Today's Message Index:
----------------------
1. 06:18 AM - Low Oil Pressure TSI0-360MB (brianstanley)
2. 10:42 AM - Post Mortem - Matronics List Pummeled By Spam... (Matt Dralle)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Low Oil Pressure TSI0-360MB |
The engine in our Mooney is a TSI0-360MB which was rebuilt about 200
hours ago. Oil pressure was fine at first but it has gradually dropped
over time. Running Phillips XC20-50 multigrade oil we are seeing only
10psig when hot at 2500rpm.
We tried cleaning and resetting the pressure relief valve which made no
difference. The strange thing is when we start from cold the oil
pressure comes up very quickly to just under 100psig and then as the
engine warms up it starts dropping. We have had to switch to a thicker
oil as the turbo wastegate controller requires 30psig to operate. So
using Phillips 25-60 multigrade oil we see a hot operating pressure of
40 psig.
Does anyone have suggestions as to the cause. Could the pressure relief
valve spring weaken when hot and allow oil to bypass? If the turbo
wastegate controller is using an excessive oil flow would this affect
it?
I'm at my wits end what to check next so any help would be most
appreciated.
Thanks
Brian
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Post Mortem - Matronics List Pummeled By Spam... |
Dear Listers,
Over a 3-day period, Thursday 11/8 though Saturday 11/10, the Matronics Lists were
pummeled with over 450,000 spam emails causing posting delays and a few duplicate
messages. Yeah, I really said nearly half a million spams! The good
news is that I don't believe a single one of them actually made it to the Lists
thanks to the aggressive List filtering code and the Barracuda spam filter.
The bad news was that it caused quite a back log of email messages starting Friday
and continuing until late Saturday when I noticed that delivery seemed a bit
sluggish. By about 11pm on Saturday night, I had managed to get the backlog
cleared out of the spam filter by temporarily adjusting some of the filtering.
A check of the queues this morning, and everything looks like its working great
and there are no incoming filtering delays and spam levels appear to be back
to "normal".
There were a number of people asking what was going on, so I thought that I'd send
out a follow up post mortem on the event...
November is the annual List Fund Raiser. Your contribution directly enables me
to buy systems like the Barracuda spam filter that keep the List free of that
garbage. Please make a contribution to support your Lists!
http://www.matronics.com/contribution
Thank you!
Matt Dralle
Matronics Email List Administrator
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|