Today's Message Index:
----------------------
1. 06:56 AM - Re: Need a Tach Gage for 680F (Randy Dettmer, AIA)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Need a Tach Gage for 680F |
Thanks for your interest Moe. I have tracked down several gages on ebay and
controller.
Randy
logoRED-126x38@72dpi
Dettmer Architecture
663 Hill Street
San Luis Obispo, CA 93405
805 541 4864 / fax 805 541 4865
www.dettmerarchitecture.com
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of Moe Mills
Sent: Tuesday, April 23, 2013 10:32 PM
Subject: RE: Commander-List: Need a Tach Gage for 680F
Hi Randy,
Didn't mean to bug, just acting upon prior experience. Sorry to say, I
don't have any gages.
Moe
N6800RR
680F(p)
_____
From: rcdettmer@charter.net
Subject: RE: Commander-List: Need a Tach Gage for 680F
Hi Moe,
My mechanics tell me that it is definitely the gage. They checked the tach
generators on both engines and they operate correctly. The needle for the
left engine is sluggish at best and completely inoperative at worst. The
right engine needle is OK.
Randy
logoRED-126x38@72dpi
Dettmer Architecture
663 Hill Street
San Luis Obispo, CA 93405
805 541 4864 / fax 805 541 4865
www.dettmerarchitecture.com
From: owner-commander-list-server@matronics.com
[mailto:owner-commander-list-server@matronics.com] On Behalf Of Moe Mills
Sent: Tuesday, April 23, 2013 2:12 PM
Subject: RE: Commander-List: Need a Tach Gage for 680F
Randy,
Are you absolutely sure that it is the gage and not the sender? I have had
sender problems in the past, but understand that the gages themselves seldom
have problems. Is the problem on both dial hands or only one?
Regards,
Moe Mills
N680RR
680F(p)
_____
From: rcdettmer@charter.net
Subject: Commander-List: Need a Tach Gage for 680F
Hello Commander colleagues,
I am in need of a tach gage for my 680F. The part number of the defective
gage is AN5530-2-12. The Parts Manual calls out a part number of 3850083.
Please contact me for photos of the gage that has come out of the plane.
Hope you can help me out. Thanks.
Randy Dettmer, AIA, NCARB
680F / N6253X
logoRED-126x38@72dpi <http://image001.gif@01CE402E.4DBC4360>
Dettmer Architecture
663 Hill Street
San Luis Obispo, CA 93405
805 541 4864 / fax 805 541 4865
www.dettmerarchitecture.com
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|