----------------------------------------------------------
                           Engines-List Digest Archive
                                      ---
                     Total Messages Posted Sun 08/03/03: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 04:19 PM - Re: Knock Sensor  (Richard Swiderski)
     2. 05:52 PM - Re: Knock Sensor  (Ed Anderson)
 
 
 
________________________________  Message 1  _____________________________________


Time: 04:19:12 PM PST US
From: "Richard Swiderski" <swiderski@rocketjet.net>
Subject: Re: Engines-List:  Knock Sensor

--> Engines-List message posted by: "Richard Swiderski" <swiderski@rocketjet.net>

Hello,

    I am building a turbo version of the 3 cyl, 1 liter Geo Metro engine.  It is
port injected & uses an afternmarket computer for ignition & fuel control. 
I will be mapping the ignition & fuel curves soon & I am looking for a panel mountable
knock sensor that visually shows the level of detonation with a series
of LED's. 
    Anyone know of a resource for one?  If not, how about a set of plans for one?
    If you're interested about the engine, you can check it out at http://www.geocities.com/ib2polish/
Go to "My Kolb" then "Engine"

Thanks,
Richard Swiderski






________________________________  Message 2  _____________________________________


Time: 05:52:47 PM PST US
From: "Ed Anderson" <eanderson@carolina.rr.com>
Subject: Re: Engines-List:  Knock Sensor

--> Engines-List message posted by: "Ed Anderson" <eanderson@carolina.rr.com>


----- Original Message -----
From: "Richard Swiderski" <swiderski@rocketjet.net>
Subject: Re: Engines-List: Knock Sensor


> --> Engines-List message posted by: "Richard Swiderski"
<swiderski@rocketjet.net>
>
> Hello,
>
>     I am building a turbo version of the 3 cyl, 1 liter Geo Metro engine.
It is port injected & uses an afternmarket computer for ignition & fuel
control.  I will be mapping the ignition & fuel curves soon & I am looking
for a panel mountable knock sensor that visually shows the level of
detonation with a series of LED's.
>     Anyone know of a resource for one?  If not, how about a set of plans
for one?
>     If you're interested about the engine, you can check it out at
http://www.geocities.com/ib2polish/
> Go to "My Kolb" then "Engine"
>
> Thanks,


Richard, I found this on the web, sounded like what you may be looking for,
don't know anything about it personally.

Ed Anderson
RV-6A N494BW 200+Rotary Hours
Matthews, NC

http://store.summitracing.com/productdetail.asp?p=1103&view=257#largerimage