Today's Message Index:
----------------------
1. 11:26 AM - Re: Yak-List Digest: 2 Msgs - 01/10/18 (Frederick Slyfield)
2. 11:26 AM - Re: Yak-List Digest: 2 Msgs - 01/10/18 (Frederick Slyfield)
3. 11:48 AM - Re: Re: Yak-List Digest: 2 Msgs - 01/10/18 (Hank Gibson)
4. 11:52 AM - Re: Re: Yak-List Digest: 2 Msgs - 01/10/18 (Scott Andrews)
5. 12:33 PM - Re: Re: Yak-List Digest: 2 Msgs - 01/10/18 (A. Dennis Savarese)
6. 02:43 PM - Re: Re: Yak-List Digest: 2 Msgs - 01/10/18 (Byron Fox)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Yak-List Digest: 2 Msgs - 01/10/18 |
Ok Gang, need to plumb the knowledge banks to track and fix a Nanchang air
leak. Both main and emergency tanks leak down to 21 ATMs overnight with air
valves closed. All pressures pump up and fill normally after start. No
audible air leaks noted, first problem in 20 years of ownership. New
Emergency tank was installed last month during annual...(note: old
emergency tank would leak out completely overnight). Firewall check valves
were replaced about 6 years ago, Doug Sapp stainless air valve put into
main air valve maybe 5 years. Where to start?
Skip Slyfield
N75480
On Thursday, January 11, 2018, Yak-List Digest Server <
yak-list@matronics.com> wrote:
> *
>
> =================================================
> Online Versions of Today's List Digest Archive
> =================================================
>
> Today's complete Yak-List Digest can also be found in either of the
> two Web Links listed below. The .html file includes the Digest formatted
> in HTML for viewing with a web browser and features Hyperlinked Indexes
> and Message Navigation. The .txt file includes the plain ASCII version
> of the Yak-List Digest and can be viewed with a generic text editor
> such as Notepad or with a web browser.
>
> HTML Version:
>
> http://www.matronics.com/digest/digestview.php?Style
> 82701&View=html&Chapter 18-01-10&Archive=Yak
>
> Text Version:
>
> http://www.matronics.com/digest/digestview.php?Style
> 82701&View=txt&Chapter 18-01-10&Archive=Yak
>
>
> ===============================================
> EMail Version of Today's List Digest Archive
> ===============================================
>
>
> ----------------------------------------------------------
> Yak-List Digest Archive
> ---
> Total Messages Posted Wed 01/10/18: 2
> ----------------------------------------------------------
>
>
> Today's Message Index:
> ----------------------
>
> 1. 06:59 AM - Starting coil wire (Jesus Sagastuy) (Jill Gernetzke)
> 2. 08:00 PM - Yak-52 Intercom adjustment (Looigi)
>
>
> ________________________________ Message 1
> _____________________________________
>
>
> Time: 06:59:10 AM PST US
> From: "Jill Gernetzke" <jill@m-14p.com>
> Subject: Yak-List: Starting coil wire (Jesus Sagastuy)
>
>
> Jesus,
>
> We fabricate custom booster coil wires with conduits and aircraft ignition
> wire. Contact me offlist, if you are interested.
>
>
> Jill
> M-14P, Inc.
> 4905 Flightline Drive
> Kingman, AZ 86401
> 928-681-4400
> www.m-14p.com
>
>
> -----Original Message-----
> From: owner-yak-list-server@matronics.com
> [mailto:owner-yak-list-server@matronics.com] On Behalf Of Yak-List Digest
> Server
> Sent: Wednesday, January 10, 2018 12:51 AM
> Subject: Yak-List Digest: 1 Msgs - 01/09/18
>
> *
>
> ================================================
> Online Versions of Today's List Digest Archive
> ================================================
>
> Today's complete Yak-List Digest can also be found in either of the two Web
> Links listed below. The .html file includes the Digest formatted in HTML
> for viewing with a web browser and features Hyperlinked Indexes and Message
> Navigation. The .txt file includes the plain ASCII version of the Yak-List
> Digest and can be viewed with a generic text editor such as Notepad or with
> a web browser.
>
> HTML Version:
>
>
> http://www.matronics.com/digest/digestview.php?Style
> 82701&View=html&Chapter
> 18-01-09&Archive=Yak
>
> Text Version:
>
>
> http://www.matronics.com/digest/digestview.php?Style
> 82701&View=txt&Chapter
> 2018-01-09&Archive=Yak
>
>
> ==============================================
> EMail Version of Today's List Digest Archive
> ==============================================
>
>
> ----------------------------------------------------------
> Yak-List Digest Archive
> ---
> Total Messages Posted Tue 01/09/18: 1
> ----------------------------------------------------------
>
>
> Today's Message Index:
> ----------------------
>
> 1. 02:28 PM - Starting coil wire (Jesus Sagastuy)
>
>
> ________________________________ Message 1
> _____________________________________
>
>
> Time: 02:28:23 PM PST US
> From: "Jesus Sagastuy" <j_sagastuy@yahoo.es>
> Subject: Yak-List: Starting coil wire
>
> Hello
>
>
> I cannot start the engine and I have checked the wire between the Starting
> coil and the left magneto, as Dennis explained in others messages.
>
> The end of the wire seems to be burned. I have checked the continuity and
> it
> is ok but not touching the spring.
