---------------------------------------------------------- Commander-List Digest Archive --- Total Messages Posted Sun 07/15/07: 8 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:37 AM - Re: Speed Mod for fat cowl Commanders? (N395V) 2. 08:13 AM - Re: Re: Speed Mod for fat cowl Commanders? (Bill Bow) 3. 10:24 AM - Re: Re: Speed Mod for fat cowl Commanders? (Don Girod) 4. 11:47 AM - Re: Re: Speed Mod for fat cowl Commanders? (Bill Bow) 5. 02:15 PM - P-366-D Aux Hyd pump (KenWHyde@aol.com) 6. 03:48 PM - Re: P-366-D Aux Hyd pump (MASON CHEVAILLIER) 7. 05:15 PM - Re: P-366-D Aux Hyd pump (yourtcfg@aol.com) 8. 09:11 PM - Re: Paint schemes (nico css) ________________________________ Message 1 _____________________________________ Time: 06:37:06 AM PST US Subject: Commander-List: Re: Speed Mod for fat cowl Commanders? From: "N395V" The short answer is no, in particular to an STC. The correct terminology is bathtub comander as opposed to fat cowled or Pensui which is hinese for fat jowls. I suspect you could do a lot inside the cowl (where it can't be seen with a bit of sheet aluminum and fiberglass. Thaere ain't enough of them to make an STC economically feasible. Best speed mod available is the flap gap seal. -------- Milt 2003 F1 Rocket 2006 Radial Rocket Read this topic online here: http://forums.matronics.com/viewtopic.php?p=123899#123899 ________________________________ Message 2 _____________________________________ Time: 08:13:21 AM PST US From: "Bill Bow" Subject: RE: Commander-List: Re: Speed Mod for fat cowl Commanders? Lots more power. bilbo -----Original Message----- From: owner-commander-list-server@matronics.com [mailto:owner-commander-list-server@matronics.com] On Behalf Of N395V Sent: Sunday, July 15, 2007 9:37 AM Subject: Commander-List: Re: Speed Mod for fat cowl Commanders? The short answer is no, in particular to an STC. The correct terminology is bathtub comander as opposed to fat cowled or Pensui which is hinese for fat jowls. I suspect you could do a lot inside the cowl (where it can't be seen with a bit of sheet aluminum and fiberglass. Thaere ain't enough of them to make an STC economically feasible. Best speed mod available is the flap gap seal. -------- Milt 2003 F1 Rocket 2006 Radial Rocket Read this topic online here: http://forums.matronics.com/viewtopic.php?p=123899#123899 ________________________________ Message 3 _____________________________________ Time: 10:24:13 AM PST US From: "Don Girod" Subject: Re: Commander-List: Re: Speed Mod for fat cowl Commanders? Is that as in "JATO" Bilbo? Don ----- Original Message ----- From: "Bill Bow" Sent: Sunday, July 15, 2007 11:12 AM Subject: RE: Commander-List: Re: Speed Mod for fat cowl Commanders? > > Lots more power. > > bilbo > > -----Original Message----- > From: owner-commander-list-server@matronics.com > [mailto:owner-commander-list-server@matronics.com] On Behalf Of N395V > Sent: Sunday, July 15, 2007 9:37 AM > To: commander-list@matronics.com > Subject: Commander-List: Re: Speed Mod for fat cowl Commanders? > > > > The short answer is no, in particular to an STC. > > The correct terminology is bathtub comander as opposed to fat cowled or > Pensui which is hinese for fat jowls. > > I suspect you could do a lot inside the cowl (where it can't be seen with > a > bit of sheet aluminum and fiberglass. > > Thaere ain't enough of them to make an STC economically feasible. > > Best speed mod available is the flap gap seal. > > -------- > Milt > 2003 F1 Rocket > 2006 Radial Rocket > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=123899#123899 > > > -- > 2:21 PM > > ________________________________ Message 4 _____________________________________ Time: 11:47:33 AM PST US From: "Bill Bow" Subject: RE: Commander-List: Re: Speed Mod for fat cowl Commanders? Maybe Saturn 5!!!! bilbo -----Original Message----- From: owner-commander-list-server@matronics.com [mailto:owner-commander-list-server@matronics.com] On Behalf Of Don Girod Sent: Sunday, July 15, 2007 1:24 PM Subject: Re: Commander-List: Re: Speed Mod for fat cowl Commanders? Is that as in "JATO" Bilbo? Don ----- Original