Commander-List Digest Sun 07/15/07

Commander-List Digest Archive

Sun 07/15/07

Total Messages Posted: 8



Today's Message Index:
----------------------
 
     1. 06:37 AM - Re: Speed Mod for fat cowl Commanders? (N395V)
     2. 08:13 AM - Re: Re: Speed Mod for fat cowl Commanders? (Bill Bow)
     3. 10:24 AM - Re: Re: Speed Mod for fat cowl Commanders? (Don Girod)
     4. 11:47 AM - Re: Re: Speed Mod for fat cowl Commanders? (Bill Bow)
     5. 02:15 PM - P-366-D Aux Hyd pump (KenWHyde@aol.com)
     6. 03:48 PM - Re: P-366-D Aux Hyd pump (MASON CHEVAILLIER)
     7. 05:15 PM - Re: P-366-D Aux Hyd pump (yourtcfg@aol.com)
     8. 09:11 PM - Re: Paint schemes (nico css)
 
 
 

Message 1


					INDEX  Back to Main INDEX
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 06:37:06 AM PST US
Subject: Re: Speed Mod for fat cowl Commanders?
From: "N395V" <airboss@excaliburaviation.com>      
      
      The short answer is no, in particular to an STC.
      
      The correct terminology is bathtub comander as opposed to fat cowled or Pensui
      which is hinese for fat jowls.
      
      I suspect you could do a lot inside the cowl (where it can't be seen with a bit
      of sheet aluminum and fiberglass.
      
      Thaere ain't enough of them to make an STC economically feasible.
      
      Best speed mod available is the flap gap seal.
      
      --------
      Milt
      2003 F1 Rocket
      2006 Radial Rocket
      
      
      Read this topic online here:
      
      http://forums.matronics.com/viewtopic.php?p=123899#123899
      
      

Message 2


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 08:13:21 AM PST US
From: "Bill Bow" <bowing74@earthlink.net>
Subject: Re: Speed Mod for fat cowl Commanders?      
      
      Lots more power.
      
      bilbo
      
      -----Original Message-----
      From: owner-commander-list-server@matronics.com
      [mailto:owner-commander-list-server@matronics.com] On Behalf Of N395V
      Sent: Sunday, July 15, 2007 9:37 AM
      Subject: Commander-List: Re: Speed Mod for fat cowl Commanders?
      
      <airboss@excaliburaviation.com>
      
      The short answer is no, in particular to an STC.
      
      The correct terminology is bathtub comander as opposed to fat cowled or
      Pensui which is hinese for fat jowls.
      
      I suspect you could do a lot inside the cowl (where it can't be seen with a
      bit of sheet aluminum and fiberglass.
      
      Thaere ain't enough of them to make an STC economically feasible.
      
      Best speed mod available is the flap gap seal.
      
      --------
      Milt
      2003 F1 Rocket
      2006 Radial Rocket
      
      
      Read this topic online here:
      
      http://forums.matronics.com/viewtopic.php?p=123899#123899
      
      

Message 3


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 10:24:13 AM PST US
From: "Don Girod" <dongirod@bellsouth.net>
Subject: Re: Speed Mod for fat cowl Commanders?      
      
      Is that as in "JATO" Bilbo?
      
      Don
      ----- Original Message ----- 
      From: "Bill Bow" <bowing74@earthlink.net>
      Sent: Sunday, July 15, 2007 11:12 AM
      Subject: RE: Commander-List: Re: Speed Mod for fat cowl Commanders?
      