>
> Could you give me any advice? Is it possible to buy a new one wire
> complete?
> the spring must be replaced?
>
>
> Best regards
>
>
> Jes=FAs Sagastuy
>
> EC-IAQ
>
>
> ________________________________ Message 2
> _____________________________________
>
>
> Time: 08:00:53 PM PST US
> Subject: Yak-List: Yak-52 Intercom adjustment
> From: "Looigi" <cdoburton@gmail.com>
>
>
> Hello All,
>
> The intercom and radio in our Yak-52 is a little quiet and hard to hear in
> the
> back seat of out Yak-52 even with the volume all the way up. It has been
> modified
> (like most I guess) to have the western GA type plugs but still retains the
> original SPU-9 intercom, Baklan radio etc. We have tried multiple headsets
> and they are all the same.
>
> Is there an adjustment somewhere in the guts of the intercom I can tweak?
>
> Many thanks
> Chris
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=477217#477217
>
>
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Yak-List Digest: 2 Msgs - 01/10/18 |
Ok Gang, need to plumb the knowledge banks to track and fix a Nanchang air
leak. Both main and emergency tanks leak down to 21 ATMs overnight with air
valves closed. All pressures pump up and fill normally after start. No
audible air leaks noted, first problem in 20 years of ownership. New
Emergency tank was installed last month during annual...(note: old
emergency tank would leak out completely overnight). Firewall check valves
were replaced about 6 years ago, Doug Sapp stainless air valve put into
main air valve maybe 5 years. Where to start?
Skip Slyfield
N75480
On Thursday, January 11, 2018, Yak-List Digest Server <
yak-list@matronics.com> wrote:
> *
>
> =================================================
> Online Versions of Today's List Digest Archive
> =================================================
>
> Today's complete Yak-List Digest can also be found in either of the
> two Web Links listed below. The .html file includes the Digest formatted
> in HTML for viewing with a web browser and features Hyperlinked Indexes
> and Message Navigation. The .txt file includes the plain ASCII version
> of the Yak-List Digest and can be viewed with a generic text editor
> such as Notepad or with a web browser.
>
> HTML Version:
>
> http://www.matronics.com/digest/digestview.php?Style
> 82701&View=html&Chapter 18-01-10&Archive=Yak
>
> Text Version:
>
> http://www.matronics.com/digest/digestview.php?Style
> 82701&View=txt&Chapter 18-01-10&Archive=Yak
>
>
> ===============================================
> EMail Version of Today's List Digest Archive
> ===============================================
>
>
> ----------------------------------------------------------
> Yak-List Digest Archive
> ---
> Total Messages Posted Wed 01/10/18: 2
> ----------------------------------------------------------
>
>
> Today's Message Index:
> ----------------------
>
> 1. 06:59 AM - Starting coil wire (Jesus Sagastuy) (Jill Gernetzke)
> 2. 08:00 PM - Yak-52 Intercom adjustment (Looigi)
>
>
> ________________________________ Message 1
> _____________________________________
>
>
> Time: 06:59:10 AM PST US
> From: "Jill Gernetzke" <jill@m-14p.com>
> Subject: Yak-List: Starting coil wire (Jesus Sagastuy)
>
>
> Jesus,
>
> We fabricate custom booster coil wires with conduits and aircraft ignition
> wire. Contact me offlist, if you are interested.
>
>
> Jill
> M-14P, Inc.
> 4905 Flightline Drive
> Kingman, AZ 86401
> 928-681-4400
> www.m-14p.com
>
>
> -----Original Message-----
> From: owner-yak-list-server@matronics.com
> [mailto:owner-yak-list-server@matronics.com] On Behalf Of Yak-List Digest
> Server
> Sent: Wednesday, January 10, 2018 12:51 AM
> Subject: Yak-List Digest: 1 Msgs - 01/09/18
>
> *
>
> ================================================
> Online Versions of Today's List Digest Archive
> ================================================
>
> Today's complete Yak-List Digest can also be found in either of the two Web
> Links listed below. The .html file includes the Digest formatted in HTML
> for viewing with a web browser and features Hyperlinked Indexes and Message
> Navigation. The .txt file includes the plain ASCII version of the Yak-List
> Digest and can be viewed with a generic text editor such as Notepad or with
> a web browser.
>
> HTML Version:
>
>
> http://www.matronics.com/digest/digestview.php?Style
> 82701&View=html&Chapter
> 18-01-09&Archive=Yak
>
> Text Version:
>
>
> http://www.matronics.com/digest/digestview.php?Style
> 82701&View=txt&Chapter
> 2018-01-09&Archive=Yak
>
>
> ==============================================
> EMail Version of Today's List Digest Archive
> ==============================================
>
>
> ----------------------------------------------------------
> Yak-List Digest Archive
> ---
> Total Messages Posted Tue 01/09/18: 1
> ----------------------------------------------------------
>
>
> Today's Message Index:
> ----------------------
>
> 1. 02:28 PM - Starting coil wire (Jesus Sagastuy)
>
>
> ________________________________ Message 1
> _____________________________________
>
>
> Time: 02:28:23 PM PST US
> From: "Jesus Sagastuy" <j_sagastuy@yahoo.es>
> Subject: Yak-List: Starting coil wire
>
> Hello
>
>
> I cannot start the engine and I have checked the wire between the Starting
> coil and the left magneto, as Dennis explained in others messages.
