ago by popular request, I enabled enclosure support for a
few Lists such as the RV10-List, Kolb-List, and the Tailwind-List. Contrary to
my fears, there really hasn't been any significant issues on these Lists
relating to the advent of enclosure support and for the most part, members have
policed themselves well with respect to the size of things they have posted.
|
| Having enclosures enabled on some Lists and not others has given me a fair
amount of headaches with respect to filtering messages and content since the
formats are often quite different between a typical MIME encoded message and a
generic plain-text message. The spammers are getting more cleaver all the time
and are constantly trying to thwart my best efforts at keeping them from posting
to the Lists.
|
| So, for these reasons, I've have decided to go ahead and enable limited
enclosure posting on all of the email Lists at Matronics. This will not only
increase the utility of the Lists, but will afford me a better opportunity to
filter out the chaff.
|
| Here are some of the features and limits of enclosures on the Matronics Lists:
|
| 1) Enclosures will only be posted to the Real Time version of the
| Lists.
|
| 2) Enclosures will NOT be included in the Daily Digest version of
| the Lists.
|
| 3) Enclosures WILL BE forwarded on to the BBS Forum Web site.
|
| 4) Enclosures will NOT be appended to the Archives.
|
| 5) Enclosures will NOT be available in the List Browse feature.
|
| 6) Only the following file types and extensions will be allowed:
|
| jpg, bmp, gif, txt, xls, pdf, and doc
|
| All other enclosures types will be rejected and email returned to
| sender. The enclosure types listed above are relatively safe from
| a virus standpoint and don't pose a particularly large security risk.
|
| 7) !! All incoming enclosures will be scanned for viruses prior to posting
| to the List. This is done in real time and will not slow down
| the process of posting the message !!
|
|
| Here are some rules for posting enclosures. Failure to abide by these rules
could result in the removal of a subscriber's email address from the Lists.
|
| 1) Pay attention to what you are posting!! Make sure that the files
| you are enclosing aren't HUGE (greater that 1MB). Remember that there
| are still people checking they're email via dial up modem. If you post
| 30MB worth of pictures, you are placing an unnecessary burden on these
| folks and the rest of us, for that matter.
|
| 2) SCALE YOUR PICTURES DOWN!!! I don't want to see huge 3000 x 2000
| pictures getting posted that are 3 or 4MB each. This is just
| unacceptable. Use a program such as Photoshop to scale the picture
| down to something on the order of 800 x 600 and try to keep the
| file size to less-than 200KB, preferably much less.
|
| Microsoft has a really awesome utility available for free that allows
| you to Right-Click on a picture in Explorer and automatically
| scale it down and resave it. This is a great utility - get it, use it!
| http://www.microsoft.com/windowsxp/downloads/powertoys/xppowertoys.mspx
| Look for the link "Image Resizer"
|
| 3) !! This would seem to go without saying, but I'll say it anyway. Do not
| post anything that would be considered offensive by your grandmother.
| And you know what I'm saying; I don't want to see anything even
| questionable. !!
|
| 4) REMEMBER THIS: If you post a 1MB enclosure to a List with 1000 members
| subscribed, your 1MB enclosure must be resent 1000 times amounting
| to 1MB X 1000 = 1 Gigabyte of network traffic!! BE CAREFUL and BE COURTEOUS!
|
| I hope everyone will enjoy the added functionality of enclosures. Please
police yourself and use good judgement when posting messages with enclosures
using the guidelines I've outlined above.
|
| Best regards,
|
| Matt Dralle
| Matronics Email List Administrator
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Message 10
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Are there any Idaho Attorneys on the list? If so, please contact me off
list. steveg@nternet.com
Steve Gilson
Message 11
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Sounds ominous.
bilbo
_____
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of steve
Sent: Tuesday, November 07, 2006 8:36 PM
Subject: Commander-List: Idaho
Are there any Idaho Attorneys on the list? If so, please contact me off
list. steveg@nternet.com
Steve Gilson
Message 12
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Any time the word attorney is mentioned it usually ends up being costly.
JT
----- Original Message -----
From: Bill Bow
To: commander-list@matronics.com
Sent: Tuesday, November 07, 2006 7:42 PM
Subject: RE: Commander-List: Idaho
Sounds ominous.
bilbo
-------------------------------------------------------------------------
-----
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of steve
Sent: Tuesday, November 07, 2006 8:36 PM
To: commander-list@matronics.com
Subject: Commander-List: Idaho
Are there any Idaho Attorneys on the list? If so, please contact me
off list. steveg@nternet.com
Steve Gilson
www.aeroelectric.comwww.kitlog.comhttp://www.matronics.com/Navigator?Comm
ander-List
Message 13
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Please help! |
Hi Barry/John,
I see that "johntowner@centralairsouthwest.com" is subscribed to the Commander
List alright, but I'm not showing that he has ever tried to send a post. I don't
find any log entries on the email server or the Spam filter for the email
address "johntowner@centralairsouthwest.com". Maybe John could forward me the
error messages he's getting. He might also want to make sure he is trying to
send to " commander-list@matronics.com " when he posts.
