Today's Message Index:
----------------------
1. 05:49 AM - Re: Heater installation (Trainor, Todd (Storage Practice))
2. 06:17 AM - www.aerocommander.com (Barry Collman)
3. 07:17 AM - Re: www.aerocommander.com (nico css)
4. 08:06 AM - Re: www.aerocommander.com (Barry Collman)
5. 08:14 AM - Re: www.aerocommander.com (JTAddington)
6. 11:54 AM - Re: www.aerocommander.com (nico css)
7. 12:31 PM - Re: www.aerocommander.com (Steve at Col-East)
8. 12:37 PM - Re: www.aerocommander.com (BertBerry1@aol.com)
9. 01:16 PM - Re: www.aerocommander.com (nico css)
10. 01:22 PM - Re: www.aerocommander.com (nico css)
11. 01:44 PM - Re: www.aerocommander.com (JTAddington)
12. 02:13 PM - Re: www.aerocommander.com (Barry Collman)
13. 04:37 PM - Re: www.aerocommander.com (nico css)
14. 04:44 PM - Re: www.aerocommander.com (nico css)
15. 05:08 PM - Re: www.aerocommander.com (JTAddington)
16. 05:52 PM - Re: www.aerocommander.com (yourtcfg@aol.com)
17. 05:53 PM - Re: www.aerocommander.com (yourtcfg@aol.com)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Heater installation |
I am rather new to this list. The website looks very nice and appears that
it was updated a few years ago. (I've been poking around the site for yea
rs, as one of these days I'm going to own an Aero Commander. I think the t
ime is soon.) But I must observe that I thought the website was abondoned.
There are broken links, ASP failures, SQL errors on databases lookups, an
noucments for dates that have past, the 520 specifications has been wrong f
or a long as I can remember, and there does not appears to be any new conte
nt added in a while. What are the intentions of this website. I'd love t
o see this website become a great source for Aero Commander information, su
ch as manuals, photos, stories, advice, service bulletins, checklists, etc.
Todd Trainor, PMP
Project Manager
HP C&I Storage
810-225-4929
________________________________
From: owner-commander-list-server@matronics.com [mailto:owner-commander-lis
t-server@matronics.com] On Behalf Of nico css
Sent: Thursday, December 27, 2007 3:30 PM
Subject: RE: Commander-List: Heater installation
www.aerocommander.com<http://www.aerocommander.com>
I need to take off the 2007 fly-in announcement, but otherwise it should be
in a workable state.
We can add the heater stuff to the Maintenance section off the main menu on
the left-hand side.
Let me know if you find any discrepancies.
Thanks
Nico
________________________________
From: owner-commander-list-server@matronics.com [mailto:owner-commander-lis
t-server@matronics.com] On Behalf Of Nick Martin
Sent: Thursday, December 27, 2007 12:18 PM
Subject: RE: Commander-List: Heater installation
Nico
Where is the web site?
From: owner-commander-list-server@matronics.com [mailto:owner-commander-lis
t-server@matronics.com] On Behalf Of nico css
Sent: Thursday, December 27, 2007 12:02 PM
Subject: RE: Commander-List: Heater installation
Is this something that could benefit other Commander owners? If so, we coul
d put it up on the website, if you want to.
Let me know
Thanks
Nico
________________________________
From: owner-commander-list-server@matronics.com [mailto:owner-commander-lis
t-server@matronics.com] On Behalf Of Moe - Ross Racing Pistons
Sent: Thursday, December 27, 2007 9:44 AM
Subject: RE: Commander-List: Heater installation
Tom,
Please send me your FAX number and I will fax the install booklet ect. My
wife will return from back east Sunday with the digital camera, at which ti
me I will make severa pictures and email them to you.
Regards,
Moe
________________________________
From: owner-commander-list-server@matronics.com [mailto:owner-commander-lis
t-server@matronics.com] On Behalf Of Tom Fisher
Sent: Tuesday, December 25, 2007 9:19 PM
Subject: Re: Commander-List: Heater installation
Wonderful, I would love your information and images to try and figure this
thing out. Frankly I want to rip all the air-conditioning and pressure val
ves units and go simple, I can't wait to see the info, thanks.
Tom F.
tfisher@commandergroup.bc.ca<mailto:tfisher@commandergroup.bc.ca>
----- Original Message -----
From: Moe - Ross Racing Pistons<mailto:moe@rosspistons.com>
Sent: Tuesday, December 25, 2007 9:06 PM
Subject: RE: Commander-List: Heater installation
Tom,
I have a 680F(p) and have had the heater replaced with one which is much si
mpler, better and was cheaper than having the old unit repaired. It also ha
s no AD notes. The guys are in Michigan that did the install. If you are i
nterested I can send pictures and info.
Regards,
Moe Mills
N680RR
680F(p)
________________________________
From: owner-commander-list-server@matronics.com<mailto:owner-commander-list
-server@matronics.com> [mailto:owner-commander-list-server@matronics.com] O
n Behalf Of Tom Fisher
Sent: Monday, December 24, 2007 6:32 PM
Subject: Commander-List: Heater installation
Best of the season to everyone.
I have to replace my cabin heater in the 680FLP, (therefore it's the one in
stalled in the back).
I have the Mr. RPM conversion and am no longer pressurized, (some of the pl
umbing for that appears to be removed).
The direct replacement for it does not fit at all so the engineers have put
it back in the box and plan on sending my heater with it so the assembler
of the other heater will know what it looks like and what it has to fit.
My engineers have asked me to get help from you all in the form of pictures
of the duct work that carries the air from the scoop to the heater as well
as any air plumbing in the tail.
Harry, do you have pictures of yours you can send?
Thanks for anything anyone can send.
Tom
C-GISS
680FLP (Mr.RPM)
href="http://www.matronics.com/contribution">http://www.matronics.com/chr
ef="http://www.matronics.com/Navigator?Commander-List">http://www.matroni
cs.com/Navigator?Commander-List
href="http://forums.matronics.com">http://forums.matronics.com
href="http://www.matronics.com/contribution">http://www.matronics.com/chr
ef="http://www.matronics.com/Navigator?Commander-List">http://www.matroni
cs.com/Navigator?Commander-List
href="http://forums.matronics.com">http://forums.matronics.com
href="http://www.matronics.com/contribution">http://www.matronics.com/chr
ef="http://www.matronics.com/Navigator?Commander-List">http://www.matroni
cs.com/Navigator?Commander-List
href="http://forums.matronics.com">http://forums.matronics.com
href="http://www.matronics.com/contribution">http://www.matronics.com/chr
ef="http://www.matronics.com/Navigator?Commander-List">http://www.matroni
cs.com/Navigator?Commander-List
href="http://forums.matronics.com">http://forums.matronics.com
http://www.matronics.com/contribution
http://www.matronics.com/Navigator?Commander-List
http://forums.matronics.com
href="http://www.matronics.com/contribution">http://www.matronics.com/chr
ef="http://www.matronics.com/Navigator?Commander-List">http://www.matroni
cs.com/Navigator?Commander-List
href="http://forums.matronics.com">http://forums.matronics.com
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | www.aerocommander.com |
Hi Todd,
I haven't looked at the "Models" section of the Website and you're
absolutely right, the details given for the Model 520 are totally wrong!
In fact, it looks as though most of the specifications for many of the
Models are wrong, and the Specifications for one Model have been
repeated for other Models. The details shown for the Model 520 are, in
fact, those for the Model 500 and the Model 520 details appear when
Model 560 is selected!