>
> The end of the wire seems to be burned. I have checked the continuity and
> it
> is ok but not touching the spring.
>
> Could you give me any advice? Is it possible to buy a new one wire
> complete?
> the spring must be replaced?
>
>
> Best regards
>
>
> Jes=FAs Sagastuy
>
> EC-IAQ
>
>
> ________________________________ Message 2
> _____________________________________
>
>
> Time: 08:00:53 PM PST US
> Subject: Yak-List: Yak-52 Intercom adjustment
> From: "Looigi" <cdoburton@gmail.com>
>
>
> Hello All,
>
> The intercom and radio in our Yak-52 is a little quiet and hard to hear in
> the
> back seat of out Yak-52 even with the volume all the way up. It has been
> modified
> (like most I guess) to have the western GA type plugs but still retains the
> original SPU-9 intercom, Baklan radio etc. We have tried multiple headsets
> and they are all the same.
>
> Is there an adjustment somewhere in the guts of the intercom I can tweak?
>
> Many thanks
> Chris
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=477217#477217
>
>
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Yak-List Digest: 2 Msgs - 01/10/18 |
I would start at firewall check valves next to start solenoid first. Inspec
t and re-build.
Hoot
Sent from my iPhone
> On Jan 12, 2018, at 2:26 PM, Frederick Slyfield <norske.fly@gmail.com> wro
te:
>
> Ok Gang, need to plumb the knowledge banks to track and fix a Nanchang air
leak. Both main and emergency tanks leak down to 21 ATMs overnight with air
valves closed. All pressures pump up and fill normally after start. No audi
ble air leaks noted, first problem in 20 years of ownership. New Emergency t
ank was installed last month during annual...(note: old emergency tank would
leak out completely overnight). Firewall check valves were replaced about 6
years ago, Doug Sapp stainless air valve put into main air valve maybe 5 ye
ars. Where to start?
>
>
> Skip Slyfield
> N75480
>
>> On Thursday, January 11, 2018, Yak-List Digest Server <yak-list@matronics
.com> wrote:
>> *
>>
>> ========================
==========================
>> Online Versions of Today's List Digest Archive
>> ========================
==========================
>>
>> Today's complete Yak-List Digest can also be found in either of the
>> two Web Links listed below. The .html file includes the Digest formatted
>> in HTML for viewing with a web browser and features Hyperlinked Indexes
>> and Message Navigation. The .txt file includes the plain ASCII version
>> of the Yak-List Digest and can be viewed with a generic text editor
>> such as Notepad or with a web browser.
>>
>> HTML Version:
>>
>> http://www.matronics.com/digest/digestview.php?Style=82701&View=h
tml&Chapter 18-01-10&Archive=Yak
>>
>> Text Version:
>>
>> http://www.matronics.com/digest/digestview.php?Style=82701&View=t
xt&Chapter 18-01-10&Archive=Yak
>>
>>
>> ========================
=======================
>> EMail Version of Today's List Digest Archive
>> ========================
=======================
>>
>>
>> ----------------------------------------------------------
>> Yak-List Digest Archive
>> ---
>> Total Messages Posted Wed 01/10/18: 2
>> ----------------------------------------------------------
>>
>>
>> Today's Message Index:
>> ----------------------
>>
>> 1. 06:59 AM - Starting coil wire (Jesus Sagastuy) (Jill Gernetzke)
>> 2. 08:00 PM - Yak-52 Intercom adjustment (Looigi)
>>
>>
>>
>> ________________________________ Message 1 ____________________________
_________
>>
>>
>> Time: 06:59:10 AM PST US
>> From: "Jill Gernetzke" <jill@m-14p.com>
>> Subject: Yak-List: Starting coil wire (Jesus Sagastuy)
>>
>>
>> Jesus,
>>
>> We fabricate custom booster coil wires with conduits and aircraft ignitio
n
>> wire. Contact me offlist, if you are interested.
>>
>>
>> Jill
>> M-14P, Inc.
>> 4905 Flightline Drive
>> Kingman, AZ 86401
>> 928-681-4400
>> www.m-14p.com
>>
>>
>> -----Original Message-----
>> From: owner-yak-list-server@matronics.com
>> [mailto:owner-yak-list-server@matronics.com] On Behalf Of Yak-List Digest
>> Server
>> Sent: Wednesday, January 10, 2018 12:51 AM
>> Subject: Yak-List Digest: 1 Msgs - 01/09/18
>>
>> *
>>
>> ========================
========================
>> Online Versions of Today's List Digest Archive
>> =======================
>>
>> Today's complete Yak-List Digest can also be found in either of the two W
eb
>> Links listed below. The .html file includes the Digest formatted in HTML
>> for viewing with a web browser and features Hyperlinked Indexes and Messa
ge
>> Navigation. The .txt file includes the plain ASCII version of the Yak-Li
st
>> Digest and can be viewed with a generic text editor such as Notepad or wi
th
>> a web browser.
