Today's Message Index:
----------------------
1. 03:35 AM - Re: Weight & Balance (Steve @ Col-East)
2. 04:41 AM - Re: Re: New Interior (skyhawkc-172@comcast.net)
3. 07:58 AM - Re: Weight & Balance (Donnie Rose)
4. 08:14 AM - Re: Weight & Balance (Steve at Col-East)
5. 09:21 AM - Re: Weight & Balance (Donnie Rose)
6. 11:03 AM - Airport Code: LAT (Barry Collman)
7. 12:08 PM - Re: Airport Code: LAT (Barry Collman)
8. 12:33 PM - 500B (Donnie Rose)
9. 03:57 PM - Re: Airport Code: LAT (BobsV35B@aol.com)
10. 04:33 PM - Re: Airport Code: LAT (Barry Collman)
11. 05:18 PM - Re: 500B (skyhawkc-172@comcast.net)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| From: | "Steve @ Col-East" <steve2@sover.net> |
| Subject: | Re: Weight & Balance |
David,
The attachment worked fine. This is a really nice sheet! I probably
wouldn't have built the graphics on my own, so I'm glad to have them.
Thanks for sharing it.......
I look forward to getting Gordon's work so I can rejigger it for our use
here.
Thanks guys,
Steve
----- Original Message -----
From: David Fitzgerald
To: commander-list@matronics.com
Sent: Thursday, July 19, 2007 12:04 AM
Subject: RE: Commander-List: Weight & Balance
I don't know if attachments work but this is a homemade one
Cheers
Dr David Fitzgerald
BMedSci(Hons) MBBS(Hons) ACCAM DipAvMed(Otago)
CASA Medical Officer
Designated Aviation Medical Examiner and Commercial Pilot, Tasair
Zinifex Hobart Smelter and Rosebery Mine Medical Officer
Registrar in Occupational Medicine
DavidFitzgerald@bigpond.com
mob 0438 312973
-------------------------------------------------------------------------
-----
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of Donnie
Rose
Sent: Thursday, July 19, 2007 1:58 PM
To: commander-list@matronics.com
Subject: Re: Commander-List: Weight & Balance
WCG, I lok fwd to seeing the sheets!
Donnie Rose
205/492-8444
----- Original Message ----
From: "cloudcraft@aol.com" <cloudcraft@aol.com>
To: commander-list@matronics.com
Sent: Wednesday, July 18, 2007 9:13:51 PM
Subject: Re: Commander-List: Weight & Balance
Steve,
When I was at Inter Island Air, I developed an (almost) "one sheet
does all" Weight & Balance / Manifest/ Dispatch sheet for FAR 135
purposes.
It is not a spread sheet but the arms are there and one can do simple
math on the go -- and have the C.G. envelope tables right there.
I'm on a trip for a few days; when I get home I'll upload the template
for the 500 A/B/U/S.
Wing Commander Gordon
-----Original Message-----
From: Steve at Col-East <steve2@sover.net>
To: commander-list@matronics.com
Sent: Wed, 18 Jul 2007 1:24 pm
Subject: Commander-List: Weight & Balance
<steve2@sover.net>
Folks,
Before I go and reinvent the wheel, has anyone built a 500 series, or
Commander specific spreadsheet I can adapt?
If not, a good generic sheet would work just fine as a beginning
point. I'll compare the end results with numerous loading scenarios we
have calculated.
Steve
-------------------------------------------------------------------------
-----
Join our Network Research Panel today!
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: New Interior |
Mason,
Thanxs, we'll check em out.
Brent - N224HA
-------------- Original message --------------
From: MASON CHEVAILLIER <kamala@MSN.COM>
fullers upolstry wataga, tx.
> Subject: Commander-List: Re: New Interior
> From: Skyhawkc-172@comcast.net
> Date: Tue, 17 Jul 2007 14:32:20 -0700
> To: commander-list@matronics.com
>
>
> Thanks for the info, no I don't think we'll do any of the work ourselfes.