It looks as though when I get the proverbial 5 minutes, I'll have
prepare a new listing for Nico to get the correct details against each
of the Models.
Grateful thanks for pointing this out Todd!
Barry Collman
UK CommanderLand Rep.
High Wycombe, England
"Live life on the edge - if you don't take up too much space"
----- Original Message -----
From: Trainor, Todd (Storage Practice)
To: commander-list@matronics.com
Sent: Friday, December 28, 2007 1:47 PM
Subject: RE: Commander-List: Heater installation
I am rather new to this list. The website looks very nice and appears
that it was updated a few years ago. (I've been poking around the site
for years, as one of these days I'm going to own an Aero Commander. I
think the time is soon.) But I must observe that I thought the website
was abondoned. There are broken links, ASP failures, SQL errors on
databases lookups, annoucments for dates that have past, the 520
specifications has been wrong for a long as I can remember, and there
does not appears to be any new content added in a while. What are the
intentions of this website. I'd love to see this website become a great
source for Aero Commander information, such as manuals, photos, stories,
advice, service bulletins, checklists, etc.
Todd Trainor, PMP
Project Manager
HP C&I Storage
810-225-4929
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | www.aerocommander.com |
You guys are, of course, absolutely right. Sorry about that. I think I asked
for specs for the other models at the time when I built out the scope of the
models but when nothing was forthcoming (I am not pointing fingers here) it
went out of mind. Without specs for some models I merely duplicated the
specs of what I had to 'fill' the pages but it was not meant for it to
remain so for that long. I added the jets and singles onto the site as well.
I will post new and updated specs if someone would furnish them. It is in
the plan also that the site's design be altered to make it fit the viewer's
browser so that content can be more productively shown. The models I show
were harvested from all over the 'net and not all of them had the correct
aspect ratio, which explains the distortion on some of them.
The broken links need to be fixed.
Thanks
Nico
_____
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of Barry
Collman
Sent: Friday, December 28, 2007 6:16 AM
Subject: Commander-List: www.aerocommander.com
Hi Todd,
I haven't looked at the "Models" section of the Website and you're
absolutely right, the details given for the Model 520 are totally wrong!
In fact, it looks as though most of the specifications for many of the
Models are wrong, and the Specifications for one Model have been repeated
for other Models. The details shown for the Model 520 are, in fact, those
for the Model 500 and the Model 520 details appear when Model 560 is
selected!
It looks as though when I get the proverbial 5 minutes, I'll have prepare a
new listing for Nico to get the correct details against each of the Models.
Grateful thanks for pointing this out Todd!
Barry Collman
UK CommanderLand Rep.
High Wycombe, England
"Live life on the edge - if you don't take up too much space"
----- Original Message -----
From: Trainor, Todd <mailto:Todd.Trainor@hp.com> (Storage Practice)
Sent: Friday, December 28, 2007 1:47 PM
Subject: RE: Commander-List: Heater installation
I am rather new to this list. The website looks very nice and appears that
it was updated a few years ago. (I've been poking around the site for
years, as one of these days I'm going to own an Aero Commander. I think the
time is soon.) But I must observe that I thought the website was abondoned.
There are broken links, ASP failures, SQL errors on databases lookups,
annoucments for dates that have past, the 520 specifications has been wrong
for a long as I can remember, and there does not appears to be any new
content added in a while. What are the intentions of this website. I'd
love to see this website become a great source for Aero Commander
information, such as manuals, photos, stories, advice, service bulletins,
checklists, etc.
Todd Trainor, PMP
Project Manager
HP C&I Storage
810-225-4929
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: www.aerocommander.com |
Hi Nico,
I will get the correct Specs to you, but will need a little time.
I may not be able to get round to doing it until next year ;-)
Let me know what format you want the data in, plus font and size etc.
Best Regards,
Barry
----- Original Message -----
From: nico css
To: commander-list@matronics.com
Sent: Friday, December 28, 2007 3:16 PM
Subject: RE: Commander-List: www.aerocommander.com
You guys are, of course, absolutely right. Sorry about that. I think I
asked for specs for the other models at the time when I built out the
scope of the models but when nothing was forthcoming (I am not pointing
fingers here) it went out of mind. Without specs for some models I
merely duplicated the specs of what I had to 'fill' the pages but it was
not meant for it to remain so for that long. I added the jets and
singles onto the site as well.
I will post new and updated specs if someone would furnish them. It is
in the plan also that the site's design be altered to make it fit the
viewer's browser so that content can be more productively shown. The
models I show were harvested from all over the 'net and not all of them
had the correct aspect ratio, which explains the distortion on some of
them.
The broken links need to be fixed.
Thanks
Nico
-------------------------------------------------------------------------
-----
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of Barry
Collman
Sent: Friday, December 28, 2007 6:16 AM
To: commander-list@matronics.com
Subject: Commander-List: www.aerocommander.com
Hi Todd,
I haven't looked at the "Models" section of the Website and you're
absolutely right, the details given for the Model 520 are totally wrong!
In fact, it looks as though most of the specifications for many of the
Models are wrong, and the Specifications for one Model have been
repeated for other Models. The details shown for the Model 520 are, in
fact, those for the Model 500 and the Model 520 details appear when
Model 560 is selected!
It looks as though when I get the proverbial 5 minutes, I'll have
prepare a new listing for Nico to get the correct details against each
of the Models.
Grateful thanks for pointing this out Todd!
Barry Collman
UK CommanderLand Rep.
High Wycombe, England
"Live life on the edge - if you don't take up too much space"
----- Original Message -----
From: Trainor, Todd (Storage Practice)
To: commander-list@matronics.com
Sent: Friday, December 28, 2007 1:47 PM
Subject: RE: Commander-List: Heater installation
I am rather new to this list. The website looks very nice and
appears that it was updated a few years ago. (I've been poking around
the site for years, as one of these days I'm going to own an Aero
Commander. I think the time is soon.) But I must observe that I
thought the website was abondoned. There are broken links, ASP
failures, SQL errors on databases lookups, annoucments for dates that
have past, the 520 specifications has been wrong for a long as I can
remember, and there does not appears to be any new content added in a
while. What are the intentions of this website. I'd love to see this
website become a great source for Aero Commander information, such as
manuals, photos, stories, advice, service bulletins, checklists, etc.
Todd Trainor, PMP
Project Manager
HP C&I Storage
810-225-4929
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | www.aerocommander.com |
Nico, I for one appreciate what you have done even though some of it may not
be right, and that is because we have not given you the support you needed.
Keep up the good work.
Jim Addington
N444BD
500A
_____
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of nico css
Sent: Friday, December 28, 2007 9:17 AM
Subject: RE: Commander-List: www.aerocommander.com
You guys are, of course, absolutely right. Sorry about that. I think I asked
for specs for the other models at the time when I built out the scope of the
models but when nothing was forthcoming (I am not pointing fingers here) it
went out of mind. Without specs for some models I merely duplicated the
specs of what I had to 'fill' the pages but it was not meant for it to
remain so for that long. I added the jets and singles onto the site as well.
I will post new and updated specs if someone would furnish them. It is in
the plan also that the site's design be altered to make it fit the viewer's
browser so that content can be more productively shown. The models I show
were harvested from all over the 'net and not all of them had the correct
aspect ratio, which explains the distortion on some of them.
The broken links need to be fixed.
