Today's Message Index:
----------------------
1. 01:44 AM - MS3SPA on an O-200 (Peter W Johnson)
2. 04:14 AM - Re: MS3SPA on an O-200 (GLENN JOHNSON)
3. 05:38 PM - Re: MS3SPA on an O-200 (Peter W Johnson)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | MS3SPA on an O-200 |
Hi Guys,
I am installing an O-200 on a Zenith 601XL. I am having difficulty routing
the mixture cable from the carb to the cockpit.
Presently the lever operates in such a way as to put the oil sump directly
in its way. I think I have the wrong lever on the carb. The number is
155-28. Does anybody know what part # I should have?
Cheers
Peter
Wonthaggi Australia
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | MS3SPA on an O-200 |
Hi Peter
I had to route my mixture for my O-200 from center firewall toward the pass
enger side=2C under the exhaust the then down to the back side of the Marve
l carb. I ended up making a bracket and bolting it to the bolts that suppo
rt the oil sump(not the rings of nuts). I used a "generic" throttle and mi
xture cable and then cut them to length very carefully as these cables can'
t be taken apart as the "locking" mechanism will come apart. Bottom line i
s do not let the cable rub anywhere (I used lots of cable supports) and sec
ure it near the carb so that it will no flex when pushed.
I have to say my plane was easy to buold until I got to the canopy (poor in
struction) and firewall forward (no instruction) especially since I did not
buy a firewall forward kit.
Hope this helps.
Glenn
N676L 601XL Completed
Chesapeake
VA
> From: vk3eka@bigpond.net.au
> To: continental-list@matronics.com
> Subject: Continental-List: MS3SPA on an O-200
> Date: Mon=2C 29 Jun 2009 18:42:34 +1000
>
.net.au>
>
> Hi Guys=2C
>
> I am installing an O-200 on a Zenith 601XL. I am having difficulty routin
g
> the mixture cable from the carb to the cockpit.
>
> Presently the lever operates in such a way as to put the oil sump directl
y
> in its way. I think I have the wrong lever on the carb. The number is
> 155-28. Does anybody know what part # I should have?
>
> Cheers
>
> Peter
> Wonthaggi Australia
>
>
>
>
===========
===========
===========
===========
>
>
>
_________________________________________________________________
Hotmail=AE has ever-growing storage! Don=92t worry about storage limits.
http://windowslive.com/Tutorial/Hotmail/Storage?ocid=TXT_TAGLM_WL_HM_Tuto
rial_Storage_062009
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | MS3SPA on an O-200 |
Glenn,
Thanks for the info. I still feel the lever is not the correct one for the
O-200 (P/N 155-28 written on it, what's yours?).
I managed to borrow one of Jon Crookes DVD's for the canopy installation. It
was much better than the manual.
The firewall forward kit from Zenith is the cowling and engine mount. The
rest is up to you.
Thanks
Peter
_____
From: owner-continental-list-server@matronics.com
[mailto:owner-continental-list-server@matronics.com] On Behalf Of GLENN
JOHNSON
Sent: Monday, 29 June 2009 9:10 PM
Subject: RE: Continental-List: MS3SPA on an O-200
Hi Peter
I had to route my mixture for my O-200 from center firewall toward the
passenger side, under the exhaust the then down to the back side of the
Marvel carb. I ended up making a bracket and bolting it to the bolts that
support the oil sump(not the rings of nuts). I used a "generic" throttle
and mixture cable and then cut them to length very carefully as these cables
can't be taken apart as the "locking" mechanism will come apart. Bottom
line is do not let the cable rub anywhere (I used lots of cable supports)
and secure it near the carb so that it will no flex when pushed.
I have to say my plane was easy to buold until I got to the canopy (poor
instruction) and firewall forward (no instruction) especially since I did
not buy a firewall forward kit.
Hope this helps.
Glenn
N676L 601XL Completed
Chesapeake
VA
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|