      
      >
      > Lots more power.
      >
      > bilbo
      >
      > -----Original Message-----
      > From: owner-commander-list-server@matronics.com
      > [mailto:owner-commander-list-server@matronics.com] On Behalf Of N395V
      > Sent: Sunday, July 15, 2007 9:37 AM
      > To: commander-list@matronics.com
      > Subject: Commander-List: Re: Speed Mod for fat cowl Commanders?
      >
      > <airboss@excaliburaviation.com>
      >
      > The short answer is no, in particular to an STC.
      >
      > The correct terminology is bathtub comander as opposed to fat cowled or
      > Pensui which is hinese for fat jowls.
      >
      > I suspect you could do a lot inside the cowl (where it can't be seen with 
      > a
      > bit of sheet aluminum and fiberglass.
      >
      > Thaere ain't enough of them to make an STC economically feasible.
      >
      > Best speed mod available is the flap gap seal.
      >
      > --------
      > Milt
      > 2003 F1 Rocket
      > 2006 Radial Rocket
      >
      >
      > Read this topic online here:
      >
      > http://forums.matronics.com/viewtopic.php?p=123899#123899
      >
      >
      > -- 
      > 2:21 PM
      >
      > 
      
      

Message 4


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 11:47:33 AM PST US
From: "Bill Bow" <bowing74@earthlink.net>
Subject: Re: Speed Mod for fat cowl Commanders?      
      
      Maybe Saturn 5!!!!
      bilbo
      
      -----Original Message-----
      From: owner-commander-list-server@matronics.com
      [mailto:owner-commander-list-server@matronics.com] On Behalf Of Don Girod
      Sent: Sunday, July 15, 2007 1:24 PM
      Subject: Re: Commander-List: Re: Speed Mod for fat cowl Commanders?
      
      
      Is that as in "JATO" Bilbo?
      
      Don
      ----- Original Message ----- 
      From: "Bill Bow" <bowing74@earthlink.net>
      Sent: Sunday, July 15, 2007 11:12 AM
      Subject: RE: Commander-List: Re: Speed Mod for fat cowl Commanders?
      
      
      >
      > Lots more power.
      >
      > bilbo
      >
      > -----Original Message-----
      > From: owner-commander-list-server@matronics.com
      > [mailto:owner-commander-list-server@matronics.com] On Behalf Of N395V
      > Sent: Sunday, July 15, 2007 9:37 AM
      > To: commander-list@matronics.com
      > Subject: Commander-List: Re: Speed Mod for fat cowl Commanders?
      >
      > <airboss@excaliburaviation.com>
      >
      > The short answer is no, in particular to an STC.
      >
      > The correct terminology is bathtub comander as opposed to fat cowled or
      > Pensui which is hinese for fat jowls.
      >
      > I suspect you could do a lot inside the cowl (where it can't be seen with 
      > a
      > bit of sheet aluminum and fiberglass.
      >
      > Thaere ain't enough of them to make an STC economically feasible.
      >
      > Best speed mod available is the flap gap seal.
      >
      > --------
      > Milt
      > 2003 F1 Rocket
      > 2006 Radial Rocket
      >
      >
      > Read this topic online here:
      >
      > http://forums.matronics.com/viewtopic.php?p=123899#123899
      >
      >
      > -- 
      > 2:21 PM
      >
      > 
      
      

Message 5


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 02:15:21 PM PST US
From: KenWHyde@aol.com
Subject: P-366-D Aux Hyd pump      
      All,
      
      Looking for overhauled P-366-D aux hyd (5606 fluid) pump or source for  doing 
      overhaul???
      
      Thanks,
      Ken Hyde
      N47AC
      
      
      ************************************** Get a sneak peak of the all-new AOL at 
      http://discover.aol.com/memed/aolcom30tour
      

Message 6


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 03:48:08 PM PST US
From: "MASON CHEVAILLIER" <kamala@MSN.COM>
Subject: Re: P-366-D Aux Hyd pump      
      kh, there are two in tulsa, I will try to look them up. mason
        ----- Original Message ----- 
        From: KenWHyde@aol.com<mailto:KenWHyde@aol.com> 
        To: commander-list@matronics.com<mailto:commander-list@matronics.com> 
        Sent: Sunday, July 15, 2007 4:14 PM
        Subject: Commander-List: P-366-D Aux Hyd pump
      
      
        All,
      
        Looking for overhauled P-366-D aux hyd (5606 fluid) pump or source for 
      doing overhaul???
      