Thanks
Nico
_____
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of Barry
Collman
Sent: Friday, December 28, 2007 6:16 AM
Subject: Commander-List: www.aerocommander.com
Hi Todd,
I haven't looked at the "Models" section of the Website and you're
absolutely right, the details given for the Model 520 are totally wrong!
In fact, it looks as though most of the specifications for many of the
Models are wrong, and the Specifications for one Model have been repeated
for other Models. The details shown for the Model 520 are, in fact, those
for the Model 500 and the Model 520 details appear when Model 560 is
selected!
It looks as though when I get the proverbial 5 minutes, I'll have prepare a
new listing for Nico to get the correct details against each of the Models.
Grateful thanks for pointing this out Todd!
Barry Collman
UK CommanderLand Rep.
High Wycombe, England
"Live life on the edge - if you don't take up too much space"
----- Original Message -----
From: Trainor, Todd <mailto:Todd.Trainor@hp.com> (Storage Practice)
Sent: Friday, December 28, 2007 1:47 PM
Subject: RE: Commander-List: Heater installation
I am rather new to this list. The website looks very nice and appears that
it was updated a few years ago. (I've been poking around the site for
years, as one of these days I'm going to own an Aero Commander. I think the
time is soon.) But I must observe that I thought the website was abondoned.
There are broken links, ASP failures, SQL errors on databases lookups,
annoucments for dates that have past, the 520 specifications has been wrong
for a long as I can remember, and there does not appears to be any new
content added in a while. What are the intentions of this website. I'd
love to see this website become a great source for Aero Commander
information, such as manuals, photos, stories, advice, service bulletins,
checklists, etc.
Todd Trainor, PMP
Project Manager
HP C&I Storage
810-225-4929
href="http://www.matronics.com/contribution">http://www.matronics.com/chref
"http://www.matronics.com/Navigator?Commander-List">http://www.matronics.com
/Navigator?Commander-List
href="http://forums.matronics.com">http://forums.matronics.com
Message 6
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | www.aerocommander.com |
Hi Barry,
Next year is fine, thanks. :-D
You can do it in HTML, or pure text if you wish. I'll set the font, size and
color in the style sheets. If there are tables of information, doing it in
HTML with tables already laid out will save me a boat-load of time, but if
you don't have the time to get it laid out, I'll have someone sit down and
do it.
I just received my newsletter. It's very nicely done and I sat down and read
the whole thing.
Thanks Jim.
I noticed that the side-note with the article "What's in a name" mentions
that the brochures from Guillaume Ravery are being scanned up for
publication on the website. That reminded me of the hundreds of articles,
brochures and other stuff that Bert and others have sent, which I scanned up
on one of my sites. That server is now in a locked colocation site and I
cannot get to it and the hosting company doesn't return my calls. It's been
out of commission and inaccesible for more than a month now. So, I am busy
digging through archives and email messagges trying to retrieve all the
material that was sent. As soon as that is complete, I will publish them
onto the website also. Next year... ;- |
I thought I'd just give you guys a heads-up on the situation, which causes
most of the broken links on the website.
Thanks,
Nico
_____
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of Barry
Collman
Sent: Friday, December 28, 2007 8:08 AM
Subject: Re: Commander-List: www.aerocommander.com
Hi Nico,
I will get the correct Specs to you, but will need a little time.
I may not be able to get round to doing it until next year ;-)
Let me know what format you want the data in, plus font and size etc.
Best Regards,
Barry
----- Original Message -----
From: nico <mailto:nico@cybersuperstore.com> css
Sent: Friday, December 28, 2007 3:16 PM
Subject: RE: Commander-List: www.aerocommander.com
You guys are, of course, absolutely right. Sorry about that. I think I asked
for specs for the other models at the time when I built out the scope of the
models but when nothing was forthcoming (I am not pointing fingers here) it
went out of mind. Without specs for some models I merely duplicated the
specs of what I had to 'fill' the pages but it was not meant for it to
remain so for that long. I added the jets and singles onto the site as well.
I will post new and updated specs if someone would furnish them. It is in
the plan also that the site's design be altered to make it fit the viewer's
browser so that content can be more productively shown. The models I show
were harvested from all over the 'net and not all of them had the correct
aspect ratio, which explains the distortion on some of them.
The broken links need to be fixed.
Thanks
Nico
_____
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of Barry
Collman
Sent: Friday, December 28, 2007 6:16 AM
Subject: Commander-List: www.aerocommander.com
Hi Todd,
I haven't looked at the "Models" section of the Website and you're
absolutely right, the details given for the Model 520 are totally wrong!
In fact, it looks as though most of the specifications for many of the
Models are wrong, and the Specifications for one Model have been repeated
for other Models. The details shown for the Model 520 are, in fact, those
for the Model 500 and the Model 520 details appear when Model 560 is
selected!
It looks as though when I get the proverbial 5 minutes, I'll have prepare a
new listing for Nico to get the correct details against each of the Models.
Grateful thanks for pointing this out Todd!
Barry Collman
UK CommanderLand Rep.
High Wycombe, England
"Live life on the edge - if you don't take up too much space"
----- Original Message -----
From: Trainor, Todd <mailto:Todd.Trainor@hp.com> (Storage Practice)
Sent: Friday, December 28, 2007 1:47 PM
Subject: RE: Commander-List: Heater installation
I am rather new to this list. The website looks very nice and appears that
it was updated a few years ago. (I've been poking around the site for
years, as one of these days I'm going to own an Aero Commander. I think the
time is soon.) But I must observe that I thought the website was abondoned.
There are broken links, ASP failures, SQL errors on databases lookups,
annoucments for dates that have past, the 520 specifications has been wrong
for a long as I can remember, and there does not appears to be any new
content added in a while. What are the intentions of this website. I'd
love to see this website become a great source for Aero Commander
information, such as manuals, photos, stories, advice, service bulletins,
checklists, etc.
Todd Trainor, PMP
Project Manager
HP C&I Storage
810-225-4929
Message 7
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: www.aerocommander.com |
This reminds me again of how much we profit by the quiet generosity of
others who put together information, newsletters and websites, etc.
Thanks fellas!
----- Original Message -----
From: nico css
To: commander-list@matronics.com
Sent: Friday, December 28, 2007 2:54 PM
Subject: RE: Commander-List: www.aerocommander.com
Hi Barry,
Next year is fine, thanks. :-D
You can do it in HTML, or pure text if you wish. I'll set the font,
size and color in the style sheets. If there are tables of information,
doing it in HTML with tables already laid out will save me a boat-load
of time, but if you don't have the time to get it laid out, I'll have
someone sit down and do it.
I just received my newsletter. It's very nicely done and I sat down
and read the whole thing.
Thanks Jim.
I noticed that the side-note with the article "What's in a name"
mentions that the brochures from Guillaume Ravery are being scanned up
for publication on the website. That reminded me of the hundreds of
articles, brochures and other stuff that Bert and others have sent,
which I scanned up on one of my sites. That server is now in a locked
colocation site and I cannot get to it and the hosting company doesn't
return my calls. It's been out of commission and inaccesible for more
than a month now. So, I am busy digging through archives and email
messagges trying to retrieve all the material that was sent. As soon as
that is complete, I will publish them onto the website also. Next
year... ;- |
I thought I'd just give you guys a heads-up on the situation, which
causes most of the broken links on the website.
Thanks,
Nico
-------------------------------------------------------------------------
-----
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of Barry
Collman
Sent: Friday, December 28, 2007 8:08 AM
To: commander-list@matronics.com
Subject: Re: Commander-List: www.aerocommander.com
Hi Nico,
I will get the correct Specs to you, but will need a little time.