>>
>> HTML Version:
>>
>>
>> http://www.matronics.com/digest/digestview.php?Style=82701&View=html&
Chapter
>> 18-01-09&Archive=Yak
>>
>> Text Version:
>>
>>
>> http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&C
hapter
>> 2018-01-09&Archive=Yak
>>
>>
>> ========================
======================
>> EMail Version of Today's List Digest Archive
>> =====================
>>
>>
>> ----------------------------------------------------------
>> Yak-List Digest Archive
>> ---
>> Total Messages Posted Tue 01/09/18: 1
>> ----------------------------------------------------------
>>
>>
>> Today's Message Index:
>> ----------------------
>>
>> 1. 02:28 PM - Starting coil wire (Jesus Sagastuy)
>>
>>
>> ________________________________ Message 1
>> _____________________________________
>>
>>
>> Time: 02:28:23 PM PST US
>> From: "Jesus Sagastuy" <j_sagastuy@yahoo.es>
>> Subject: Yak-List: Starting coil wire
>>
>> Hello
>>
>>
>> I cannot start the engine and I have checked the wire between the Startin
g
>> coil and the left magneto, as Dennis explained in others messages.
>>
>> The end of the wire seems to be burned. I have checked the continuity and
it
>> is ok but not touching the spring.
>>
>> Could you give me any advice? Is it possible to buy a new one wire comple
te?
>> the spring must be replaced?
>>
>>
>> Best regards
>>
>>
>> Jes=FAs Sagastuy
>>
>> EC-IAQ
>>
>>
>> ________________________________ Message 2 ____________________________
_________
>>
>>
>> Time: 08:00:53 PM PST US
>> Subject: Yak-List: Yak-52 Intercom adjustment
>> From: "Looigi" <cdoburton@gmail.com>
>>
>>
>> Hello All,
>>
>> The intercom and radio in our Yak-52 is a little quiet and hard to hear i
n the
>> back seat of out Yak-52 even with the volume all the way up. It has been
modified
>> (like most I guess) to have the western GA type plugs but still retains t
he
>> original SPU-9 intercom, Baklan radio etc. We have tried multiple headse
ts
>> and they are all the same.
>>
>> Is there an adjustment somewhere in the guts of the intercom I can tweak?
>>
>> Many thanks
>> Chris
>>
>>
>> Read this topic online here:
>>
>> http://forums.matronics.com/viewtopic.php?p=477217#477217
>>
>>
>>
>>
>> =========================
>> List" target="_blank">http://www.matronics.com/Navigator?Yak-List
>> =========================
>> FORUMS -
>> _blank">http://forums.matronics.com
>> =========================
>> WIKI -
>> lank">http://wiki.matronics.com
>> =========================
>> b Site -
>> -Matt Dralle, List Admin.
>> target="_blank">http://www.matronics.com/contribution
>> =========================
>>
>>
>>
>>
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Yak-List Digest: 2 Msgs - 01/10/18 |
Skip,
=C2-
=C2- =C2- Check the snot valve on the belly of the airplane, most likel
y not closed all the way or very small leak do to corrosion.
=C2-
Munch=C2-
=C2-
In a message dated 1/12/2018 12:48:42 PM US Mountain Standard Time, norske.
fly@gmail.com writes:
=C2-
Ok Gang, need to plumb the knowledge banks to track and fix a Nanchang air
leak. Both main and emergency tanks leak down to 21 ATMs overnight with air
valves closed. All pressures pump up and fill normally after start. No aud
ible air leaks noted, first problem in 20 years of ownership. New Emergency
tank was installed last month during annual...(note: old emergency tank wo
uld leak out completely overnight). Firewall check valves were replaced abo
ut 6 years ago, Doug Sapp stainless air valve put into main air valve maybe
5 years. Where to start?=C2-
=C2-
=C2-
Skip Slyfield
N75480
On Thursday, January 11, 2018, Yak-List Digest Server <yak-list@matronics.c
om> wrote:
*
=C2-======================
==
=C2- =C2-Online Versions of Today's List Digest Archive
=C2-======================
==
Today's complete Yak-List Digest can also be found in either of the
two Web Links listed below.=C2- The .html file includes the Digest forma
tted
in HTML for viewing with a web browser and features Hyperlinked Indexes
and Message Navigation.=C2- The .txt file includes the plain ASCII versi
on
of the Yak-List Digest and can be viewed with a generic text editor
such as Notepad or with a web browser.
HTML Version:
=C2- =C2- http://www.matronics.com/digest/digestview.php?Style=82701
&View=html&Chapter 18-01-10&Archive=Yak
Text Version:
=C2- =C2- http://www.matronics.com/digest/digestview.php?Style=82701
&View=txt&Chapter 18-01-10&Archive=Yak
=C2-======================
=C2- =C2-EMail Version of Today's List Digest Archive
=C2-======================
=C2- =C2- =C2- =C2- =C2- =C2----------------------------------
-------------------------
=C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2
- =C2- =C2- =C2-Yak-List Digest Archive
=C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2
- =C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2- ---
=C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2
-Total Messages Posted Wed 01/10/18: 2
=C2- =C2- =C2- =C2- =C2- =C2----------------------------------
-------------------------
Today's Message Index:
----------------------
=C2- =C2- =C2-1. 06:59 AM - Starting coil wire (Jesus Sagastuy)=C2
- (Jill Gernetzke)
=C2- =C2- =C2-2. 08:00 PM - Yak-52 Intercom adjustment=C2- (Looigi
)
________________________________=C2- Message 1=C2- ___________________
__________________
Time: 06:59:10 AM PST US
From: "Jill Gernetzke" <jill@m-14p.com>
Subject: Yak-List: Starting coil wire=C2- (Jesus Sagastuy)
Jesus,
We fabricate custom booster coil wires with conduits and aircraft ignition
wire.=C2- Contact me offlist, if you are interested.