        Thanks,
        Ken Hyde
        N47AC
      
      
      -------------------------------------------------------------------------
      -----
        Get a sneak peak of the all-new 
      AOL.com<http://discover.aol.com/memed/aolcom30tour/?ncid=AOLAOF00020000
      000982>.
      
      
      http://www.matronics.com/Navigator?Commander-List<http://www.matronics.co
      m/Navigator?Commander-List>
      
      

Message 7


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 05:15:13 PM PST US
Subject: Re: P-366-D Aux Hyd pump
From: yourtcfg@aol.com      
      HI KEN.? Try Quality A/C Accessories Tulsa 877-833-6948? jb
      
      
      -----Original Message-----
      From: KenWHyde@aol.com
      Sent: Sun, 15 Jul 2007 2:14 pm
      Subject: Commander-List: P-366-D Aux Hyd pump
      
      
      All,
      
      ?
      
      Looking for overhauled P-366-D aux hyd (5606 fluid) pump or source for doing overhaul???
      
      ?
      
      Thanks,
      
      Ken Hyde
      
      N47AC
      
      ?
      
      
      Get a sneak peak of the all-new AOL.com.
      
      
      ________________________________________________________________________
      

Message 8


					INDEX  Back to Main INDEX
				PREVIOUS  Skip to PREVIOUS Message
					NEXT  Skip to NEXT Message
	LIST  Reply to LIST Regarding this Message
		SENDER  Reply to SENDER Regarding this Message

      
      
Time: 09:11:03 PM PST US
From: "nico css" <nico@cybersuperstore.com>
Subject: Paint schemes      
      Hi Jorge
      
      
      The link changed as we try to remove all spaces from the URLs 
      
      
      http://www.teletuition.org/documents/Aviation/AeroCommanders/N461JB/
      
      
      Will you be at the fly-in? I hope to make it this year.
      
      
      Thanks
      
      
      Nico
      
      
        _____  
      
      From: owner-commander-list-server@matronics.com
      [mailto:owner-commander-list-server@matronics.com] On Behalf Of
      AEROCOMAND@aol.com
      Sent: Saturday, August 26, 2006 4:22 PM
      Subject: Re: Commander-List: Paint schemes
      
      
      In a message dated 8/26/2006 3:47:28 PM Mountain Standard Time,
      nico@cybersuperstore.com writes:
      
      http://www.teletuition.org/documents/Aviation/Aero%20Commanders/N461JB/
      
      IT IS SUCH A PLEASURE TO SEE N461JB ON THIS SITE....
      
      
      THE PAINT SCHEME OF WHITE...BLUE AND GOLD TRIM  IS A UTOPIA...
      
      
      I JUST FINISHED BUFFING EVERY BIT OF IT AS N261JG
      
      
      GREETING
      
      
      JORGE GONZALEZ
      
      
      SANDIA AIRPARK NORTH..(COMING SOON)
      
      
      320 DAYS OF NO... IFR
      
      
      SANDIA AIRPARK.COM
      
      








Other Matronics Email List Services




Post A New Message    commander-list@matronics.com
UN/SUBSCRIBE    http://www.matronics.com/subscription
List FAQ    http://www.matronics.com/FAQ/Commander-List.htm
Web Forum Interface To Lists    http://forums.matronics.com
Matronics List Wiki    http://wiki.matronics.com
7-Day List Browse    http://www.matronics.com/browse/commander-list
Browse Commander-List Digests    http://www.matronics.com/digest/commander-list
Browse Other Lists    http://www.matronics.com/browse
Live Online Chat!    http://www.matronics.com/chat
Archive Downloading    http://www.matronics.com/archives
Photo Share    http://www.matronics.com/photoshare
Other Email Lists    http://www.matronics.com/emaillists
Contributions    http://www.matronics.com/contribution









These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.




-- Please support this service by making your Contribution today! --