I may not be able to get round to doing it until next year ;-)
Let me know what format you want the data in, plus font and size etc.
Best Regards,
Barry
----- Original Message -----
From: nico css
To: commander-list@matronics.com
Sent: Friday, December 28, 2007 3:16 PM
Subject: RE: Commander-List: www.aerocommander.com
You guys are, of course, absolutely right. Sorry about that. I think
I asked for specs for the other models at the time when I built out the
scope of the models but when nothing was forthcoming (I am not pointing
fingers here) it went out of mind. Without specs for some models I
merely duplicated the specs of what I had to 'fill' the pages but it was
not meant for it to remain so for that long. I added the jets and
singles onto the site as well.
I will post new and updated specs if someone would furnish them. It
is in the plan also that the site's design be altered to make it fit the
viewer's browser so that content can be more productively shown. The
models I show were harvested from all over the 'net and not all of them
had the correct aspect ratio, which explains the distortion on some of
them.
The broken links need to be fixed.
Thanks
Nico
-------------------------------------------------------------------------
---
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of Barry
Collman
Sent: Friday, December 28, 2007 6:16 AM
To: commander-list@matronics.com
Subject: Commander-List: www.aerocommander.com
Hi Todd,
I haven't looked at the "Models" section of the Website and you're
absolutely right, the details given for the Model 520 are totally wrong!
In fact, it looks as though most of the specifications for many of
the Models are wrong, and the Specifications for one Model have been
repeated for other Models. The details shown for the Model 520 are, in
fact, those for the Model 500 and the Model 520 details appear when
Model 560 is selected!
It looks as though when I get the proverbial 5 minutes, I'll have
prepare a new listing for Nico to get the correct details against each
of the Models.
Grateful thanks for pointing this out Todd!
Barry Collman
UK CommanderLand Rep.
High Wycombe, England
"Live life on the edge - if you don't take up too much space"
----- Original Message -----
From: Trainor, Todd (Storage Practice)
To: commander-list@matronics.com
Sent: Friday, December 28, 2007 1:47 PM
Subject: RE: Commander-List: Heater installation
I am rather new to this list. The website looks very nice and
appears that it was updated a few years ago. (I've been poking around
the site for years, as one of these days I'm going to own an Aero
Commander. I think the time is soon.) But I must observe that I
thought the website was abondoned. There are broken links, ASP
failures, SQL errors on databases lookups, annoucments for dates that
have past, the 520 specifications has been wrong for a long as I can
remember, and there does not appears to be any new content added in a
while. What are the intentions of this website. I'd love to see this
website become a great source for Aero Commander information, such as
manuals, photos, stories, advice, service bulletins, checklists, etc.
Todd Trainor, PMP
Project Manager
HP C&I Storage
810-225-4929
href="http://www.matronics.com/contribution">http://www.matronics.com/c
href="http://www.matronics.com/Navigator?Commander-List">http://www.mat
ronics.com/Navigator?Commander-List
href="http://forums.matronics.com">http://forums.matronics.com
Message 8
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: www.aerocommander.com |
Nico,
Let me know when your ready, I'll put a copy of what I have on a thumb drive
and drop it in the mail to you. I can pickup a 4gb thumb drive for almost
nothing.
Bert
(http://food.aol.com/top-rated-recipes?NCID=aoltop00030000000004)
Message 9
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | www.aerocommander.com |
Ok, thanks Bert. I'll let you know what I need.
Nico
_____
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of
BertBerry1@aol.com
Sent: Friday, December 28, 2007 12:37 PM
Subject: Re: Commander-List: www.aerocommander.com
Nico,
Let me know when your ready, I'll put a copy of what I have on a thumb drive
and drop it in the mail to you. I can pickup a 4gb thumb drive for almost
nothing.
Bert
top rated recipes and easy ways to stay in shape
<http://body.aol.com/fitness/winter-exercise?NCID=aoltop00030000000003> for
winter.
Message 10
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | www.aerocommander.com |
Thanks for the kind words, Jim. I had very limited time to spend on anything
else but the essentials, too. There seems to be a stir in the interest,
which is good for the group. We will work with what transpires. It's very
encouraging to see how some folks step up to the plate and get things done.
Thanks, you all. Or should I say y'all. Or even all y'all, since, I believe
the latter is plural. :-)
Nico
_____
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of JTAddington
Sent: Friday, December 28, 2007 8:09 AM
Subject: RE: Commander-List: www.aerocommander.com
Nico, I for one appreciate what you have done even though some of it may not
be right, and that is because we have not given you the support you needed.
Keep up the good work.
Jim Addington
N444BD
500A
_____
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of nico css
Sent: Friday, December 28, 2007 9:17 AM
Subject: RE: Commander-List: www.aerocommander.com
You guys are, of course, absolutely right. Sorry about that. I think I asked
for specs for the other models at the time when I built out the scope of the
models but when nothing was forthcoming (I am not pointing fingers here) it
went out of mind. Without specs for some models I merely duplicated the
specs of what I had to 'fill' the pages but it was not meant for it to
remain so for that long. I added the jets and singles onto the site as well.
I will post new and updated specs if someone would furnish them. It is in
the plan also that the site's design be altered to make it fit the viewer's
browser so that content can be more productively shown. The models I show
were harvested from all over the 'net and not all of them had the correct
aspect ratio, which explains the distortion on some of them.
The broken links need to be fixed.
Thanks
Nico
_____
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of Barry
Collman
Sent: Friday, December 28, 2007 6:16 AM
Subject: Commander-List: www.aerocommander.com
Hi Todd,
I haven't looked at the "Models" section of the Website and you're
absolutely right, the details given for the Model 520 are totally wrong!
In fact, it looks as though most of the specifications for many of the
Models are wrong, and the Specifications for one Model have been repeated
for other Models. The details shown for the Model 520 are, in fact, those
for the Model 500 and the Model 520 details appear when Model 560 is
selected!
It looks as though when I get the proverbial 5 minutes, I'll have prepare a
new listing for Nico to get the correct details against each of the Models.
Grateful thanks for pointing this out Todd!
Barry Collman
UK CommanderLand Rep.
High Wycombe, England
"Live life on the edge - if you don't take up too much space"
----- Original Message -----
From: Trainor, Todd <mailto:Todd.Trainor@hp.com> (Storage Practice)
Sent: Friday, December 28, 2007 1:47 PM
Subject: RE: Commander-List: Heater installation
I am rather new to this list. The website looks very nice and appears that
it was updated a few years ago. (I've been poking around the site for
years, as one of these days I'm going to own an Aero Commander. I think the
time is soon.) But I must observe that I thought the website was abondoned.
There are broken links, ASP failures, SQL errors on databases lookups,
annoucments for dates that have past, the 520 specifications has been wrong
for a long as I can remember, and there does not appears to be any new
content added in a while. What are the intentions of this website. I'd
love to see this website become a great source for Aero Commander
information, such as manuals, photos, stories, advice, service bulletins,
checklists, etc.
Todd Trainor, PMP
Project Manager
HP C&I Storage
810-225-4929
href="http://www.matronics.com/contribution">http://www.matronics.com/chref
"http://www.matronics.com/Navigator?Commander-List">http://www.matronics.com
/Navigator?Commander-List
href="http://forums.matronics.com">http://forums.matronics.com
http://www.matronics.com/contribution
Matt Dralle, List Admin.
http://www.matronics.com/Navigator?Commander-List
http://forums.matronics.com
Message 11
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | www.aerocommander.com |
Nico,
It is good that we are getting you educated on how to say things properly.
