Today's Message Index:
----------------------
1. 08:14 AM - Re: Marvel Shebler leak (Sam Hoskins)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Marvel Shebler leak |
What is the history of the carb? Is this carb overhauled, or just the
needle and seat replaced? Was the work done according to the OH manual? Was
the float clearance checked between the pontoons and the bowl?
Was the clearance between the top of the float and the bowl gasket checked?
How about some more info?
Sam Hoskins
Quickie Q-200
Murphysboro, IL
On 5/25/07, Aaron Gustafson <agustafson@chartermi.net> wrote:
>
> I have a carb that even with new needle and seat and new metal float
> still drips for about 2 or 3 minutes after shutdown. I tried releasing the
> pump pressure by draining the sump right away but it still drips just as
> bad. It may be affecting the idle mixture also as it does not shut off the
> engine at lean cut off. Any help?
>
> Aaron Gustafson
>
> *
>
>
> *
>
>
--
Sam Hoskins
www.MistakeProofing.Net
www.MistakeProofing.net/blog/
618-967-0016 ph.
312-212-4086 fax
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|