>
> Brent - N224HA
>
>
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=124444#124444
>
>
>
>
>
>
>
>
<html><body>
<DIV>Mason,</DIV>
<DIV> </DIV>
<DIV>Thanxs, we'll check em out.</DIV>
<DIV> </DIV>
<DIV>Brent - N224HA</DIV>
<DIV> </DIV>
<BLOCKQUOTE style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px
solid">-------------- Original message -------------- <BR>From: MASON CHEVAILLIER
<kamala@MSN.COM> <BR>
<STYLE>
P
{
margin:0px;
padding:0px
}
body
{
FONT-SIZE: 10pt;
FONT-FAMILY:Tahoma
}
</STYLE>
fullers upolstry wataga, tx.<BR><BR><BR><BR>
<HR id=stopSpelling>
> Subject: Commander-List: Re: New Interior<BR>> From: Skyhawkc-172@comcast.net<BR>> Date: Tue, 17 Jul 2007 14:32:20 -0700<BR>> To: commander-list@matronics.com<BR>> <BR>> --> Commander-List message posted by: "Skyhawkc-172" <Skyhawkc-172@comcast.net><BR>> <BR>> Thanks for the info, no I don't think we'll do any of the work ourselfes.<BR>> <BR>> Brent - N224HA<BR>> <BR>> <BR>> <BR>> <BR>> Read this topic online here:<BR>> <BR>> http://forums.matronics.com/viewtopic.php?p=124444#124444<BR>> <BR>> <BR>> <BR>> <BR>> <BR>=<BR>> <BR>> <BR>> <BR><PRE><B><FONT face="courier new,courier" size=2 color000000?>
</B></FONT></PRE></BLOCKQUOTE>
<pre><b><font size=2 color="#000000" face="courier new,courier">
</b></font></pre></body></html>
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Weight & Balance |
Hey Steve, can you please re-send, I didn't get the attachment.=0AThanks,
=0AN69PT=0A =0ADonnie Rose =0A205/492-8444=0A =0A=0A=0A=0A----- Original Me
ssage ----=0AFrom: "Steve @ Col-East" <steve2@sover.net>=0ATo: commander-li
st@matronics.com=0ASent: Thursday, July 19, 2007 5:35:47 AM=0ASubject: Re:
Commander-List: Weight & Balance=0A=0A=0ADavid,=0A =0AThe attachment worked
fine. This is a really nice sheet! I probably wouldn't have built the grap
hics on my own, so I'm glad to have them. Thanks for sharing it.......=0A
=0AI look forward to getting Gordon's work so I can rejigger it for our use
here.=0A =0AThanks guys,=0A =0ASteve=0A----- Original Message ----- =0AFro
m: David Fitzgerald =0ATo: commander-list@matronics.com =0ASent: Thursday,
July 19, 2007 12:04 AM=0ASubject: RE: Commander-List: Weight & Balance=0A
=0A=0AI don=A2t know if attachments work but this is a homemade one=0A =0AC
heers=0A =0A =0A =0ADr David Fitzgerald=0ABMedSci(Hons) MBBS(Hons) ACCAM Di
pAvMed(Otago)=0ACASA Medical Officer=0ADesignated Aviation Medical Examiner
and Commercial Pilot, Tasair=0AZinifex Hobart Smelter and Rosebery Mine Me
dical Officer=0ARegistrar in Occupational Medicine=0ADavidFitzgerald@bigpon
d.com=0Amob 0438 312973=0A=0A=0A=0AFrom: owner-commander-list-server@matron
ics.com [mailto:owner-commander-list-server@matronics.com] On Behalf Of Don
nie Rose=0ASent: Thursday, July 19, 2007 1:58 PM=0ATo: commander-list@matro
nics.com=0ASubject: Re: Commander-List: Weight & Balance=0A =0AWCG, I lok f
wd to seeing the sheets!=0A =0ADonnie Rose =0A205/492-8444=0A =0A =0A-----
Original Message ----=0AFrom: "cloudcraft@aol.com" <cloudcraft@aol.com>=0AT
o: commander-list@matronics.com=0ASent: Wednesday, July 18, 2007 9:13:51 PM
=0ASubject: Re: Commander-List: Weight & Balance=0ASteve,=0A=0AWhen I was a
t Inter Island Air, I developed an (almost) "one sheet does all" Weight & B
alance / Manifest/ Dispatch sheet for FAR 135 purposes.=0A=0AIt is not a sp