Jill
M-14P, Inc.
4905 Flightline Drive
Kingman, AZ=C2- 86401
928-681-4400
www.m-14p.com
-----Original Message-----
From: owner-yak-list-server@matronics.com
[mailto:owner-yak-list-server@matronics.com] On Behalf Of Yak-List Digest
Server
Sent: Wednesday, January 10, 2018 12:51 AM
Subject: Yak-List Digest: 1 Msgs - 01/09/18
*
=C2-======================
=
=C2- =C2-Online Versions of Today's List Digest Archive
=======================
Today's complete Yak-List Digest can also be found in either of the two We
b
Links listed below.=C2- The .html file includes the Digest formatted in
HTML
for viewing with a web browser and features Hyperlinked Indexes and Messag
e
Navigation.=C2- The .txt file includes the plain ASCII version of the Ya
k-List
Digest and can be viewed with a generic text editor such as Notepad or wit
h
a web browser.
HTML Version:
http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Ch
apter
=C2-18-01-09&Archive=Yak
Text Version:
http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Cha
pter
2018-01-09&Archive=Yak
=C2-======================
========================
=C2- =C2-EMail Version of Today's List Digest Archive
=====================
=C2- =C2- =C2- =C2- =C2- =C2----------------------------------
-------------------------
=C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2
- =C2- =C2- =C2-Yak-List Digest Archive
=C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2
- =C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2- ---
=C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2- =C2
-Total Messages Posted Tue 01/09/18: 1
=C2- =C2- =C2- =C2- =C2- =C2----------------------------------
-------------------------
Today's Message Index:
----------------------
=C2- =C2- =C2-1. 02:28 PM - Starting coil wire=C2- (Jesus Sagastuy
)
________________________________=C2- Message 1
_____________________________________
Time: 02:28:23 PM PST US
From: "Jesus Sagastuy" <j_sagastuy@yahoo.es>
Subject: Yak-List: Starting coil wire
Hello
I cannot start the engine and I have checked the wire between the Starting
coil and the left magneto, as Dennis explained in others messages.
The end of the wire seems to be burned. I have checked the continuity and
it
is ok but not touching the spring.
Could you give me any advice? Is it possible to buy a new one wire complet
e?
the spring must be replaced?
Best regards
Jes=FAs Sagastuy
EC-IAQ
________________________________=C2- Message 2=C2- ___________________
__________________
Time: 08:00:53 PM PST US
Subject: Yak-List: Yak-52 Intercom adjustment
From: "Looigi" <cdoburton@gmail.com>
Hello All,
The intercom and radio in our Yak-52 is a little quiet and hard to hear in
the
back seat of out Yak-52 even with the volume all the way up.=C2- It has
been modified
(like most I guess) to have the western GA type plugs but still retains th
e
original SPU-9 intercom, Baklan radio etc.=C2- We have tried multiple he
adsets
and they are all the same.
Is there an adjustment somewhere in the guts of the intercom I can tweak?
Many thanks
Chris
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=477217#477217
========================
===========
List" target="_blank">http://www.matronics.com/Navigator?Yak-List
========================
===========
FORUMS -
_blank">http://forums.matronics.com
========================
===========
WIKI -
lank">http://wiki.matronics.com
========================
===========
b Site -
=C2- =C2- =C2- =C2- =C2- -Matt Dralle, List Admin.
target="_blank">http://www.matronics.com/contribution
========================
===========
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Yak-List Digest: 2 Msgs - 01/10/18 |
Skip,
I would go back to the check valves on the firewall firstsince both main
and emergency are leaking down. 5-6 years without a check valve problem
is excellent. But as we all know, they do not last indefinitely. Might
be a good idea to bite the bullet and rebuild all of them and be done
with it.
Dennis
A. Dennis Savarese
334-546-8182 (mobile)
www.yak-52.com
Skype - Yakguy1
On 1/12/2018 2:26 PM, Frederick Slyfield wrote:
> Ok Gang, need to plumb the knowledge banks to track and fix a Nanchang
> air leak. Both main and emergency tanks leak down to 21 ATMs overnight
> with air valves closed. All pressures pump up and fill normally after
> start. No audible air leaks noted, first problem in 20 years of
> ownership. New Emergency tank was installed last month during
> annual...(note: old emergency tank would leak out completely
> overnight). Firewall check valves were replaced about 6 years ago,
> Doug Sapp stainless air valve put into main air valve maybe 5 years.
> Where to start?
>
>
> Skip Slyfield
> N75480
>
> On Thursday, January 11, 2018, Yak-List Digest Server
> <yak-list@matronics.com <mailto:yak-list@matronics.com>> wrote:
>
> *
>
> =================================================
> Online Versions of Today's List Digest Archive
> =================================================
>
> Today's complete Yak-List Digest can also be found in either of the
> two Web Links listed below. The .html file includes the Digest
> formatted
> in HTML for viewing with a web browser and features Hyperlinked
> Indexes
> and Message Navigation. The .txt file includes the plain ASCII
> version
> of the Yak-List Digest and can be viewed with a generic text editor
> such as Notepad or with a web browser.