Jim A
_____
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of nico css
Sent: Friday, December 28, 2007 3:22 PM
Subject: RE: Commander-List: www.aerocommander.com
Thanks for the kind words, Jim. I had very limited time to spend on anything
else but the essentials, too. There seems to be a stir in the interest,
which is good for the group. We will work with what transpires. It's very
encouraging to see how some folks step up to the plate and get things done.
Thanks, you all. Or should I say y'all. Or even all y'all, since, I believe
the latter is plural. :-)
Nico
_____
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of JTAddington
Sent: Friday, December 28, 2007 8:09 AM
Subject: RE: Commander-List: www.aerocommander.com
Nico, I for one appreciate what you have done even though some of it may not
be right, and that is because we have not given you the support you needed.
Keep up the good work.
Jim Addington
N444BD
500A
_____
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of nico css
Sent: Friday, December 28, 2007 9:17 AM
Subject: RE: Commander-List: www.aerocommander.com
You guys are, of course, absolutely right. Sorry about that. I think I asked
for specs for the other models at the time when I built out the scope of the
models but when nothing was forthcoming (I am not pointing fingers here) it
went out of mind. Without specs for some models I merely duplicated the
specs of what I had to 'fill' the pages but it was not meant for it to
remain so for that long. I added the jets and singles onto the site as well.
I will post new and updated specs if someone would furnish them. It is in
the plan also that the site's design be altered to make it fit the viewer's
browser so that content can be more productively shown. The models I show
were harvested from all over the 'net and not all of them had the correct
aspect ratio, which explains the distortion on some of them.
The broken links need to be fixed.
Thanks
Nico
_____
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of Barry
Collman
Sent: Friday, December 28, 2007 6:16 AM
Subject: Commander-List: www.aerocommander.com
Hi Todd,
I haven't looked at the "Models" section of the Website and you're
absolutely right, the details given for the Model 520 are totally wrong!
In fact, it looks as though most of the specifications for many of the
Models are wrong, and the Specifications for one Model have been repeated
for other Models. The details shown for the Model 520 are, in fact, those
for the Model 500 and the Model 520 details appear when Model 560 is
selected!
It looks as though when I get the proverbial 5 minutes, I'll have prepare a
new listing for Nico to get the correct details against each of the Models.
Grateful thanks for pointing this out Todd!
Barry Collman
UK CommanderLand Rep.
High Wycombe, England
"Live life on the edge - if you don't take up too much space"
----- Original Message -----
From: Trainor, Todd <mailto:Todd.Trainor@hp.com> (Storage Practice)
Sent: Friday, December 28, 2007 1:47 PM
Subject: RE: Commander-List: Heater installation
I am rather new to this list. The website looks very nice and appears that
it was updated a few years ago. (I've been poking around the site for
years, as one of these days I'm going to own an Aero Commander. I think the
time is soon.) But I must observe that I thought the website was abondoned.
There are broken links, ASP failures, SQL errors on databases lookups,
annoucments for dates that have past, the 520 specifications has been wrong
for a long as I can remember, and there does not appears to be any new
content added in a while. What are the intentions of this website. I'd
love to see this website become a great source for Aero Commander
information, such as manuals, photos, stories, advice, service bulletins,
checklists, etc.
Todd Trainor, PMP
Project Manager
HP C&I Storage
810-225-4929
href="http://www.matronics.com/contribution">http://www.matronics.com/chref
"http://www.matronics.com/Navigator?Commander-List">http://www.matronics.com
/Navigator?Commander-List
href="http://forums.matronics.com">http://forums.matronics.com
http://www.matronics.com/contribution
Matt Dralle, List Admin.
http://www.matronics.com/Navigator?Commander-List
http://forums.matronics.com
href="http://www.matronics.com/contribution">http://www.matronics.com/chref
"http://www.matronics.com/Navigator?Commander-List">http://www.matronics.com
/Navigator?Commander-List
href="http://forums.matronics.com">http://forums.matronics.com
Message 12
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: www.aerocommander.com |
Hi Nico,
I'll put something together in a Word .doc file, in tabled format and
keep it to roughly four or five Models per file.
That ought to fit on one page.
Then, when you get the first file you can let me know if it's all OK< or
whether you'd like the info 'tweaked' (a little) or revamped (a lot).
There could well be information that doesn't tie-up with what was there
previously.
In such cases, query them of course, but bear in mind a lot of 'rubbish'
has been previously published over the years and I do have the benefit
of a former Aero Commander Engineer helping me ensure that everything is
right!
I've got a little 'project' to complete, but should be able to get
something to you very early next week.
Best Regards,
Barry
----- Original Message -----
From: nico css
To: commander-list@matronics.com
Sent: Friday, December 28, 2007 7:54 PM
Subject: RE: Commander-List: www.aerocommander.com
Hi Barry,
Next year is fine, thanks. :-D
You can do it in HTML, or pure text if you wish. I'll set the font,
size and color in the style sheets. If there are tables of information,
doing it in HTML with tables already laid out will save me a boat-load
of time, but if you don't have the time to get it laid out, I'll have
someone sit down and do it.
I just received my newsletter. It's very nicely done and I sat down
and read the whole thing.
Thanks Jim.
I noticed that the side-note with the article "What's in a name"
mentions that the brochures from Guillaume Ravery are being scanned up
for publication on the website. That reminded me of the hundreds of
articles, brochures and other stuff that Bert and others have sent,
which I scanned up on one of my sites. That server is now in a locked
colocation site and I cannot get to it and the hosting company doesn't
return my calls. It's been out of commission and inaccesible for more
than a month now. So, I am busy digging through archives and email
messagges trying to retrieve all the material that was sent. As soon as
that is complete, I will publish them onto the website also. Next
year... ;- |
I thought I'd just give you guys a heads-up on the situation, which
causes most of the broken links on the website.
Thanks,
Nico
-------------------------------------------------------------------------
-----
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of Barry
Collman
Sent: Friday, December 28, 2007 8:08 AM
To: commander-list@matronics.com
Subject: Re: Commander-List: www.aerocommander.com
Hi Nico,
I will get the correct Specs to you, but will need a little time.
I may not be able to get round to doing it until next year ;-)
Let me know what format you want the data in, plus font and size etc.
Best Regards,
Barry
----- Original Message -----
From: nico css
To: commander-list@matronics.com
Sent: Friday, December 28, 2007 3:16 PM
Subject: RE: Commander-List: www.aerocommander.com
You guys are, of course, absolutely right. Sorry about that. I think
I asked for specs for the other models at the time when I built out the
scope of the models but when nothing was forthcoming (I am not pointing
fingers here) it went out of mind. Without specs for some models I
merely duplicated the specs of what I had to 'fill' the pages but it was
not meant for it to remain so for that long. I added the jets and
singles onto the site as well.
I will post new and updated specs if someone would furnish them. It
is in the plan also that the site's design be altered to make it fit the
viewer's browser so that content can be more productively shown. The
models I show were harvested from all over the 'net and not all of them
had the correct aspect ratio, which explains the distortion on some of
them.
The broken links need to be fixed.
