Today's Message Index:
----------------------
1. 12:02 AM - 1998 Geo 1.3L (Ron &Phyliss)
2. 08:44 AM - Fly-Ins (WRBYARS@aol.com)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> Engines-List message posted by: "Ron &Phyliss" <rgdplg@radiowire.net>
Ron Dallmeyer N701PR
rgdplg@radiowire.net
I am still having problems with the '98 Geo 1.3L engine. I may have isolated the
problem to a 12 volt source coming from my tach grd lead, which is now disconnected.
After blowing two PCMs, I am reluctant to try again without "airing"
my problem. My coils may have been damaged by this current, so I compared readings
between the 3 pin positions with some known good coils, using a diode
checker (Thanks Jeron and David). There are some different values.
The coils on the '98 are mounted in a different place compared to the later versions
and have a different part #. I used later model PCMs which have the same
circuit schematics, but may have some internal upgrades not compatible to the
'98 coils.
Before I waste some more time and money, I would like to know if there is anybody
else using the 1998 1.3L engine.
Please e-mail me at rgdpld@radiowire.net
Thanks,
Ron & Phyliss
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> Engines-List message posted by: WRBYARS@aol.com
ATTENTION:
Please help all of us that don't have the ability, or knowledge, to search
ALL the various lists announcing Fly-Ins, Get Together's, and Important
Events.
If you are aware of an event, please get someone to post it on flyins.com,
so we can have a common point of search, so we don't miss an important
happening.
Thank you
Bill
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|