read sheet but the arms are there and one can do simple math on the go -- a
nd have the C.G. envelope tables right there.=0A=0AI'm on a trip for a few
days; when I get home I'll upload the template for the 500 A/B/U/S.=0A=0AWi
ng Commander Gordon=0A =0A =0A-----Original Message-----=0AFrom: Steve at C
ol-East <steve2@sover.net>=0ATo: commander-list@matronics.com=0ASent: Wed,
18 Jul 2007 1:24 pm=0ASubject: Commander-List: Weight & Balance=0A--> Comma
nder-List message posted by: "Steve at Col-East" <steve2@sover.net> =0A =0A
Folks, =0A =0ABefore I go and reinvent the wheel, has anyone built a 500 se
ries, or Commander specific spreadsheet I can adapt? =0A =0AIf not, a good
generic sheet would work just fine as a beginning point. I'll compare the e
nd results with numerous loading scenarios we have calculated. =0A =0ASteve
=0A =0A =0A=0A=0A=0AJoin our Network Research Panel today!=0A =0A =0A
=============0A=0A=0A =0A____________________
________________________________________________________________Ready for t
he edge of your seat? =0ACheck out tonight's top picks on Yahoo! TV. =0Ahtt
p://tv.yahoo.com/
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Weight & Balance |
Donnie,
That spreadsheet was sent courtesy of David down-under. I'll send the
copy I received to your Yahoo mail. I'm tweaking it to read in lbs and
inches...... If you want one when I'm done I'll send it along.....
Steve
----- Original Message -----
From: Donnie Rose
To: commander-list@matronics.com
Sent: Thursday, July 19, 2007 10:57 AM
Subject: Re: Commander-List: Weight & Balance
Hey Steve, can you please re-send, I didn't get the attachment.
Thanks,
N69PT
Donnie Rose
205/492-8444
----- Original Message ----
From: "Steve @ Col-East" <steve2@sover.net>
To: commander-list@matronics.com
Sent: Thursday, July 19, 2007 5:35:47 AM
Subject: Re: Commander-List: Weight & Balance
David,
The attachment worked fine. This is a really nice sheet! I probably
wouldn't have built the graphics on my own, so I'm glad to have them.
Thanks for sharing it.......
I look forward to getting Gordon's work so I can rejigger it for our
use here.
Thanks guys,
Steve
----- Original Message -----
From: David Fitzgerald
To: commander-list@matronics.com
Sent: Thursday, July 19, 2007 12:04 AM
Subject: RE: Commander-List: Weight & Balance
I don=A2t know if attachments work but this is a homemade one
Cheers
Dr David Fitzgerald
BMedSci(Hons) MBBS(Hons) ACCAM DipAvMed(Otago)
CASA Medical Officer
Designated Aviation Medical Examiner and Commercial Pilot, Tasair
Zinifex Hobart Smelter and Rosebery Mine Medical Officer
Registrar in Occupational Medicine
DavidFitzgerald@bigpond.com
mob 0438 312973
-------------------------------------------------------------------------
---
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of Donnie
Rose
Sent: Thursday, July 19, 2007 1:58 PM
To: commander-list@matronics.com
Subject: Re: Commander-List: Weight & Balance
WCG, I lok fwd to seeing the sheets!
Donnie Rose
205/492-8444
----- Original Message ----
From: "cloudcraft@aol.com" <cloudcraft@aol.com>
To: commander-list@matronics.com
Sent: Wednesday, July 18, 2007 9:13:51 PM
Subject: Re: Commander-List: Weight & Balance
Steve,
When I was at Inter Island Air, I developed an (almost) "one sheet
does all" Weight & Balance / Manifest/ Dispatch sheet for FAR 135
purposes.
