----------------------------------------------------------
                           Pulsar-List Digest Archive
                                      ---
                     Total Messages Posted Sun 08/05/18: 3
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 09:37 AM - Please remove me from your mailing list.  (Bill Denney)
     2. 12:01 PM - Re: Please remove me from your mailing list.  (N3300P)
     3. 08:03 PM - Re: Re: Pulsar-List Digest: 5 Msgs - 08/02/18  (Bill)
 
 
 
________________________________  Message 1  _____________________________________


Time: 09:37:43 AM PST US
From: Bill Denney 
Subject: Pulsar-List: Please remove me from your mailing list.

Can you please remove bad@wordtricks.com and bill@rootle.org from the
Pulsar mailing list?

Thanks,

Bill Denney

________________________________  Message 2  _____________________________________


Time: 12:01:08 PM PST US
Subject: Re: Pulsar-List: Please remove me from your mailing list.
From: N3300P 

You have to unsubscribe yourself here

http://www.matronics.com/subscribe/


On Aug 5, 2018, at 11:35 AM, Bill Denney  wrote:

Can you please remove bad@wordtricks.com and bill@rootle.org from the Pulsar
 mailing list?

Thanks,

Bill Denney

________________________________  Message 3  _____________________________________


Time: 08:03:41 PM PST US
Subject: Re: Pulsar-List: Re: Pulsar-List Digest: 5 Msgs - 08/02/18
From: Bill 

I talked to the Andair rep. at OshKosh. They have a valve for almost 
any engine and especially for those used in the Pulsar, Rotax and 
Jabiru. I've looked at others but theirs have some nice features, see 
Bernie's statement below. Like Bernie, mounting mine in front of the 
stick so I can easily reach it in flight.

