----------------------------------------------------------
                           Engines-List Digest Archive
                                      ---
                     Total Messages Posted Tue 01/18/05: 2
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 06:57 PM - Re: Parts manual for Lyc O-360-A1A  (Emrath)
     2. 09:34 PM - Re: Parts manual for Lyc O-360-A1A  (Gregory Young)
 
 
 
________________________________  Message 1  _____________________________________


Time: 06:57:34 PM PST US
From: "Emrath" <emrath@comcast.net>
Subject: Re: Engines-List: Parts manual for Lyc O-360-A1A

--> Engines-List message posted by: "Emrath" <emrath@comcast.net>

Where does one purchase these nuts and internal star washers?  I see ACS has
the washers but cannot find the nuts other than "exhaust nuts" are these the
same for use on Mags and other accessories? Are these the same as "grade 8"
nuts that are available at Lowe's and Home Depot?
Marty 

-----Original Message-----
      From: owner-engines-list-server@matronics.com
      [mailto:owner-engines-list-server@matronics.com]On Behalf Of Dave
      Durakovich
      Subject: Engines-List: Parts manual for Lyc O-360-A1A
      
      
      --> Engines-List message posted by: Dave Durakovich
<ddurakovich@yahoo.com>
      
      
      OK, I'm rebuilding O-360-A1D, standard flange, circa 1963 vintage for
use in
      a RV-4. All component parts have been overhauled or replaced with new
new
      ones, and it's time to slap it back together.
      
      Cleaning up the case/sump/acces. cover bolts leaves me with a
collection
      that probably doesn't have an AN bolt in the lot! All are standard nut
with
      star washers. I'm reasonably sure that some of these bolts came from
the
      Aviation department at Home Depot! Not being sure if this is OK (I'm
going
      to replace with new AN as soon as I can figure out what I really
need), I've
      decided to break down and get a parts manual.
      
      Yeah, I know it's experimental and I can do what I want, but what I
really
      want is to build it up the way a reputable overhaul shop would.
      
      I keep seeing a 1980 version parts manual, 1985 version, etc., etc.,
etc.,
      and just don't have any idea of which would apply, or what the
difference
      is.
      
      HELP! Is the earliest the right one, the latest, or ???
      
      HELP!
      
      Thanks,
      
      Dave
      






________________________________  Message 2  _____________________________________


Time: 09:34:03 PM PST US
From: "Gregory Young" <gyoung@cs-sol.com>
Subject: RE: Engines-List: Parts manual for Lyc O-360-A1A

--> Engines-List message posted by: "Gregory Young" <gyoung@cs-sol.com>

They are not the same. Try SACRAMENTO SKYRANCH (JOHN SCHWANER) 800-433-3564
916-421-7672 http://www.sacskyranch.com  
Their "Sky Ranch Engineering Manual" is a good reference book to have too.

Greg

> 
> --> Engines-List message posted by: "Emrath" <emrath@comcast.net>
> 
> Where does one purchase these nuts and internal star washers? 
>  I see ACS has the washers but cannot find the nuts other 
> than "exhaust nuts" are these the same for use on Mags and 
> other accessories? Are these the same as "grade 8"
> nuts that are available at Lowe's and Home Depot?
> Marty 
>