It is not a spread sheet but the arms are there and one can do
simple math on the go -- and have the C.G. envelope tables right there.
I'm on a trip for a few days; when I get home I'll upload the
template for the 500 A/B/U/S.
Wing Commander Gordon
-----Original Message-----
From: Steve at Col-East <steve2@sover.net>
To: commander-list@matronics.com
Sent: Wed, 18 Jul 2007 1:24 pm
Subject: Commander-List: Weight & Balance
<steve2@sover.net>
Folks,
Before I go and reinvent the wheel, has anyone built a 500 series,
or Commander specific spreadsheet I can adapt?
If not, a good generic sheet would work just fine as a beginning
point. I'll compare the end results with numerous loading scenarios we
have calculated.
Steve
-------------------------------------------------------------------------
---
Join our Network Research Panel today! vigator?Commander-List"
target=_blank rel=nofollow>http://www.matronicsums.matronics.com/"
target=_blank
rel=nofollow>http://forums.matronics.============
=
-------------------------------------------------------------------------
-----
Fussy? Opinionated? Impossible to please? Perfect. Join Yahoo!'s user
panel and lay it on us.
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Weight & Balance |
Yes Steve, I would like a tweaked copy, my metric is a little rusty!=0A =0A
Donnie Rose =0A205/492-8444=0A =0A=0A=0A=0A----- Original Message ----=0AFr
om: Steve at Col-East <steve2@sover.net>=0ATo: commander-list@matronics.com
=0ASent: Thursday, July 19, 2007 10:10:16 AM=0ASubject: Re: Commander-List:
Weight & Balance=0A=0A=0ADonnie,=0A =0AThat spreadsheet was sent courtesy
of David down-under. I'll send the copy I received to your Yahoo mail. I'm
tweaking it to read in lbs and inches...... If you want one when I'm done I
'll send it along.....=0A =0ASteve=0A----- Original Message ----- =0AFrom:
Donnie Rose =0ATo: commander-list@matronics.com =0ASent: Thursday, July 19,
2007 10:57 AM=0ASubject: Re: Commander-List: Weight & Balance=0A=0A=0AHey
Steve, can you please re-send, I didn't get the attachment.=0AThanks,=0AN69
PT=0A =0ADonnie Rose =0A205/492-8444=0A =0A=0A=0A=0A----- Original Message
----=0AFrom: "Steve @ Col-East" <steve2@sover.net>=0ATo: commander-list@mat
ronics.com=0ASent: Thursday, July 19, 2007 5:35:47 AM=0ASubject: Re: Comman
der-List: Weight & Balance=0A=0A=0ADavid,=0A =0AThe attachment worked fine.
This is a really nice sheet! I probably wouldn't have built the graphics o
n my own, so I'm glad to have them. Thanks for sharing it.......=0A =0AI lo
ok forward to getting Gordon's work so I can rejigger it for our use here.
