Today's Message Index:
----------------------
1. 03:56 AM - Re: Help with Bendix/precision servo (cgalley)
2. 05:56 AM - Re: Help with Bendix/precision servo (Gary Casey)
3. 06:36 AM - Re: Re: Help with Bendix/precision servo (Trampas)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Help with Bendix/precision servo |
--> Engines-List message posted by: "cgalley" <cgalley@qcbc.org>
The Bonanza people are saying 29# is better for cool full throttle.
----- Original Message -----
From: "mbick" <mbick@carolina.rr.com>
Subject: Engines-List: Help with Bendix/precision servo
> --> Engines-List message posted by: "mbick" <mbick@carolina.rr.com>
>
> At idle engine runs fine but anything past that and at full rich if I
> advance the throttle the egt goes through the roof.
>
> And the engine runs very rough.
>
>
> Prior I noticed that EGT would go way up when I shut the throttle down in
a
> dive like base to final but nothing like it is now. I dare not take off.
>
>
> All that basics covered, no clogged lines to the servo, fuel filter clean
as
> can be, Fuel pressure @ 26 lbs.
>
>
> Any ideas?
>
>
> Also if anyone has any manuals or PDF docs online for the Bendix/Precision
> fuel server and flow divider I could sure use one.
>
>
> Thanks
>
> Mike
>
>
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Help with Bendix/precision servo |
--> Engines-List message posted by: "Gary Casey" <glcasey@adelphia.net>
<<And the engine runs very rough.
Prior I noticed that EGT would go way up when I shut the throttle down in a
dive like base to final but nothing like it is now. I dare not take off.>>
Sure the ignition timing isn't retarded? That would explain the high EGT's
better than a lean mixture. At idle is there an rpm rise when leaning,
indicating a correctly rich mixture. Does this go away just off idle?
Gary Casey
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Help with Bendix/precision servo |
--> Engines-List message posted by: "Trampas" <tstern@nc.rr.com>
Is your EGT meter reading correct?
Regards,
Trampas
www.sterntech.com
-----Original Message-----
From: owner-engines-list-server@matronics.com
[mailto:owner-engines-list-server@matronics.com] On Behalf Of Gary Casey
Subject: Engines-List: Re: Help with Bendix/precision servo
--> Engines-List message posted by: "Gary Casey" <glcasey@adelphia.net>
<<And the engine runs very rough.
Prior I noticed that EGT would go way up when I shut the throttle down in a
dive like base to final but nothing like it is now. I dare not take off.>>
Sure the ignition timing isn't retarded? That would explain the high EGT's
better than a lean mixture. At idle is there an rpm rise when leaning,
indicating a correctly rich mixture. Does this go away just off idle?
Gary Casey
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|