---------------------------------------------------------- Continental-List Digest Archive --- Total Messages Posted Tue 06/30/09: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 03:53 AM - Re: MS3SPA on an O-200 (GLENN JOHNSON) 2. 04:21 AM - Re: MS3SPA on an O-200 (Peter W Johnson) 3. 05:01 AM - Re: MS3SPA on an O-200 (Kevin Sheely) 4. 07:10 AM - Re: MS3SPA on an O-200 (Peter W Johnson) ________________________________ Message 1 _____________________________________ Time: 03:53:57 AM PST US From: GLENN JOHNSON Subject: RE: Continental-List: MS3SPA on an O-200 Hi Peter I bought my engine off Ebay out of a 150 and it was very complete. Only th ing I had to add was cooling baffles. I'd check out the web sites for the carb and see what you can get from there or if you can get a rebuild / part s manual that would answer you question. Hope that helps. Glenn N676L 601XL Completed Chesapeake VA From: vk3eka@bigpond.net.au Subject: RE: Continental-List: MS3SPA on an O-200 Glenn=2C Thanks for the info. I still feel the lever is not the correct one for the O-200 (P/N 155-28 written on it=2C what=92s yours?). I managed to borrow one of Jon Crookes DVD=92s for the canopy installation. It was much better than the manual. The firewall forward kit from Zenith is the cowling and engine mount. The r est is up to you. Thanks Peter From: owner-continental-list-server@matronics.com [mailto:owner-continental -list-server@matronics.com] On Behalf Of GLENN JOHNSON Sent: Monday=2C 29 June 2009 9:10 PM Subject: RE: Continental-List: MS3SPA on an O-200 Hi Peter I had to route my mixture for my O-200 from center firewall toward the pass enger side=2C under the exhaust the then down to the back side of the Marve l carb. I ended up making a bracket and bolting it to the bolts that suppo rt the oil sump(not the rings of nuts). I used a "generic" throttle and mi xture cable and then cut them to length very carefully as these cables can' t be taken apart as the "locking" mechanism will come apart. Bottom line i s do not let the cable rub anywhere (I used lots of cable supports) and sec ure it near the carb so that it will no flex when pushed. I have to say my plane was easy to buold until I got to the canopy (poor in struction) and firewall forward (no instruction) especially since I did not buy a firewall forward kit. Hope this helps. Glenn N676L 601XL Completed Chesapeake VA _________________________________________________________________ Windows Live=99 SkyDrive=99: Get 25 GB of free online storage. http://windowslive.com/online/skydrive?ocid=TXT_TAGLM_WL_SD_25GB_062009 ________________________________ Message 2 _____________________________________ Time: 04:21:33 AM PST US From: "Peter W Johnson" Subject: RE: Continental-List: MS3SPA on an O-200 Glenn, Thanks, I have had a look around the 'net but most info would come from a $70 parts manual. I'll see what else I can have a look at in my local airport. Cheers Peter _____ From: owner-continental-list-server@matronics.com [mailto:owner-continental-list-server@matronics.com] On Behalf Of GLENN JOHNSON Sent: Tuesday, 30 June 2009 8:52 PM Subject: RE: Continental-List: MS3SPA on an O-200 Hi Peter I bought my engine off Ebay out of a 150 and it was very complete. Only thing I had to add was cooling baffles. I'd check out the web sites for the carb and see what you can get from there or if you can get a rebuild / parts manual that would answer you question. Hope that helps. Glenn N676L 601XL Completed Chesapeake VA _____ From: vk3eka@bigpond.net.au Subject: RE: Continental-List: MS3SPA on an O-200 Glenn, Thanks for the info. I still feel the lever is not the correct one for the O-200 (P/N 155-28 written on it, what's yours?). I managed to borrow one of Jon Crookes DVD's for the canopy installation. It was much better than the manual. The firewall forward kit from Zenith is the cowling and