Best regards,
Matt Dralle
Matronics Email List Adminstrator
do not archive
At 02:40 PM 11/7/2006 Tuesday, Barry Collman wrote:
>
>Hello Matt,
>
>It seems that one of our more important Commander gurus can read messages on the
>list, but cannot post any.
>
>His name is John Towner. He owns a company called Central Air and they operate
>about 35 Aero Commanders, so his input is valuable to all the guys!
>
>His email address is:
>
>johntowner@centralairsouthwest.com
>
>If you can pinpoint the problem, there will be a lot of grateful "listers".
>
>Thanks Matt!
>
>Best Regards,
>Barry Collman
Matt G Dralle | Matronics | PO Box 347 | Livermore | CA | 94551
925-606-1001 V | 925-606-6281 F | dralle@matronics.com Email
http://www.matronics.com/ WWW | Featuring Products For Aircraft
Message 14
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Please help! |
John Towner has an airline to run. I wouldn't say he is a guru. He most likely
knows these machines better than any of you ever hope and or dreamed of. I
flew for John for a while, he is a stand up guy, and far, far, more competant
than any commander guru will ever come remotely close to comparing to.
If you had to ask who JT is you most likely missed the boat...and are standing
on dry land.
God Speed JT if your listening...
BAM - N224HA
-------------- Original message --------------
From: "Barry Collman" <barry.collman@air-britain.co.uk>
>
>
> Hello Matt,
>
> It seems that one of our more important Commander gurus can read messages on
the
> list, but cannot post any.
>
> His name is John Towner. He owns a company called Central Air and they operate
> about 35 Aero Commanders, so his input is valuable to all the guys!
>
> His email address is:
>
> johntowner@centralairsouthwest.com
>
> If you can pinpoint the problem, there will be a lot of grateful "listers".
>
> Thanks Matt!
>
> Best Regards,
> Barry Collman
>
> ----- Original Message -----
> From: "Matt Dralle"
> To:
> Sent: Saturday, June 03, 2006 11:52 PM
> Subject: Commander-List: List Enclosure Support
>
>
> Matronics Lists for a number of reasons relating to performance, capacity,
> capability, and security. However, its now 2006 and most everyone using email
> these days is on an email client that, at some level, supports the viewing and
> handling of enclosures. I get a fair amount of email each month from people on
> the various Lists asking why their posts of this or that picture didn't go
> through.
> few Lists such as the RV10-List, Kolb-List, and the Tailwind-List. Contrary to
> my fears, there really hasn't been any significant issues on these Lists
> relating to the advent of enclosure support and for the most part, members have
> policed themselves well with respect to the size of things they have posted.
> amount of headaches with respect to filtering messages and content since the
> formats are often quite different between a typical MIME encoded message and
a
> generic plain-text message. The spammers are getting more cleaver all the time
> and are constantly trying to thwart my best efforts at keeping them from posting
> to the Lists.
> enclosure posting on all of the email Lists at Matronics. This will not only
> increase the utility of the Lists, but will afford me a better opportunity to
> filter out the chaff.
> could result in the removal of a subscriber's email address from the Lists.
> police yourself and use good judgement when posting messages with enclosures
> using the guidelines I've outlined above.
>
>
>
>
>
>
<html><body>
<DIV>John Towner has an airline to run. I wouldn't say he is a guru.
He most likely knows these machines better than any of you ever hope and or dreamed
of. I flew for John for a while, he is a stand up guy,
and far, far, more competant than any commander guru will ever come remotely
close to comparing to. </DIV>
<DIV> </DIV>
<DIV> If you had to ask who JT is you most likely missed the boat...and are
standing on dry land.</DIV>
<DIV> </DIV>
<DIV>God Speed JT if your listening...</DIV>
<DIV> </DIV>
<DIV>BAM - N224HA </DIV>
<DIV> </DIV>
<BLOCKQUOTE style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px
solid">-------------- Original message -------------- <BR>From: "Barry Collman"
<barry.collman@air-britain.co.uk> <BR><BR>> --> Commander-List
message posted by: "Barry Collman" <BR>> <BARRY.COLLMAN@AIR-BRITAIN.CO.UK><BR>>
<BR>> Hello Matt, <BR>> <BR>> It seems that one of our more
important Commander gurus can read messages on the <BR>> list, but cannot post
any. <BR>> <BR>> His name is John Towner. He owns a company called Central
Air and they operate <BR>> about 35 Aero Commanders, so his input is
valuable to all the guys! <BR>> <BR>> His email address is: <BR>> <BR>>
johntowner@centralairsouthwest.com <BR>> <BR>> If you can pinpoint
the problem, there will be a lot of grateful "listers". <BR>> <BR>> Thanks
Matt! <BR>> <BR>> Best Regards, <BR>> Barry Collman <BR>> <BR>>
----- Original Message ----- <BR>> From: "Ma
tt Dra
lle" <DRALLE@MATRONICS.COM><BR>> To: <COMMANDER-LIST@MATRONICS.COM><BR>>
Sent: Saturday, June 03, 2006 11:52 PM <BR>> Subject: Commander-List: List
Enclosure Support <BR>> <BR>> <BR>> | --> Commander-List message posted
by: Matt Dralle <DRALLE@MATRONICS.COM><BR>> | <BR>> | Dear Listers,
<BR>> | <BR>> | Over the years, I have resisted the urge to enable enclosure
support on the <BR>> Matronics Lists for a number of reasons relating
to performance, capacity, <BR>> capability, and security. However, its now
2006 and most everyone using email <BR>> these days is on an email client
that, at some level, supports the viewing and <BR>> handling of enclosures.
