---------------------------------------------------------- Commander-List Digest Archive --- Total Messages Posted Sun 01/06/08: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 08:13 PM - Re: Commander Heater Photos (Moe - Ross Racing Pistons) 2. 08:16 PM - Re: Commander Heater Photos (Moe - Ross Racing Pistons) 3. 08:35 PM - Re: Commander Heater Photos (John Vormbaum) 4. 09:47 PM - Re: Commander Heater Photos (Tom Fisher) ________________________________ Message 1 _____________________________________ Time: 08:13:39 PM PST US From: "Moe - Ross Racing Pistons" Subject: RE: Commander-List: Commander Heater Photos Hi Tom, Please excuse me for being so slow to reply, however, I retired at the end of the year and have experienced a few email problems while moving from the Ross office to my new private hobby shop office. If it will help you, I can scan the pages from the Commander book which show a pretty good diagram of how the system works. Please advise if you need them. Moe -----Original Message----- From: owner-commander-list-server@matronics.com [mailto:owner-commander-list-server@matronics.com] On Behalf Of Tom Fisher Sent: Wednesday, January 02, 2008 7:01 AM Subject: Re: Commander-List: Commander Heater Photos --> Thanks Moe, the images turned out great, If you also have any showing the routing of all the air ducts then we can figure out what we can pull out in the way of old plumbing and components related to the pressurization and air conditioning both of which I no longer have. Tom. C-GISS ----- Original Message ----- From: "Moe - Ross Racing Pistons" Sent: Tuesday, January 01, 2008 11:57 AM Subject: Commander-List: Commander Heater Photos > > Sorry these are so late. N680RR was locked in the hanger where the annual > is being done. > > Moe > > DSCN1105 > DSCN1100 > DSCN1101 > DSCN1102 > DSCN1103 > DSCN1104 > > > ________________________________ Message 2 _____________________________________ Time: 08:16:58 PM PST US From: "Moe - Ross Racing Pistons" Subject: RE: Commander-List: Commander Heater Photos Mason, A little over $ 3,000.00 as I recall, which is less than the fuel bill to Micxhigan from Hawthorne, CA. Regards, Moe _____ From: owner-commander-list-server@matronics.com [mailto:owner-commander-list-server@matronics.com] On Behalf Of MASON CHEVAILLIER Sent: Tuesday, January 01, 2008 3:51 PM Subject: Re: Commander-List: Commander Heater Photos mm, appox how much $ was the conversion? gmc ----- Original Message ----- From: Moe - Ross Racing Pistons Sent: Tuesday, January 01, 2008 1:57 PM Subject: Commander-List: Commander Heater Photos Sorry these are so late. N680RR was locked in the hanger where the annual is being done. Moe DSCN1105 DSCN1100 DSCN1101 DSCN1102 DSCN1103 DSCN1104 ________________________________ Message 3 _____________________________________ Time: 08:35:24 PM PST US From: John Vormbaum Subject: Re: Commander-List: Commander Heater Photos Moe, congrats on your retirement! Will you have a phone, or will we still have to tell the sentry that we're "from the airport" if we want to talk to you? :-) /John Moe - Ross Racing Pistons wrote: > > Hi Tom, > > Please excuse me for being so slow to reply, however, I retired at the end > of the year and have experienced a few email problems while moving from the > Ross office to my new private hobby shop office. > > If it will help you, I can scan the pages from the > Commander book which show a pretty good diagram of how the system works. > Please advise if you need them. > > Moe > > -----Original Message----- > From: owner-commander-list-server@matronics.com > [mailto:owner-commander-list-server@matronics.com] On Behalf Of Tom Fisher > Sent: Wednesday, January 02, 2008 7:01 AM > To: commander-list@matronics.com > Subject: Re: Commander-List: Commander Heater Photos > > --> > > Thanks Moe, the images turned out great, If you also have any showing the > routing of all the air ducts then we can figure out what we can pull out in > the way of old plumbing and components related to the pressurization and air > conditioning both of which I no longer have. > Tom. > C-GISS > > ----- Original Message ----- > From: "Moe - Ross Racing Pistons" > To: > Sent: Tuesday, January 01, 2008 11:57 AM > Subject: Commander-List: Commander Heater Photos > > > >> Sorry these are so late. N680RR was locked in the hanger where the annual >> is being done. >> >> Moe >> >> DSCN1105 >> DSCN1100 >> DSCN1101 >> DSCN1102 >> DSCN1103 >> DSCN1104 >> >> >> >> > > > ________________________________ Message 4 _____________________________________ Time: 09:47:10 PM PST US From: "Tom Fisher" Subject: Re: Commander-List: Commander Heater Photos Thanks for the offer, I have the commander books but they don't show me what a modified system might be set up like as I have the Mr. RPM conversion without the air conditioning or pressurization. So if someone with that configuration could take images. I do not have the scoop on top of the aircraft, should I? I have no idea. Tom. ----- Original Message ----- From: "Moe - Ross Racing Pistons" Sent: Sunday, January 06, 2008 8:12 PM Subject: RE: Commander-List: Commander Heater Photos > > > Hi Tom, > > Please excuse me for being so slow to reply, however, I retired at the end > of the year and have experienced a few email problems while moving from > the > Ross office to my new private hobby shop office. > > If it will help you, I can scan the pages from the > Commander book which show a pretty good diagram of how the system works. > Please advise if you need them. > > Moe > > -----Original Message----- > From: owner-commander-list-server@matronics.com > [mailto:owner-commander-list-server@matronics.com] On Behalf Of Tom Fisher > Sent: Wednesday, January 02, 2008 7:01 AM > To: commander-list@matronics.com > Subject: Re: Commander-List: Commander Heater Photos > > --> > > Thanks Moe, the images turned out great, If you also have any showing the > routing of all the air ducts then we can figure out what we can pull out > in > the way of old plumbing and components related to the pressurization and > air > conditioning both of which I no longer have. > Tom. > C-GISS > > ----- Original Message ----- > From: "Moe - Ross Racing Pistons" > To: > Sent: Tuesday, January 01, 2008 11:57 AM > Subject: Commander-List: Commander Heater Photos > > >> >> Sorry these are so late. N680RR was locked in the hanger where the >> annual >> is being done. >> >> Moe >> >> DSCN1105 >> DSCN1100 >> DSCN1101 >> DSCN1102 >> DSCN1103 >> DSCN1104 >> >> >> > > > ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message commander-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Commander-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/commander-list Browse Digests http://www.matronics.com/digest/commander-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.