Thanks
Nico
-------------------------------------------------------------------------
---
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of Barry
Collman
Sent: Friday, December 28, 2007 6:16 AM
To: commander-list@matronics.com
Subject: Commander-List: www.aerocommander.com
Hi Todd,
I haven't looked at the "Models" section of the Website and you're
absolutely right, the details given for the Model 520 are totally wrong!
In fact, it looks as though most of the specifications for many of
the Models are wrong, and the Specifications for one Model have been
repeated for other Models. The details shown for the Model 520 are, in
fact, those for the Model 500 and the Model 520 details appear when
Model 560 is selected!
It looks as though when I get the proverbial 5 minutes, I'll have
prepare a new listing for Nico to get the correct details against each
of the Models.
Grateful thanks for pointing this out Todd!
Barry Collman
UK CommanderLand Rep.
High Wycombe, England
"Live life on the edge - if you don't take up too much space"
----- Original Message -----
From: Trainor, Todd (Storage Practice)
To: commander-list@matronics.com
Sent: Friday, December 28, 2007 1:47 PM
Subject: RE: Commander-List: Heater installation
I am rather new to this list. The website looks very nice and
appears that it was updated a few years ago. (I've been poking around
the site for years, as one of these days I'm going to own an Aero
Commander. I think the time is soon.) But I must observe that I
thought the website was abondoned. There are broken links, ASP
failures, SQL errors on databases lookups, annoucments for dates that
have past, the 520 specifications has been wrong for a long as I can
remember, and there does not appears to be any new content added in a
while. What are the intentions of this website. I'd love to see this
website become a great source for Aero Commander information, such as
manuals, photos, stories, advice, service bulletins, checklists, etc.
Todd Trainor, PMP
Project Manager
HP C&I Storage
810-225-4929
href="http://www.matronics.com/contribution">http://www.matronics.com/c
href="http://www.matronics.com/Navigator?Commander-List">http://www.mat
ronics.com/Navigator?Commander-List
href="http://forums.matronics.com">http://forums.matronics.com
Message 13
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | www.aerocommander.com |
I learn fast when slapping around comes with the territory.
:-)
_____
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of JTAddington
Sent: Friday, December 28, 2007 1:44 PM
Subject: RE: Commander-List: www.aerocommander.com
Nico,
It is good that we are getting you educated on how to say things properly.
Jim A
_____
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of nico css
Sent: Friday, December 28, 2007 3:22 PM
Subject: RE: Commander-List: www.aerocommander.com
Thanks for the kind words, Jim. I had very limited time to spend on anything
else but the essentials, too. There seems to be a stir in the interest,
which is good for the group. We will work with what transpires. It's very
encouraging to see how some folks step up to the plate and get things done.
Thanks, you all. Or should I say y'all. Or even all y'all, since, I believe
the latter is plural. :-)
Nico
_____
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of JTAddington
Sent: Friday, December 28, 2007 8:09 AM
Subject: RE: Commander-List: www.aerocommander.com
Nico, I for one appreciate what you have done even though some of it may not
be right, and that is because we have not given you the support you needed.
Keep up the good work.
Jim Addington
N444BD
500A
_____
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of nico css
Sent: Friday, December 28, 2007 9:17 AM
Subject: RE: Commander-List: www.aerocommander.com
You guys are, of course, absolutely right. Sorry about that. I think I asked
for specs for the other models at the time when I built out the scope of the
models but when nothing was forthcoming (I am not pointing fingers here) it
went out of mind. Without specs for some models I merely duplicated the
specs of what I had to 'fill' the pages but it was not meant for it to
remain so for that long. I added the jets and singles onto the site as well.
I will post new and updated specs if someone would furnish them. It is in
the plan also that the site's design be altered to make it fit the viewer's
browser so that content can be more productively shown. The models I show
were harvested from all over the 'net and not all of them had the correct
aspect ratio, which explains the distortion on some of them.
The broken links need to be fixed.
Thanks
Nico
_____
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of Barry
Collman
Sent: Friday, December 28, 2007 6:16 AM
Subject: Commander-List: www.aerocommander.com
Hi Todd,
I haven't looked at the "Models" section of the Website and you're
absolutely right, the details given for the Model 520 are totally wrong!
In fact, it looks as though most of the specifications for many of the
Models are wrong, and the Specifications for one Model have been repeated
for other Models. The details shown for the Model 520 are, in fact, those
for the Model 500 and the Model 520 details appear when Model 560 is
selected!
It looks as though when I get the proverbial 5 minutes, I'll have prepare a
new listing for Nico to get the correct details against each of the Models.
Grateful thanks for pointing this out Todd!
Barry Collman
UK CommanderLand Rep.
High Wycombe, England
"Live life on the edge - if you don't take up too much space"
----- Original Message -----
From: Trainor, Todd <mailto:Todd.Trainor@hp.com> (Storage Practice)
Sent: Friday, December 28, 2007 1:47 PM
Subject: RE: Commander-List: Heater installation
I am rather new to this list. The website looks very nice and appears that
it was updated a few years ago. (I've been poking around the site for
years, as one of these days I'm going to own an Aero Commander. I think the
time is soon.) But I must observe that I thought the website was abondoned.
There are broken links, ASP failures, SQL errors on databases lookups,
annoucments for dates that have past, the 520 specifications has been wrong
for a long as I can remember, and there does not appears to be any new
content added in a while. What are the intentions of this website. I'd
love to see this website become a great source for Aero Commander
information, such as manuals, photos, stories, advice, service bulletins,
checklists, etc.
Todd Trainor, PMP
Project Manager
HP C&I Storage
810-225-4929
href="http://www.matronics.com/contribution">http://www.matronics.com/chref
"http://www.matronics.com/Navigator?Commander-List">http://www.matronics.com
/Navigator?Commander-List
href="http://forums.matronics.com">http://forums.matronics.com
Dralle, List Admin.
http://www.matronics.com/Navigator?Commander-List
http://forums.matronics.com
href="http://www.matronics.com/contribution">http://www.matronics.com/chref
"http://www.matronics.com/Navigator?Commander-List">http://www.matronics.com
/Navigator?Commander-List
href="http://forums.matronics.com">http://forums.matronics.com
http://www.matronics.com/contribution
Matt Dralle, List Admin.
http://www.matronics.com/Navigator?Commander-List
http://forums.matronics.com
Message 14
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | www.aerocommander.com |
That would be fine, Bary. Thanks.
_____
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of Barry
Collman
Sent: Friday, December 28, 2007 2:14 PM
Subject: Re: Commander-List: www.aerocommander.com
Hi Nico,
I'll put something together in a Word .doc file, in tabled format and keep
it to roughly four or five Models per file.
That ought to fit on one page.
Then, when you get the first file you can let me know if it's all OK< or
whether you'd like the info 'tweaked' (a little) or revamped (a lot).
There could well be information that doesn't tie-up with what was there
previously.
In such cases, query them of course, but bear in mind a lot of 'rubbish' has
been previously published over the years and I do have the benefit of a
former Aero Commander Engineer helping me ensure that everything is right!
I've got a little 'project' to complete, but should be able to get something
to you very early next week.
Best Regards,
Barry
----- Original Message -----
From: nico <mailto:nico@cybersuperstore.com> css
Sent: Friday, December 28, 2007 7:54 PM
Subject: RE: Commander-List: www.aerocommander.com
Hi Barry,
Next year is fine, thanks. :-D
You can do it in HTML, or pure text if you wish. I'll set the font, size and
color in the style sheets. If there are tables of information, doing it in
HTML with tables already laid out will save me a boat-load of time, but if
you don't have the time to get it laid out, I'll have someone sit down and
do it.