Best Regards, Bill
C: 512-415-2991

On 8/3/2018 11:00 AM, Bernard Wilder wrote:
> I bought my selector 22 yeas ago. Still have the brochure.
>
> www.andair.co.uk 
>
> They had a valve made especially for the Rotax 912. Didn't know about 
> it when I bought mine.
>
> Model # FS22D2. Has a unique feature that accommodates the 912 
> requirement for a vapor return.
>
> I accomplished the same thing by connecting the vapor return line to 
> fuel line after the selector valve.
>
> Bernie Wilder
>
> On Fri, Aug 3, 2018 at 9:43 AM, Mark Fox  > wrote:
>
>     The fuel selector has killed people ?
>
>     This is the one I have from the original areodesigns which
>     obviously aircraft spruce still sells
>
>     http://www.aircraftspruce.com/catalog/appages/whfsv.php?clickkey=1606670
>     
>
>     So you guys said you threw yours away as soon as you got it but no
>     one told be what they are using that's way better :(
>
>     Thanks
>
>     On Fri, Aug 3, 2018 at 2:40 AM Pulsar-List Digest Server
>     > wrote:
>
>         *
>
>         ========================
>          Online Versions of Today's List Digest Archive
>         ========================
>
>         Today's complete Pulsar-List Digest can also be found in
>         either of the
>         two Web Links listed below. The .html file includes the
>         Digest formatted
>         in HTML for viewing with a web browser and features
>         Hyperlinked Indexes
>         and Message Navigation. The .txt file includes the plain
>         ASCII version
>         of the Pulsar-List Digest and can be viewed with a generic
>         text editor
>         such as Notepad or with a web browser.
>
>         HTML Version:
>
>         http://www.matronics.com/digest/digestview.php?Style=82701&View=html&Chapter 18-08-02&Archive=Pulsar
>         
>
>         Text Version:
>
>         http://www.matronics.com/digest/digestview.php?Style=82701&View=txt&Chapter 18-08-02&Archive=Pulsar
>         
>
>
>         ======================
>          EMail Version of Today's List Digest Archive
>         ======================
>
>
>             
>         ----------------------------------------------------------
>                      Pulsar-List Digest Archive
>                            ---
>                   Total Messages Posted Thu 08/02/18: 5
>             
>         ----------------------------------------------------------
>
>
>         Today's Message Index:
>         ----------------------
>
>           1. 08:38 AM - Fuel Selector Valve (Mark Fox)
>           2. 11:47 AM - Re: Fuel Selector Valve (Bernard Wilder)
>           3. 12:15 PM - Re: Fuel Selector Valve (FoesFlyDennis)
>           4. 12:37 PM - Re: Fuel Selector Valve (George Gennuso)
>           5. 02:05 PM - Re: Fuel Selector Valve (John Schussler)
>
>
>         ________________________________ Message 1
>         _____________________________________
>
>
>         Time: 08:38:08 AM PST US
>         From: Mark Fox          >
>         Subject: Pulsar-List: Fuel Selector Valve
>
>         All,
>
>         I have the original fuel selector value from the aerodesign
>         kit in 1994.
>         It works but always seems to bind up some over time and I want to
>         upgrade/replace it
>
>         What has been the groups experience with that part? . Any
>         suggestions?
>
>         Seems like Aircraft Spruce has them form $7 - $1000.....Pretty
>         wide range :)
>
>         Thanks
>
>         ________________________________ Message 2
>         _____________________________________
>
>
>         Time: 11:47:59 AM PST US
>         From: Bernard Wilder          >
>         Subject: Re: Pulsar-List: Fuel Selector Valve
>
>         Never used it. Threw it out right away. Bought one from Britain.
>
>         I am pulling all stuff related to Rotax out of my Pulsar
>         getting ready to
>         electrify it. Selector valve still in. I'll look at it this PM.
>
>         Let you know.
>
>         Bernie Wilder
>
>         On Thu, Aug 2, 2018 at 11:34 AM, Mark Fox
>         > wrote:
>
>         > All,
>         >
>         > I have the original fuel selector value from the aerodesign
>         kit in 1994.
>         > It works but always seems to bind up some over time and I
>         want to
>         > upgrade/replace it
>         >
>         > What has been the groups experience with that part? . Any
>         suggestions?
>         >
>         > Seems like Aircraft Spruce has them form $7 -
>         $1000.....Pretty wide range
>         > :)
>         >
>         > Thanks
>         >
>
>         ________________________________ Message 3
>         _____________________________________
>
>
>         Time: 12:15:25 PM PST US
>         From: FoesFlyDennis          >
>         Subject: Re: Pulsar-List: Fuel Selector Valve
>
>         Bernie you just got my attention in a big way!
>         Anything you would share regarding your conversion to electric
>         powerplant
>         would be excitedly appreciated! Online research resources,
>         component
>         sources, pictures or technical drawings, diagrams or technical
>         workup
>         sheets specific to your own project, etc. Sorry... I don't
>         mean to put
>         pressure on you here but that is a potentially very exciting
>         project. I
>         have never been thrilled with the Jabiru 2200 in my P3 and
>         continually
>         watch other engine manufacturers for potential swap but each
>         option has
>         glaring compromises.
>         If you don't have time or energy to put anything together to
>         share, I
