---------------------------------------------------------- Commander-List Digest Archive --- Total Messages Posted Sat 06/07/08: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:54 AM - Re: Subscriptions (N395V) 2. 10:23 AM - Re: Fly in (Deneal Schilmeister (iMac)) 3. 11:02 AM - Re: Fly in (Barry Collman) 4. 12:03 PM - Parts (N560WM@aol.com) 5. 05:33 PM - Re: SB-90C (Tylor Hall) 6. 06:31 PM - Re: SB-90C (nico css) 7. 06:34 PM - Re: SB-90C (Chris) ________________________________ Message 1 _____________________________________ Time: 05:54:35 AM PST US Subject: Commander-List: Re: Subscriptions From: "N395V" Nico, Thats because when you signed up it was just an e mail list. Quite some time ago Matt sent out a form to sign up as a bulletin board. > Why do I need to register at all? > You may not have to -- it is up to the administrator of the board as to whether you need to register in order to post messages. However, registration will give you access to additional features not available to guest users such as definable avatar images, private messaging, emailing to fellow users, usergroup subscription, etc. It only takes a few minutes to register so it is recommended you do so. > -------- Milt 2003 F1 Rocket 2006 Radial Rocket Read this topic online here: http://forums.matronics.com/viewtopic.php?p=186651#186651 ________________________________ Message 2 _____________________________________ Time: 10:23:55 AM PST US Subject: Re: Commander-List: Fly in From: "Deneal Schilmeister (iMac)" On 6/6/08 7:08 PM, "nico css" wrote: > I added a link to "Wiley Post" airport in the news flash. As more informa tion > becomes available, I'll add them in. > Thanks > Nico For those of us who don=B9t check in here that often, what again is the url for this motherload of Commanderdom? Thanks DS ________________________________ Message 3 _____________________________________ Time: 11:02:33 AM PST US From: "Barry Collman" Subject: Re: Commander-List: Fly in Re: Commander-List: Fly inHi Deneal, It's: http://www.aerocommander.com/index2.asp Best Regards, Barry ----- Original Message ----- From: Deneal Schilmeister (iMac) To: commander-list@matronics.com Sent: Saturday, June 07, 2008 6:21 PM Subject: Re: Commander-List: Fly in On 6/6/08 7:08 PM, "nico css" wrote: I added a link to "Wiley Post" airport in the news flash. As more information becomes available, I'll add them in. Thanks Nico For those of us who don't check in here that often, what again is the url for this motherload of Commanderdom? Thanks DS ________________________________ Message 4 _____________________________________ Time: 12:03:31 PM PST US From: N560WM@aol.com Subject: Commander-List: Parts Anyone knows where I can get ( support) nose wheel part 5310054-45 made of stainless steel the old ones are aluminum, want to replace both. Andy **************Get trade secrets for amazing burgers. Watch "Cooking with Tyler Florence" on AOL Food. (http://food.aol.com/tyler-florence?video=4?&NCID=aolfod00030000000002) ________________________________ Message 5 _____________________________________ Time: 05:33:53 PM PST US From: Tylor Hall Subject: Re: Commander-List: SB-90C Nico, The web site is not coming up? Chris, you make a good point about having the AD's on the web site or the links to the FAA web site. This is a resource that we need to have reference to. Tylor On Jun 6, 2008, at 6:45 PM, Chris wrote: > > Ray Mansfield wrote: >> In reading 90C or 90D the SB specifically says to remove the center >> fuel cell to do the inspection. > > Ray, I hate to contradict JB - especially without a copy of 90D in > front of me, but I believe you are correct. I'm almost 100% sure > that you are indeed required to remove the cell to inspect the rear > of the spar. Is 90D available in electronic form anywhere? I'd > sure appreciate it if someone could email me a copy or point me to a > URL so I can refresh some old brain cells. > > Thanks, > Chris > > ________________________________ Message 6 _____________________________________ Time: 06:31:36 PM PST US From: "nico css" Subject: RE: Commander-List: SB-90C I've been in and out of the site several times today and just checked it again - it's coming up fine. Do you have the url correct? www.aerocommander.com should do it. Let me know, Thanks Nico -----Original Message----- From: owner-commander-list-server@matronics.com [mailto:owner-commander-list-server@matronics.com] On Behalf Of Tylor Hall Sent: Saturday, June 07, 2008 5:31 PM Subject: Re: Commander-List: SB-90C --> Nico, The web site is not coming up? Chris, you make a good point about having the AD's on the web site or the links to the FAA web site. This is a resource that we need to have reference to. Tylor On Jun 6, 2008, at 6:45 PM, Chris wrote: > > Ray Mansfield wrote: >> In reading 90C or 90D the SB specifically says to remove the center >> fuel cell to do the inspection. > > Ray, I hate to contradict JB - especially without a copy of 90D in > front of me, but I believe you are correct. I'm almost 100% sure that > you are indeed required to remove the cell to inspect the rear > of the spar. Is 90D available in electronic form anywhere? I'd > sure appreciate it if someone could email me a copy or point me to a > URL so I can refresh some old brain cells. > > Thanks, > Chris > > ________________________________ Message 7 _____________________________________ Time: 06:34:07 PM PST US From: Chris Subject: Re: Commander-List: SB-90C Tylor Hall wrote: > Chris, > you make a good point about having the AD's on the web site or the > links to the FAA web site. > This is a resource that we need to have reference to. I agree absolutely Tylor. Unfortunately, the AD's by themselves are not terribly useful (assuming you can even find them on the atrocity the FAA calls a web site). Many of them just mandate compliance with a SB without including the actual text. The best solution (ie: highest value to Commander owners) would be to place an actual copy of all the SBs and ADs on the Commander web site itself rather than trying to create outside links. Surely Twin Commander could supply the SB's in electronic form??? chris ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message commander-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Commander-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/commander-list Browse Digests http://www.matronics.com/digest/commander-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.