I get a fair amount of email each month from people on <BR>> the various
Lists asking why their posts of this or that picture didn't go <BR>> through.
<BR>> | <BR>> | Back quite a while ago by popular request, I enabled
enclosure support for a <BR>> few Lists such as th
e RV10
-List, Kolb-List, and the Tailwind-List. Contrary to <BR>> my fears, there really
hasn't been any significant issues on these Lists <BR>> relating to the
advent of enclosure support and for the most part, members have <BR>> policed
themselves well with respect to the size of things they have posted. <BR>>
| <BR>> | Having enclosures enabled on some Lists and not others has
given me a fair <BR>> amount of headaches with respect to filtering messages
and content since the <BR>> formats are often quite different between a typical
MIME encoded message and a <BR>> generic plain-text message. The spammers
are getting more cleaver all the time <BR>> and are constantly trying
to thwart my best efforts at keeping them from posting <BR>> to the Lists.
<BR>> | <BR>> | So, for these reasons, I've have decided to go ahead and
enable limited <BR>> enclosure posting on all of the email Lists at Matronics.
This will not only <BR>> increase the utilit
y of t
he Lists, but will afford me a better opportunity to <BR>> filter out the chaff.
<BR>> | <BR>> | Here are some of the features and limits of enclosures
on the Matronics Lists: <BR>> | <BR>> | 1) Enclosures will only be posted
to the Real Time version of the <BR>> | Lists. <BR>> | <BR>> |
2) Enclosures will NOT be included in the Daily Digest version of <BR>> | the
Lists. <BR>> | <BR>> | 3) Enclosures WILL BE forwarded on to the BBS
Forum Web site. <BR>> | <BR>> | 4) Enclosures will NOT be appended to the
Archives. <BR>> | <BR>> | 5) Enclosures will NOT be available in the List
Browse feature. <BR>> | <BR>> | 6) Only the following file types and
extensions will be allowed: <BR>> | <BR>> | jpg, bmp, gif, txt, xls, pdf,
and doc <BR>> | <BR>> | All other enclosures types will be rejected and
email returned to <BR>> | sender. The enclosure types listed above are relatively
safe from <BR>> | a virus standpoint and
don't
pose a particularly large security risk. <BR>> | <BR>> | 7) !! All incoming
enclosures will be scanned for viruses prior to posting <BR>> | to the
List. This is done in real time and will not slow down <BR>> | the process
of posting the message !! <BR>> | <BR>> | <BR>> | Here are some rules
for posting enclosures. Failure to abide by these rules <BR>> could result
in the removal of a subscriber's email address from the Lists. <BR>> | <BR>>
| 1) Pay attention to what you are posting!! Make sure that the files <BR>>
| you are enclosing aren't HUGE (greater that 1MB). Remember that there
<BR>> | are still people checking they're email via dial up modem. If you
post <BR>> | 30MB worth of pictures, you are placing an unnecessary burden
on these <BR>> | folks and the rest of us, for that matter. <BR>> | <BR>>
| 2) SCALE YOUR PICTURES DOWN!!! I don't want to see huge 3000 x 2000 <BR>>
| pictures getting posted that are 3 or 4MB eac
h. Thi
s is just <BR>> | unacceptable. Use a program such as Photoshop to scale the picture <BR>> | down to something on the order of 800 x 600 and try to keep the <BR>> | file size to less-than 200KB, preferably much less. <BR>> | <BR>> | Microsoft has a really awesome utility available for free that allows <BR>> | you to Right-Click on a picture in Explorer and automatically <BR>> | scale it down and resave it. This is a great utility - get it, use it! <BR>> | http://www.microsoft.com/windowsxp/downloads/powertoys/xppowertoys.mspx <BR>> | Look for the link "Image Resizer" <BR>> | <BR>> | 3) !! This would seem to go without saying, but I'll say it anyway. Do not <BR>> | post anything that would be considered offensive by your grandmother. <BR>> | And you know what I'm saying; I don't want to see anything even <BR>> | questionable. !! <BR>> | <BR>> | 4) REMEMBER THIS: If you post a 1MB enclosure to a List with 1000 members <BR>> | s
ubscri
> _
nics.c
<pre><b><font size=2 color="#000000" face="courier new,courier">
</b></font></pre></body></html>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|