=0A =0AThanks guys,=0A =0ASteve=0A----- Original Message ----- =0AFrom: Dav
id Fitzgerald =0ATo: commander-list@matronics.com =0ASent: Thursday, July 1
9, 2007 12:04 AM=0ASubject: RE: Commander-List: Weight & Balance=0A=0A=0AI
don=A2t know if attachments work but this is a homemade one=0A =0ACheers=0A
=0A =0A =0ADr David Fitzgerald=0ABMedSci(Hons) MBBS(Hons) ACCAM DipAvMed(O
tago)=0ACASA Medical Officer=0ADesignated Aviation Medical Examiner and Com
mercial Pilot, Tasair=0AZinifex Hobart Smelter and Rosebery Mine Medical Of
ficer=0ARegistrar in Occupational Medicine=0ADavidFitzgerald@bigpond.com=0A
mob 0438 312973=0A=0A=0A=0AFrom: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of Donnie Rose
=0ASent: Thursday, July 19, 2007 1:58 PM=0ATo: commander-list@matronics.com
=0ASubject: Re: Commander-List: Weight & Balance=0A =0AWCG, I lok fwd to se
eing the sheets!=0A =0ADonnie Rose =0A205/492-8444=0A =0A =0A----- Original
Message ----=0AFrom: "cloudcraft@aol.com" <cloudcraft@aol.com>=0ATo: comma
nder-list@matronics.com=0ASent: Wednesday, July 18, 2007 9:13:51 PM=0ASubje
ct: Re: Commander-List: Weight & Balance=0ASteve,=0A=0AWhen I was at Inter
Island Air, I developed an (almost) "one sheet does all" Weight & Balance /
Manifest/ Dispatch sheet for FAR 135 purposes.=0A=0AIt is not a spread she
et but the arms are there and one can do simple math on the go -- and have
the C.G. envelope tables right there.=0A=0AI'm on a trip for a few days; wh
en I get home I'll upload the template for the 500 A/B/U/S.=0A=0AWing Comma
nder Gordon=0A =0A =0A-----Original Message-----=0AFrom: Steve at Col-East
<steve2@sover.net>=0ATo: commander-list@matronics.com=0ASent: Wed, 18 Jul 2
007 1:24 pm=0ASubject: Commander-List: Weight & Balance=0A--> Commander-Lis
t message posted by: "Steve at Col-East" <steve2@sover.net> =0A =0AFolks,
=0A =0ABefore I go and reinvent the wheel, has anyone built a 500 series, o
r Commander specific spreadsheet I can adapt? =0A =0AIf not, a good generic
sheet would work just fine as a beginning point. I'll compare the end resu
lts with numerous loading scenarios we have calculated. =0A =0ASteve =0A
=0A =0A=0A=0A=0AJoin our Network Research Panel today!=0A =0A =0A =0A=0A
=0A=0A=0A=0A=0A =0Avigator?Commander-List" target=_blank rel=nofollow>
http://www.matronicsums.matronics.com/" target=_blank rel=nofollow>http
://forums.matronics.===============0A=0A=0A=0A
=0A=0A=0A=0AFussy? Opinionated? Impossible to please? Perfect. Join Yahoo!'
s user panel and lay it on us. =0A=0A=0Ahref="http://www.matronics.com/Na
vigator?Commander-List">http://www.matronics.com/Navigator?Commander-List
=0Ahref="http://forums.matronics.com">http://forums.matronics.com=0A=0A
======0A=0A=0A _____________________________________________
_______________________________________=0AShape Yahoo! in your own image.
Join our Network Research Panel today! http://surveylink.yahoo.com/gmrs/y
ahoo_panel_invite.asp?a=7 =0A=0A
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Airport Code: LAT |
Hi Gang,
I have a slide of a NASA Commander taken in December 1968, at "LAT"
airport.
This doesn't seem to be a current code.
My memory is saying Los Angeles Air Terminal, but that source of data
just cannot be relied upon.
Any 'old -timers' out there who can help?
Very Best Regards,
Barry
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Airport Code: LAT |
Hi Gang,
Ah! Memory recall - a rare event nowadays ;-0
I think "LAT" is Lockheed Air Terminal, at Burbank.
If I'm wrong, no doubt somebody well let me know.
Best Regards,
Barry
----- Original Message -----
From: Barry Collman
To: commander-list@matronics.com
Sent: Thursday, July 19, 2007 6:55 PM
Subject: Commander-List: Airport Code: LAT
Hi Gang,
I have a slide of a NASA Commander taken in December 1968, at "LAT"
airport.
This doesn't seem to be a current code.
My memory is saying Los Angeles Air Terminal, but that source of data
just cannot be relied upon.
Any 'old -timers' out there who can help?
Very Best Regards,
Barry
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Gentlemen, I am in desperate immediate need for two door handles for my 500
B. The part number is 5330009. If anyone has them I would greatly appreciat
e a timely response.=0ABest Regards,=0AN69PT=0A =0ADonnie Rose =0A205/492-8
444=0A=0A=0A =0A_____________________________________________________
_______________________________Ready for the edge of your seat? =0ACheck ou
t tonight's top picks on Yahoo! TV. =0Ahttp://tv.yahoo.com/
Message 9
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Airport Code: LAT |
In a message dated 7/19/2007 1:04:49 P.M. Central Daylight Time,
barry.collman@air-britain.co.uk writes:
Hi Gang,
I have a slide of a NASA Commander taken in December 1968, at "LAT" airport.