>         understand that too. We all are busy. But I sure hope you find
>         very
>         desirable results for your efforts and we all get to see it
>         flying and
>         serving you well.
>         Dennis Tubbs - Pulsar III - N852LW
>         1+623-363-0544
>
>
>         On Thu, Aug 2, 2018, 11:50 AM Bernard Wilder
>         >
>         wrote:
>
>         > Never used it. Threw it out right away. Bought one from
>         Britain.
>         >
>         > I am pulling all stuff related to Rotax out of my Pulsar
>         getting ready to
>         > electrify it. Selector valve still in. I'll look at it
>         this PM.
>         >
>         > Let you know.
>         >
>         > Bernie Wilder
>         >
>         > On Thu, Aug 2, 2018 at 11:34 AM, Mark Fox
>         > wrote:
>         >
>         >> All,
>         >>
>         >> I have the original fuel selector value from the aerodesign
>         kit in 1994.
>         >> It works but always seems to bind up some over time and I
>         want to
>         >> upgrade/replace it
>         >>
>         >> What has been the groups experience with that part? . Any
>         suggestions?
>         >>
>         >> Seems like Aircraft Spruce has them form $7 -
>         $1000.....Pretty wide range
>         >> :)
>         >>
>         >> Thanks
>         >>
>         >
>         >
>
>         ________________________________ Message 4
>         _____________________________________
>
>
>         Time: 12:37:56 PM PST US
>         From: George Gennuso          >
>         Subject: Re: Pulsar-List: Fuel Selector Valve
>
>         Bernie, I'm thinking of doing the same thing to my Pulsar.
>         Have you decided
>         on the motor and battery set up?=C2-
>         George=C2-
>
>
>           On Thursday, August 2, 2018 11:54 AM, Bernard Wilder
>                  mail.com > wrote:
>
>
>         Never used it. Threw it out right away.=C2- Bought one from
>         Britain.
>         I am pulling all stuff related to Rotax out of my Pulsar
>         getting ready to e
>         lectrify it.=C2- Selector valve still in.=C2- I'll look at it
>         this PM.
>         =C2-
>         Let you know.
>         Bernie Wilder
>         On Thu, Aug 2, 2018 at 11:34 AM, Mark Fox
>         > wrote:
>
>         All,
>         I have the original fuel selector value from the aerodesign
>         kit in 1994.=C2
>         - It works but always seems to bind up some over time and I
>         want to upgra
>         de/replace it
>         What has been the groups experience with that part? . Any
>         suggestions?
>         Seems like Aircraft Spruce has them form $7 - $1000.....Pretty
>         wide range :
>         )
>         Thanks
>
>
>         ________________________________ Message 5
>         _____________________________________
>
>
>         Time: 02:05:41 PM PST US
>         From: John Schussler          >
>         Subject: Re: Pulsar-List: Fuel Selector Valve
>
>
>         Mark, do not use the original 1994 fuel selector valve, it has
>         killed people.
>
>         John Schussler
>
>         > On Aug 2, 2018, at 11:34 AM, Mark Fox
>         > wrote:
>         >
>         > All,
>         >
>         > I have the original fuel selector value from the aerodesign
>         kit in 1994. It
>         works but always seems to bind up some over time and I want to
>         upgrade/replace
>         it
>         >
>         > What has been the groups experience with that part? . Any
>         suggestions?
>         >
>         > Seems like Aircraft Spruce has them form $7 -
>         $1000.....Pretty wide range :)
>         >
>         > Thanks
>
>
>         ==========
>         ar-List" rel="noreferrer"
>         target="_blank">http://www.matronics.com/Navigator?Pulsar-List
>         
>         ==========
>         FORUMS -
>         eferrer" target="_blank">http://forums.matronics.com
>         
>         ==========
>         WIKI -
>         errer" target="_blank">http://wiki.matronics.com
>         
>         ==========
>         b Site -
>              -Matt Dralle, List Admin.
>         rel="noreferrer"
>         target="_blank">http://www.matronics.com/contribution
>         
>         ==========
>
>


 

-------------------------------------------------------------------------------------
                       Other Matronics Email List Services
-------------------------------------------------------------------------------------
Post A New Message               pulsar-list@matronics.com
UN/SUBSCRIBE                     http://www.matronics.com/subscription
List FAQ                         http://www.matronics.com/FAQ/Pulsar-List.htm
Web Forum Interface To Lists     http://forums.matronics.com
Matronics List Wiki              http://wiki.matronics.com
Full Archive Search Engine       http://www.matronics.com/search
7-Day List Browse                http://www.matronics.com/browse/pulsar-list
Browse Digests                   http://www.matronics.com/digest/pulsar-list
Browse Other Lists               http://www.matronics.com/browse
Live Online Chat!                http://www.matronics.com/chat
Archive Downloading              http://www.matronics.com/archives
Photo Share                      http://www.matronics.com/photoshare
Other Email Lists                http://www.matronics.com/emaillists
Contributions                    http://www.matronics.com/contribution
-------------------------------------------------------------------------------------

These Email List Services are sponsored solely by Matronics and through the 
generous Contributions of its members.