>
> HTML Version:
>
> http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 18-01-10&Archive=Yak
> <http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 18-01-10&Archive=Yak>
>
> Text Version:
>
> http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 18-01-10&Archive=Yak
> <http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 18-01-10&Archive=Yak>
>
>
> ===============================================
> EMail Version of Today's List Digest Archive
> ===============================================
>
>
> ----------------------------------------------------------
> Yak-List Digest Archive
> ---
> Total Messages Posted Wed 01/10/18: 2
> ----------------------------------------------------------
>
>
> Today's Message Index:
> ----------------------
>
> 1. 06:59 AM - Starting coil wire (Jesus Sagastuy) (Jill
> Gernetzke)
> 2. 08:00 PM - Yak-52 Intercom adjustment (Looigi)
>
>
> ________________________________ Message 1
> _____________________________________
>
>
> Time: 06:59:10 AM PST US
> From: "Jill Gernetzke" <jill@m-14p.com <mailto:jill@m-14p.com>>
> Subject: Yak-List: Starting coil wire (Jesus Sagastuy)
>
>
> Jesus,
>
> We fabricate custom booster coil wires with conduits and aircraft
> ignition
> wire. Contact me offlist, if you are interested.
>
>
> Jill
> M-14P, Inc.
> 4905 Flightline Drive
> Kingman, AZ 86401
> 928-681-4400
> www.m-14p.com <http://www.m-14p.com>
>
>
> -----Original Message-----
> From: owner-yak-list-server@matronics.com
> <mailto:owner-yak-list-server@matronics.com>
> [mailto:owner-yak-list-server@matronics.com
> <mailto:owner-yak-list-server@matronics.com>] On Behalf Of
> Yak-List Digest
> Server
> Sent: Wednesday, January 10, 2018 12:51 AM
> Subject: Yak-List Digest: 1 Msgs - 01/09/18
>
> *
>
> ================================================
> Online Versions of Today's List Digest Archive
> =======================
>
> Today's complete Yak-List Digest can also be found in either of
> the two Web
> Links listed below. The .html file includes the Digest formatted
> in HTML
> for viewing with a web browser and features Hyperlinked Indexes
> and Message
> Navigation. The .txt file includes the plain ASCII version of the
> Yak-List
> Digest and can be viewed with a generic text editor such as
> Notepad or with
> a web browser.
>
> HTML Version:
>
>
> http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter
> <http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter>
> 18-01-09&Archive=Yak
>
> Text Version:
>
>
> http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter
> 2018-01-09&Archive=Yak
> <http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter%0A2018-01-09&Archive=Yak>
>
>
> ==============================================
> EMail Version of Today's List Digest Archive
> =====================
>
>
> ----------------------------------------------------------
> Yak-List Digest Archive
> ---
> Total Messages Posted Tue 01/09/18: 1
> ----------------------------------------------------------
>
>
> Today's Message Index:
> ----------------------
>
> 1. 02:28 PM - Starting coil wire (Jesus Sagastuy)
>
>
> ________________________________ Message 1
> _____________________________________
>
>
> Time: 02:28:23 PM PST US
> From: "Jesus Sagastuy" <j_sagastuy@yahoo.es
> <mailto:j_sagastuy@yahoo.es>>
> Subject: Yak-List: Starting coil wire
>
> Hello
>
>
> I cannot start the engine and I have checked the wire between the
> Starting
> coil and the left magneto, as Dennis explained in others messages.
>
> The end of the wire seems to be burned. I have checked the
> continuity and it
> is ok but not touching the spring.
>
> Could you give me any advice? Is it possible to buy a new one wire
> complete?
> the spring must be replaced?
>
>
> Best regards
>
>
> Jes=FAs Sagastuy
>
> EC-IAQ
>
>
> ________________________________ Message 2
> _____________________________________
>
>
> Time: 08:00:53 PM PST US
> Subject: Yak-List: Yak-52 Intercom adjustment
> From: "Looigi" <cdoburton@gmail.com <mailto:cdoburton@gmail.com>>
>
>
> Hello All,
>
> The intercom and radio in our Yak-52 is a little quiet and hard to
> hear in the
> back seat of out Yak-52 even with the volume all the way up. It
> has been modified
> (like most I guess) to have the western GA type plugs but still
> retains the
> original SPU-9 intercom, Baklan radio etc. We have tried multiple
> headsets
> and they are all the same.
>
> Is there an adjustment somewhere in the guts of the intercom I can
> tweak?
>
> Many thanks
> Chris
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=477217#477217
> <http://forums.matronics.com/viewtopic.php?p=477217#477217>
>
>
> ===================================
> List" target="_blank">http://www.matronics.com/Navigator?Yak-List
> ===================================
> FORUMS -
> _blank">http://forums.matronics.com
> ===================================
> WIKI -
> lank">http://wiki.matronics.com
> ===================================
> b Site -
> -Matt Dralle, List Admin.