engine mount. The rest is up to you. Thanks Peter _____ From: owner-continental-list-server@matronics.com [mailto:owner-continental-list-server@matronics.com] On Behalf Of GLENN JOHNSON Sent: Monday, 29 June 2009 9:10 PM Subject: RE: Continental-List: MS3SPA on an O-200 Hi Peter I had to route my mixture for my O-200 from center firewall toward the passenger side, under the exhaust the then down to the back side of the Marvel carb. I ended up making a bracket and bolting it to the bolts that support the oil sump(not the rings of nuts). I used a "generic" throttle and mixture cable and then cut them to length very carefully as these cables can't be taken apart as the "locking" mechanism will come apart. Bottom line is do not let the cable rub anywhere (I used lots of cable supports) and secure it near the carb so that it will no flex when pushed. I have to say my plane was easy to buold until I got to the canopy (poor instruction) and firewall forward (no instruction) especially since I did not buy a firewall forward kit. Hope this helps. Glenn N676L 601XL Completed Chesapeake VA List">http://www.matronics.com/Navigator?Continental-List ronics.com ww.matronics.com/contribution _____ Windows LiveT SkyDriveT: Get 25 GB of free online storage. Get it on your BlackBerry or iPhone. ________________________________ Message 3 _____________________________________ Time: 05:01:18 AM PST US From: Kevin Sheely Subject: Re: Continental-List: MS3SPA on an O-200 Peter,=0A=0AMine comes in from the passenger side also. Check out this pict ure: http://3.bp.blogspot.com/_EJudOzvIdUA/Shs7qdwwf2I/AAAAAAAAAY0/g8-gPpQf dZI/s1600-h/Carb+Inlet+Elbow-15.jpg=0A=0AKevin=0A=0A=0A=0A_________________ _______________=0AFrom: Peter W Johnson =0ATo: conti nental-list@matronics.com=0ASent: Monday, June 29, 2009 4:42:34 AM=0ASubjec t: Continental-List: MS3SPA on an O-200=0A=0A--> Continental-List message p osted by: "Peter W Johnson" =0A=0AHi Guys,=0A=0AI am installing an O-200 on a Zenith 601XL. I am having difficulty routing=0Ath e mixture cable from the carb to the cockpit.=0A=0APresently the lever oper ates in such a way as to put the oil sump directly=0Ain its way. I think I have the wrong lever on the carb. The number is=0A155-28. Does anybody know what part # I should have?=0A=0ACheers=0A=0APeter=0AWonthaggi Australia=0A =================== ________________________________ Message 4 _____________________________________ Time: 07:10:37 AM PST US From: "Peter W Johnson" Subject: RE: Continental-List: MS3SPA on an O-200 Kevin, Thanks, looking at the picture I can see I have a different mixture lever. If I can find out what number I need I can order one. Many thanks Peter _____ From: owner-continental-list-server@matronics.com [mailto:owner-continental-list-server@matronics.com] On Behalf Of Kevin Sheely Sent: Tuesday, 30 June 2009 9:58 PM Subject: Re: Continental-List: MS3SPA on an O-200 Peter, Mine comes in from the passenger side also. Check out this picture: http://3.bp.blogspot.com/_EJudOzvIdUA/Shs7qdwwf2I/AAAAAAAAAY0/g8-gPpQfdZI/s1 600-h/Carb+Inlet+Elbow-15.jpg Kevin _____ From: Peter W Johnson Sent: Monday, June 29, 2009 4:42:34 AM Subject: Continental-List: MS3SPA on an O-200 Hi Guys, I am installing an O-200 on a Zenith 601XL. I am having difficulty routing the mixture cable from the carb to the cockpit. Presently the lever operates in such a way as to put the oil sump directly in its way. I think I have the wrong lever on the carb. The number is 155-28. Does anybody know what part # I should have? Cheers Peter Wonthaggi ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message continental-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Continental-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/continental-list Browse Digests http://www.matronics.com/digest/continental-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.