Message ----- From: "Bill Bow" Sent: Sunday, July 15, 2007 11:12 AM Subject: RE: Commander-List: Re: Speed Mod for fat cowl Commanders? > > Lots more power. > > bilbo > > -----Original Message----- > From: owner-commander-list-server@matronics.com > [mailto:owner-commander-list-server@matronics.com] On Behalf Of N395V > Sent: Sunday, July 15, 2007 9:37 AM > To: commander-list@matronics.com > Subject: Commander-List: Re: Speed Mod for fat cowl Commanders? > > > > The short answer is no, in particular to an STC. > > The correct terminology is bathtub comander as opposed to fat cowled or > Pensui which is hinese for fat jowls. > > I suspect you could do a lot inside the cowl (where it can't be seen with > a > bit of sheet aluminum and fiberglass. > > Thaere ain't enough of them to make an STC economically feasible. > > Best speed mod available is the flap gap seal. > > -------- > Milt > 2003 F1 Rocket > 2006 Radial Rocket > > > Read this topic online here: > > http://forums.matronics.com/viewtopic.php?p=123899#123899 > > > -- > 2:21 PM > > ________________________________ Message 5 _____________________________________ Time: 02:15:21 PM PST US From: KenWHyde@aol.com Subject: Commander-List: P-366-D Aux Hyd pump All, Looking for overhauled P-366-D aux hyd (5606 fluid) pump or source for doing overhaul??? Thanks, Ken Hyde N47AC ************************************** Get a sneak peak of the all-new AOL at http://discover.aol.com/memed/aolcom30tour ________________________________ Message 6 _____________________________________ Time: 03:48:08 PM PST US From: "MASON CHEVAILLIER" Subject: Re: Commander-List: P-366-D Aux Hyd pump kh, there are two in tulsa, I will try to look them up. mason ----- Original Message ----- From: KenWHyde@aol.com To: commander-list@matronics.com Sent: Sunday, July 15, 2007 4:14 PM Subject: Commander-List: P-366-D Aux Hyd pump All, Looking for overhauled P-366-D aux hyd (5606 fluid) pump or source for doing overhaul??? Thanks, Ken Hyde N47AC ------------------------------------------------------------------------- ----- Get a sneak peak of the all-new AOL.com. http://www.matronics.com/Navigator?Commander-List ________________________________ Message 7 _____________________________________ Time: 05:15:13 PM PST US Subject: Re: Commander-List: P-366-D Aux Hyd pump From: yourtcfg@aol.com HI KEN.? Try Quality A/C Accessories Tulsa 877-833-6948? jb -----Original Message----- From: KenWHyde@aol.com Sent: Sun, 15 Jul 2007 2:14 pm Subject: Commander-List: P-366-D Aux Hyd pump All, ? Looking for overhauled P-366-D aux hyd (5606 fluid) pump or source for doing overhaul??? ? Thanks, Ken Hyde N47AC ? Get a sneak peak of the all-new AOL.com. ________________________________________________________________________ ________________________________ Message 8 _____________________________________ Time: 09:11:03 PM PST US From: "nico css" Subject: RE: Commander-List: Paint schemes Hi Jorge The link changed as we try to remove all spaces from the URLs http://www.teletuition.org/documents/Aviation/AeroCommanders/N461JB/ Will you be at the fly-in? I hope to make it this year. Thanks Nico _____ From: owner-commander-list-server@matronics.com [mailto:owner-commander-list-server@matronics.com] On Behalf Of AEROCOMAND@aol.com Sent: Saturday, August 26, 2006 4:22 PM Subject: Re: Commander-List: Paint schemes In a message dated 8/26/2006 3:47:28 PM Mountain Standard Time, nico@cybersuperstore.com writes: http://www.teletuition.org/documents/Aviation/Aero%20Commanders/N461JB/ IT IS SUCH A PLEASURE TO SEE N461JB ON THIS SITE.... THE PAINT SCHEME OF WHITE...BLUE AND GOLD TRIM IS A UTOPIA... I JUST FINISHED BUFFING EVERY BIT OF IT AS N261JG GREETING JORGE GONZALEZ SANDIA AIRPARK NORTH..(COMING SOON) 320 DAYS OF NO... IFR SANDIA AIRPARK.COM ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message commander-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Commander-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/commander-list Browse Digests http://www.matronics.com/digest/commander-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.