> target="_blank">http://www.matronics.com/contribution
> ===================================
>
>
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Yak-List Digest: 2 Msgs - 01/10/18 |
I have the same problem on our CJ, although it=99s just the emergency t
ank that bleeds off to about 30 atmospheres after a week of sitting. In the p
ast, overhauling the starboard firewall check valves solved the problem, but
not now. So, it would seem that source of the slow leak could be the emerge
ncy shutoff valve, the emergency gauge or the air line serving both.
Because the emergency tank immediately recharges upon starting, I=99ve
been too lazy to pursue it, reasoning that I=99ll deal with at annual
. Shame on me.
Blitz Fox
415-307-2405
> On Jan 12, 2018, at 12:33 PM, A. Dennis Savarese <dsavarese0812@bellsouth.
net> wrote:
>
uth.net>
>
> Skip,
> I would go back to the check valves on the firewall firstsince both main a
nd emergency are leaking down.=C3=AF=C2=C2=BD 5-6 years without a check v
alve problem is excellent.=C3=AF=C2=C2=BD But as we all know, they do not
last indefinitely.=C3=AF=C2=C2=BD Might be a good idea to bite the bulle
t and rebuild all of them and be done with it.
> Dennis
>
> A. Dennis Savarese
> 334-546-8182 (mobile)
> www.yak-52.com
> Skype - Yakguy1
>
>> On 1/12/2018 2:26 PM, Frederick Slyfield wrote:
>> Ok Gang, need to plumb the knowledge banks to track and fix a Nanchang ai
r leak. Both main and emergency tanks leak down to 21 ATMs overnight with ai
r valves closed. All pressures pump up and fill normally after start. No aud
ible air leaks noted, first problem in 20 years of ownership. New Emergency t
ank was installed last month during annual...(note: old emergency tank would
leak out completely overnight). Firewall check valves were replaced about 6
years ago, Doug Sapp stainless air valve put into main air valve maybe 5 ye
ars. Where to start?
>>
>>
>> Skip Slyfield
>> N75480
>>
>> On Thursday, January 11, 2018, Yak-List Digest Server <yak-list@matronics
.com <mailto:yak-list@matronics.com>> wrote:
>>
>> *
>>
>> =C3=AF=C2=C2=BD==================
==========================
=====
>> =C3=AF=C2=C2=BD =C3=AF=C2=C2=BDOnline Versions of Today's List D
igest Archive
>> =C3=AF=C2=C2=BD==================
==========================
=====
>>
>> Today's complete Yak-List Digest can also be found in either of the
>> two Web Links listed below.=C3=AF=C2=C2=BD The .html file includes t
he Digest
>> formatted
>> in HTML for viewing with a web browser and features Hyperlinked
>> Indexes
>> and Message Navigation.=C3=AF=C2=C2=BD The .txt file includes the p
lain ASCII
>> version
>> of the Yak-List Digest and can be viewed with a generic text editor
>> such as Notepad or with a web browser.
>>
>> HTML Version:
>>
>> http://www.matronics.com/digest/digestview.php?Style=82701&View=ht
ml&Chapter 18-01-10&Archive=Yak
>> <http://www.matronics.com/digest/digestview.php?Style=82701&View=h
tml&Chapter 18-01-10&Archive=Yak>
>>
>> Text Version:
>>
>> http://www.matronics.com/digest/digestview.php?Style=82701&View=tx
t&Chapter 18-01-10&Archive=Yak
>> <http://www.matronics.com/digest/digestview.php?Style=82701&View=t
xt&Chapter 18-01-10&Archive=Yak>
>>
>>
>> =C3=AF=C2=C2=BD==================
==========================
===
>> =C3=AF=C2=C2=BD =C3=AF=C2=C2=BDEMail Version of Today's List Dig
est Archive
>> =C3=AF=C2=C2=BD==================
==========================
===
>>
>>
>> =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2
=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD-----------------------------------
-----------------------
>> =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2
=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2
=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2
=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BDYak-List Digest Archive
>> =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2
=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2
=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2
=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2
=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD ---
>> =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2
=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2
=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BDTotal Messages P
osted Wed 01/10/18: 2
>> =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2
=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD-----------------------------------
-----------------------
>>
>>
>> Today's Message Index:
>> ----------------------
>>
>> =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD1. 06:59 AM - S
tarting coil wire (Jesus Sagastuy)=C3=AF=C2=C2=BD (Jill
>> Gernetzke)
>> =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD2. 08:00 PM - Y
ak-52 Intercom adjustment=C3=AF=C2=C2=BD (Looigi)
>>
>>
>>
>> ________________________________=C3=AF=C2=C2=BD Message 1
>> _____________________________________
>>
>>
>> Time: 06:59:10 AM PST US
>> From: "Jill Gernetzke" <jill@m-14p.com <mailto:jill@m-14p.com>>
>> Subject: Yak-List: Starting coil wire=C3=AF=C2=C2=BD (Jesus Sagastu
y)
>>
>>
>> Jesus,
>>
>> We fabricate custom booster coil wires with conduits and aircraft
>> ignition
>> wire.=C3=AF=C2=C2=BD Contact me offlist, if you are interested.
>>
>>
>> Jill
>> M-14P, Inc.