This doesn't seem to be a current code.
My memory is saying Los Angeles Air Terminal, but that source of data just
cannot be relied upon.
Any 'old -timers' out there who can help?
Very Best Regards,
Barry
How About Lockheed Air Terminal?
Happy Skies,
Old Bob
AKA
Bob Siegfried
Ancient Aviator
Stearman N3977A
Brookeridge Air Park LL22
Downers Grove, IL 60516
630 985-8503
************************************** Get a sneak peek of the all-new AOL at
http://discover.aol.com/memed/aolcom30tour
Message 10
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Airport Code: LAT |
Hi Bob,
Yep! That's what I finally deduced too!
----- Original Message -----
From: BobsV35B@aol.com
To: commander-list@matronics.com
Sent: Thursday, July 19, 2007 11:57 PM
Subject: Re: Commander-List: Airport Code: LAT
In a message dated 7/19/2007 1:04:49 P.M. Central Daylight Time,
barry.collman@air-britain.co.uk writes:
Hi Gang,
I have a slide of a NASA Commander taken in December 1968, at "LAT"
airport.
This doesn't seem to be a current code.
My memory is saying Los Angeles Air Terminal, but that source of
data just cannot be relied upon.
Any 'old -timers' out there who can help?
Very Best Regards,
Barry
How About Lockheed Air Terminal?
Happy Skies,
Old Bob
AKA
Bob Siegfried
Ancient Aviator
Stearman N3977A
Brookeridge Air Park LL22
Downers Grove, IL 60516
630 985-8503
-------------------------------------------------------------------------
-----
Get a sneak peek of the all-new AOL.com.
Message 11
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Does the Aero-Star also have the same handles as the Commanders ?
Brent - N224HA
-------------- Original message --------------
From: Donnie Rose <aquadiver99@yahoo.com>
Gentlemen, I am in desperate immediate need for two door handles for my 500B. The
part number is 5330009. If anyone has them I would greatly appreciate a timely
response.
Best Regards,
N69PT
Donnie Rose
205/492-8444
Pinpoint customers who are looking for what you sell.
<html><body>
<DIV>Does the Aero-Star also have the same handles as the Commanders ?</DIV>
<DIV> </DIV>
<DIV>Brent - N224HA</DIV>
<DIV> </DIV>
<BLOCKQUOTE style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px
solid">-------------- Original message -------------- <BR>From: Donnie Rose
<aquadiver99@yahoo.com> <BR>
<STYLE type=text/css><!-- DIV {margin:0px;} --></STYLE>
<DIV style="FONT-SIZE: 18pt; FONT-FAMILY: times new roman, new york, times, serif">
<DIV> </DIV>
<DIV>Gentlemen, I am in desperate immediate need for two door handles for my 500B.
The part number is 5330009. If anyone has them I would greatly appreciate
a timely response.</DIV>
<DIV>Best Regards,</DIV>
<DIV>N69PT<BR> </DIV>
<DIV><FONT color=#007f7f size=4><STRONG>Donnie Rose <BR>205/492-8444</STRONG></FONT></DIV>
<DIV> </DIV>
<DIV> </DIV></DIV><BR>
<HR SIZE=1>
<A href="http://us.rd.yahoo.com/evt=48250/*http://searchmarketing.yahoo.com/arp/sponsoredsearch_v9.php?o=US2226&cmp=Yahoo&ctv=AprNI&s=Y&s2=EM&b=50">Pinpoint customers </A>who are looking for what you sell. <PRE><B><FONT face="courier new,courier" size=2 color000000?>
</B></FONT></PRE></BLOCKQUOTE>
<pre><b><font size=2 color="#000000" face="courier new,courier">
</b></font></pre></body></html>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|