I just received my newsletter. It's very nicely done and I sat down and read
the whole thing.
Thanks Jim.
I noticed that the side-note with the article "What's in a name" mentions
that the brochures from Guillaume Ravery are being scanned up for
publication on the website. That reminded me of the hundreds of articles,
brochures and other stuff that Bert and others have sent, which I scanned up
on one of my sites. That server is now in a locked colocation site and I
cannot get to it and the hosting company doesn't return my calls. It's been
out of commission and inaccesible for more than a month now. So, I am busy
digging through archives and email messagges trying to retrieve all the
material that was sent. As soon as that is complete, I will publish them
onto the website also. Next year... ;- |
I thought I'd just give you guys a heads-up on the situation, which causes
most of the broken links on the website.
Thanks,
Nico
_____
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of Barry
Collman
Sent: Friday, December 28, 2007 8:08 AM
Subject: Re: Commander-List: www.aerocommander.com
Hi Nico,
I will get the correct Specs to you, but will need a little time.
I may not be able to get round to doing it until next year ;-)
Let me know what format you want the data in, plus font and size etc.
Best Regards,
Barry
----- Original Message -----
From: nico css <mailto:nico@cybersuperstore.com>
Sent: Friday, December 28, 2007 3:16 PM
Subject: RE: Commander-List: www.aerocommander.com
You guys are, of course, absolutely right. Sorry about that. I think I asked
for specs for the other models at the time when I built out the scope of the
models but when nothing was forthcoming (I am not pointing fingers here) it
went out of mind. Without specs for some models I merely duplicated the
specs of what I had to 'fill' the pages but it was not meant for it to
remain so for that long. I added the jets and singles onto the site as well.
I will post new and updated specs if someone would furnish them. It is in
the plan also that the site's design be altered to make it fit the viewer's
browser so that content can be more productively shown. The models I show
were harvested from all over the 'net and not all of them had the correct
aspect ratio, which explains the distortion on some of them.
The broken links need to be fixed.
Thanks
Nico
_____
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of Barry
Collman
Sent: Friday, December 28, 2007 6:16 AM
Subject: Commander-List: www.aerocommander.com
Hi Todd,
I haven't looked at the "Models" section of the Website and you're
absolutely right, the details given for the Model 520 are totally wrong!
In fact, it looks as though most of the specifications for many of the
Models are wrong, and the Specifications for one Model have been repeated
for other Models. The details shown for the Model 520 are, in fact, those
for the Model 500 and the Model 520 details appear when Model 560 is
selected!
It looks as though when I get the proverbial 5 minutes, I'll have prepare a
new listing for Nico to get the correct details against each of the Models.
Grateful thanks for pointing this out Todd!
Barry Collman
UK CommanderLand Rep.
High Wycombe, England
"Live life on the edge - if you don't take up too much space"
----- Original Message -----
From: Trainor, <mailto:Todd.Trainor@hp.com> Todd (Storage Practice)
Sent: Friday, December 28, 2007 1:47 PM
Subject: RE: Commander-List: Heater installation
I am rather new to this list. The website looks very nice and appears that
it was updated a few years ago. (I've been poking around the site for
years, as one of these days I'm going to own an Aero Commander. I think the
time is soon.) But I must observe that I thought the website was abondoned.
There are broken links, ASP failures, SQL errors on databases lookups,
annoucments for dates that have past, the 520 specifications has been wrong
for a long as I can remember, and there does not appears to be any new
content added in a while. What are the intentions of this website. I'd
love to see this website become a great source for Aero Commander
information, such as manuals, photos, stories, advice, service bulletins,
checklists, etc.
Todd Trainor, PMP
Project Manager
HP C&I Storage
810-225-4929
href="http://www.matronics.com/contribution">http://www.matronics.com/chref
"http://www.matronics.com/Navigator?Commander-List">http://www.matronics.com
/Navigator?Commander-List
href="http://forums.matronics.com">http://forums.matronics.com
href="http://www.matronics.com/contribution">http://www.matronics.com/chref
"http://www.matronics.com/Navigator?Commander-List">http://www.matronics.com
/Navigator?Commander-List
href="http://forums.matronics.com">http://forums.matronics.com
Message 15
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | www.aerocommander.com |
Good! Now if we can just educate Barry to speak properly. Ha ha.
Jim A
_____
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of nico css
Sent: Friday, December 28, 2007 6:37 PM
Subject: RE: Commander-List: www.aerocommander.com
I learn fast when slapping around comes with the territory.
:-)
_____
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of JTAddington
Sent: Friday, December 28, 2007 1:44 PM
Subject: RE: Commander-List: www.aerocommander.com
Nico,
It is good that we are getting you educated on how to say things properly.
Jim A
_____
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of nico css
Sent: Friday, December 28, 2007 3:22 PM
Subject: RE: Commander-List: www.aerocommander.com
Thanks for the kind words, Jim. I had very limited time to spend on anything
else but the essentials, too. There seems to be a stir in the interest,
which is good for the group. We will work with what transpires. It's very
encouraging to see how some folks step up to the plate and get things done.
Thanks, you all. Or should I say y'all. Or even all y'all, since, I believe
the latter is plural. :-)
Nico
_____
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of JTAddington
Sent: Friday, December 28, 2007 8:09 AM
Subject: RE: Commander-List: www.aerocommander.com
Nico, I for one appreciate what you have done even though some of it may not
be right, and that is because we have not given you the support you needed.
Keep up the good work.
Jim Addington
N444BD
500A
_____
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of nico css
Sent: Friday, December 28, 2007 9:17 AM
Subject: RE: Commander-List: www.aerocommander.com
You guys are, of course, absolutely right. Sorry about that. I think I asked
for specs for the other models at the time when I built out the scope of the
models but when nothing was forthcoming (I am not pointing fingers here) it
went out of mind. Without specs for some models I merely duplicated the
specs of what I had to 'fill' the pages but it was not meant for it to
remain so for that long. I added the jets and singles onto the site as well.
I will post new and updated specs if someone would furnish them. It is in
the plan also that the site's design be altered to make it fit the viewer's
browser so that content can be more productively shown. The models I show
were harvested from all over the 'net and not all of them had the correct
aspect ratio, which explains the distortion on some of them.
The broken links need to be fixed.
Thanks
Nico
_____
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of Barry
Collman
Sent: Friday, December 28, 2007 6:16 AM
Subject: Commander-List: www.aerocommander.com
Hi Todd,
I haven't looked at the "Models" section of the Website and you're
absolutely right, the details given for the Model 520 are totally wrong!
In fact, it looks as though most of the specifications for many of the
Models are wrong, and the Specifications for one Model have been repeated
for other Models. The details shown for the Model 520 are, in fact, those
for the Model 500 and the Model 520 details appear when Model 560 is
selected!
It looks as though when I get the proverbial 5 minutes, I'll have prepare a
new listing for Nico to get the correct details against each of the Models.
Grateful thanks for pointing this out Todd!
Barry Collman
UK CommanderLand Rep.
High Wycombe, England
"Live life on the edge - if you don't take up too much space"
----- Original Message -----
From: Trainor, Todd <mailto:Todd.Trainor@hp.com> (Storage Practice)
Sent: Friday, December 28, 2007 1:47 PM
Subject: RE: Commander-List: Heater installation
I am rather new to this list. The website looks very nice and appears that
it was updated a few years ago. (I've been poking around the site for
years, as one of these days I'm going to own an Aero Commander. I think the
time is soon.) But I must observe that I thought the website was abondoned.