>> 4905 Flightline Drive
>> Kingman, AZ=C3=AF=C2=C2=BD 86401
>> 928-681-4400
>> www.m-14p.com <http://www.m-14p.com>
>>
>>
>> -----Original Message-----
>> From: owner-yak-list-server@matronics.com
>> <mailto:owner-yak-list-server@matronics.com>
>> [mailto:owner-yak-list-server@matronics.com
>> <mailto:owner-yak-list-server@matronics.com>] On Behalf Of
>> Yak-List Digest
>> Server
>> Sent: Wednesday, January 10, 2018 12:51 AM
>> Subject: Yak-List Digest: 1 Msgs - 01/09/18
>>
>> *
>>
>> =C3=AF=C2=C2=BD==================
==========================
====
>> =C3=AF=C2=C2=BD =C3=AF=C2=C2=BDOnline Versions of Today's List D
igest Archive
>> ========================
>>
>> Today's complete Yak-List Digest can also be found in either of
>> the two Web
>> Links listed below.=C3=AF=C2=C2=BD The .html file includes the Dige
st formatted
>> in HTML
>> for viewing with a web browser and features Hyperlinked Indexes
>> and Message
>> Navigation.=C3=AF=C2=C2=BD The .txt file includes the plain ASCII v
ersion of the
>> Yak-List
>> Digest and can be viewed with a generic text editor such as
>> Notepad or with
>> a web browser.
>>
>> HTML Version:
>>
>>
>> http://www.matronics.com/digest/digestview.php?Style=82701&View=ht
ml&Chapter
>> <http://www.matronics.com/digest/digestview.php?Style=82701&View=h
tml&Chapter>
>> =C3=AF=C2=C2=BD18-01-09&Archive=Yak
>>
>> Text Version:
>>
>>
>> http://www.matronics.com/digest/digestview.php?Style=82701&View=tx
t&Chapter
>> 2018-01-09&Archive=Yak
>> <http://www.matronics.com/digest/digestview.php?Style=82701&View=t
xt&Chapter%0A2018-01-09&Archive=Yak>
>>
>>
>> =C3=AF=C2=C2=BD==================
==========================
==
>> =C3=AF=C2=C2=BD =C3=AF=C2=C2=BDEMail Version of Today's List Dig
est Archive
>> =====================
>>
>>
>> =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2
=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD-----------------------------------
-----------------------
>> =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2
=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2
=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2
=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BDYak-List Digest Archive
>> =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2
=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2
=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2
=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2
=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD ---
>> =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2
=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2
=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BDTotal Messages P
osted Tue 01/09/18: 1
>> =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2
=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD-----------------------------------
-----------------------
>>
>>
>> Today's Message Index:
>> ----------------------
>>
>> =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD1. 02:28 PM - S
tarting coil wire=C3=AF=C2=C2=BD (Jesus Sagastuy)
>>
>>
>> ________________________________=C3=AF=C2=C2=BD Message 1
>> _____________________________________
>>
>>
>> Time: 02:28:23 PM PST US
>> From: "Jesus Sagastuy" <j_sagastuy@yahoo.es
>> <mailto:j_sagastuy@yahoo.es>>
>> Subject: Yak-List: Starting coil wire
>>
>> Hello
>>
>>
>> I cannot start the engine and I have checked the wire between the
>> Starting
>> coil and the left magneto, as Dennis explained in others messages.
>>
>> The end of the wire seems to be burned. I have checked the
>> continuity and it
>> is ok but not touching the spring.
>>
>> Could you give me any advice? Is it possible to buy a new one wire
>> complete?
>> the spring must be replaced?
>>
>>
>> Best regards
>>
>>
>> Jes=FAs Sagastuy
>>
>> EC-IAQ
>>
>>
>> ________________________________=C3=AF=C2=C2=BD Message 2
>> _____________________________________
>>
>>
>> Time: 08:00:53 PM PST US
>> Subject: Yak-List: Yak-52 Intercom adjustment
>> From: "Looigi" <cdoburton@gmail.com <mailto:cdoburton@gmail.com>>
>>
>>
>> Hello All,
>>
>> The intercom and radio in our Yak-52 is a little quiet and hard to
>> hear in the
>> back seat of out Yak-52 even with the volume all the way up. It
>> has been modified
>> (like most I guess) to have the western GA type plugs but still
>> retains the
>> original SPU-9 intercom, Baklan radio etc.=C3=AF=C2=C2=BD We have t
ried multiple
>> headsets
>> and they are all the same.
>>
>> Is there an adjustment somewhere in the guts of the intercom I can
>> tweak?
>>
>> Many thanks
>> Chris
>>
>>
>> Read this topic online here:
>>
>> http://forums.matronics.com/viewtopic.php?p=477217#477217
>> <http://forums.matronics.com/viewtopic.php?p=477217#477217>
>>
>>
>>
>>
>> ========================
===========
>> List" target="_blank">http://www.matronics.com/Navigator?Yak-List
>> ========================
===========
>> FORUMS -
>> _blank">http://forums.matronics.com
>> ========================
===========
>> WIKI -
>> lank">http://wiki.matronics.com
>> ========================
===========
>> b Site -
>> =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2=BD =C3=AF=C2=C2
=BD =C3=AF=C2=C2=BD -Matt Dralle, List Admin.
>> target="_blank">http://www.matronics.com/contribution
>> ========================
===========
>>
>>
>>
>>
>
==========================
=========
==========================
=========
==========================
=========
==========================
=========
==========================
=========
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|