There are broken links, ASP failures, SQL errors on databases lookups,
annoucments for dates that have past, the 520 specifications has been wrong
for a long as I can remember, and there does not appears to be any new
content added in a while. What are the intentions of this website. I'd
love to see this website become a great source for Aero Commander
information, such as manuals, photos, stories, advice, service bulletins,
checklists, etc.
Todd Trainor, PMP
Project Manager
HP C&I Storage
810-225-4929
href="http://www.matronics.com/contribution">http://www.matronics.com/chref
"http://www.matronics.com/Navigator?Commander-List">http://www.matronics.com
/Navigator?Commander-List
href="http://forums.matronics.com">http://forums.matronics.com
Dralle, List Admin.
http://www.matronics.com/Navigator?Commander-List
http://forums.matronics.com
href="http://www.matronics.com/contribution">http://www.matronics.com/chref
"http://www.matronics.com/Navigator?Commander-List">http://www.matronics.com
/Navigator?Commander-List
href="http://forums.matronics.com">http://forums.matronics.com
http://www.matronics.com/contribution
Matt Dralle, List Admin.
http://www.matronics.com/Navigator?Commander-List
http://forums.matronics.com
href="http://www.matronics.com/contribution">http://www.matronics.com/chref
"http://www.matronics.com/Navigator?Commander-List">http://www.matronics.com
/Navigator?Commander-List
href="http://forums.matronics.com">http://forums.matronics.com
Message 16
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: www.aerocommander.com |
THANKS "SIR" BARRY!!? jb
It looks as though when I get the proverbial 5 minutes, I'll have prepare a new
listing for Nico to get the correct details against each of the Models
-----Original Message-----
From: Barry Collman <barry.collman@air-britain.co.uk>
Sent: Fri, 28 Dec 2007 6:16 am
Subject: Commander-List: www.aerocommander.com
Hi Todd,
?
I haven't looked at the "Models" section of the Website and you're absolutely right,
the details given for the Model 520 are totally wrong!
?
In fact, it looks as though most of the specifications for many of the Models are
wrong, and the Specifications for one Model have been repeated for other Models.
The details shown for the Model 520 are, in fact, those for the Model 500
and the Model 520 details appear when Model 560 is selected!
?
It looks as though when I get the proverbial 5 minutes, I'll have prepare a new
listing for Nico to get the correct details against each of the Models.
?
Grateful thanks for pointing this out Todd!
?
Barry Collman
UK CommanderLand Rep.
High Wycombe, England
"Live life on the edge - if you don't take up too much space"
?
----- Original Message -----
From: Trainor, Todd (Storage Practice)
Sent: Friday, December 28, 2007 1:47 PM
Subject: RE: Commander-List: Heater installation
I am rather new to this list.? The website looks very nice and appears that it
was updated a few years ago.? (I've been poking around the site for years, as
one of these days I'm going to own an Aero Commander.? I think the time is soon.)?
But?I must observe that I thought the website was?abondoned.??There are broken
links, ASP?failures,?SQL errors on databases lookups, annoucments for dates
that have past, the 520 specifications has been wrong for a long as I can
remember, and there does not appears to be any new content added in a while.??
What are the intentions of this website.? I'd love to see this website become?a?great
source?for?Aero Commander?information, such as manuals, photos, stories,
advice,?service bulletins, checklists,?etc.?
?
Todd Trainor, PMP
Project Manager
HP C&I Storage
810-225-4929
________________________________________________________________________
Message 17
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: www.aerocommander.com |
AMEN, AMEN!!? Thanks Nico!! jb
Nico, I for one appreciate what you have done
-----Original Message-----
From: JTAddington <jtaddington@verizon.net>
Sent: Fri, 28 Dec 2007 8:08 am
Subject: RE: Commander-List: www.aerocommander.com
Nico, I for one appreciate what you have done even though some of it may not be
right, and that is because we have not given you the support you needed.
Keep up the good work.
Jim Addington
N444BD
500A
?
From: owner-commander-list-server@matronics.com [mailto:owner-commander-list-server@matronics.com] On Behalf Of nico css
Sent: Friday, December 28, 2007 9:17 AM
Subject: RE: Commander-List: www.aerocommander.com
?
You guys are, of course, absolutely right. Sorry about that. I think I asked for
specs for the other models at the time when I built out the scope of the models
but when nothing was forthcoming (I am not pointing fingers here) it went
out of mind. Without specs for some models I merely duplicated the specs of what
I had to 'fill' the pages but it was not meant for it to remain so for that
long. I added the jets and singles onto the site as well.
?
I will post new and updated specs if someone would furnish them. It is in the plan
also that the site's design be altered to make it fit the viewer's browser
so that content can be more productively shown. The models I show were harvested
from all over the 'net and not all of them had the correct aspect ratio, which
explains the distortion on some of them.
?
The broken links need to be fixed.
?
Thanks
?
Nico
?
?
?
From: owner-commander-list-server@matronics.com [mailto:owner-commander-list-server@matronics.com] On Behalf Of Barry Collman
Sent: Friday, December 28, 2007 6:16 AM
Subject: Commander-List: www.aerocommander.com
Hi Todd,
?
I haven't looked at the "Models" section of the Website and you're absolutely right,
the details given for the Model 520 are totally wrong!
?
In fact, it looks as though most of the specifications for many of the Models are
wrong, and the Specifications for one Model have been repeated for other Models.
The details shown for the Model 520 are, in fact, those for the Model 500
and the Model 520 details appear when Model 560 is selected!
?
It looks as though when I get the proverbial 5 minutes, I'll have prepare a new
listing for Nico to get the correct details against each of the Models.
?
Grateful thanks for pointing this out Todd!
?
Barry Collman
UK CommanderLand Rep.
High Wycombe, England
"Live life on the edge - if you don't take up too much space"
?
----- Original Message -----
From: Trainor, Todd (Storage Practice)
Sent: Friday, December 28, 2007 1:47 PM
Subject: RE: Commander-List: Heater installation
?
I am rather new to this list.? The website looks very nice and appears that it
was updated a few years ago.? (I've been poking around the site for years, as
one of these days I'm going to own an Aero Commander.? I think the time is soon.)?
But?I must observe that I thought the website was?abondoned.??There are broken
links, ASP?failures,?SQL errors on databases lookups, annoucments for dates
that have past, the 520 specifications has been wrong for a long as I can
remember, and there does not appears to be any new content added in a while.??
What are the intentions of this website.? I'd love to see this website become?a?great
source?for?Aero Commander?information, such as manuals, photos, stories,
advice,?service bulletins, checklists,?etc.?
?
Todd Trainor, PMP
Project Manager
HP C&I Storage
810-225-4929
?
?
href="http://www.matronics.com/contribution">http://www.matronics.com/chref="http://www.matronics.com/Navigator?Commander-List">http://www.matronics.com/Navigator?Commander-List
href="http://forums.matronics.com">http://forums.matronics.com
?
?
?
http://www.matronics.com/contribution
Matt Dralle, List Admin.
http://www.matronics.com/Navigator?Commander-List
http://forums.matronics.com
?
http://www.matronics.com/contribution
Matt Dralle, List Admin.
http://www.matronics.com/Navigator?Commander-List
http://forums.matronics.com
?
________________________________________________________________________
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|