---------------------------------------------------------- Engines-List Digest Archive --- Total Messages Posted Mon 12/19/05: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:58 AM - Re: Engines-List Digest: 0 Msgs - 12/18/05 (gary.stiffler@kroger.com 12/19/2005 09) 2. 09:57 AM - Re: Re: Engines-List Digest: 0 Msgs - 12/18/05 (steve korney) 3. 12:46 PM - Engine won't rotate by hand a full 360 degrees (Jim Stone) 4. 09:21 PM - Re: Re: Engines-List Digest: 0 Msgs - 12/18/05 (Ed Jeffko) ________________________________ Message 1 _____________________________________ Time: 06:58:32 AM PST US Subject: Engines-List: RE: Engines-List Digest: 0 Msgs - 12/18/05 From: "gary.stiffler@kroger.com 12/19/2005 09":54:41@roxy.matronics.com, Serialize complete at 12/19/2005 09:54:41@roxy.matronics.com --> Engines-List message posted by: gary.stiffler@kroger.com 12/19/2005 09:54:41, Serialize complete at 12/19/2005 09:54:41 I am making the hoses to route to my oil cooler which is mounted vertically. I have an O-320 Lycoming and am wondering if there is a preferred way to run the oil to the cooler. Do I need to feed the cooler from the bottom or the top or does it not make any difference? Thanks: Gary -----Original Message----- From: owner-engines-list-server@matronics.com [mailto:owner-engines-list-server@matronics.com] On Behalf Of engines-list-digest@matronics.com Subject: Engines-List Digest: 0 Msgs - 12/18/05 * ================================================== Online Versions of Today's List Digest Archive ================================================== Today's complete Engines-List Digest can also be found in either of the two Web Links listed below. The .html file includes the Digest formatted in HTML for viewing with a web browser and features Hyperlinked Indexes and Message Navigation. The .txt file includes the plain ASCII version of the Engines-List Digest and can be viewed with a generic text editor such as Notepad or with a web browser. HTML Version: http://www.matronics.com/digest/engines-list/Digest.Engines-List.2005-12-1 8.html Text Version: http://www.matronics.com/digest/engines-list/Digest.Engines-List.2005-12-1 8.txt ================================================ EMail Version of Today's List Digest Archive ================================================ Engines-List Digest Archive --- Total Messages Posted Sun 12/18/05: 0 Today's Message Index: ---------------------- ________________________________ Message 2 _____________________________________ Time: 09:57:32 AM PST US From: "steve korney" Subject: RE: Engines-List: RE: Engines-List Digest: 0 Msgs - 12/18/05 --> Engines-List message posted by: "steve korney" If you feed it from the top, you won't get any air bubbles or voids in the cooler... Best... Steve ----Original Message Follows---- From: "gary.stiffler@kroger.com 12/19/2005 09":54:41@roxy.matronics.com, Serialize complete at 12/19/2005 09:54:41@roxy.matronics.com Subject: Engines-List: RE: Engines-List Digest: 0 Msgs - 12/18/05 --> Engines-List message posted by: gary.stiffler@kroger.com 12/19/2005 09:54:41, Serialize complete at 12/19/2005 09:54:41 I am making the hoses to route to my oil cooler which is mounted vertically. I have an O-320 Lycoming and am wondering if there is a preferred way to run the oil to the cooler. Do I need to feed the cooler from the bottom or the top or does it not make any difference? Thanks: Gary -----Original Message----- From: owner-engines-list-server@matronics.com [mailto:owner-engines-list-server@matronics.com] On Behalf Of engines-list-digest@matronics.com Subject: Engines-List Digest: 0 Msgs - 12/18/05 * Online Versions of Today's List Digest Archive Today's complete Engines-List Digest can also be found in either of the two Web Links listed below. The .html file includes the Digest formatted in HTML for viewing with a web browser and features Hyperlinked Indexes and Message Navigation. The .txt file includes the plain ASCII version of the Engines-List Digest and can be viewed with a generic text editor such as Notepad or with a web browser. HTML Version: http://www.matronics.com/digest/engines-list/Digest.Engines-List.2005-12-1 8.html Text Version: http://www.matronics.com/digest/engines-list/Digest.Engines-List.2005-12-1 8.txt EMail Version of Today's List Digest Archive Engines-List Digest Archive --- Total Messages Posted Sun 12/18/05: 0 Today's Message Index: ---------------------- ________________________________ Message 3 _____________________________________ Time: 12:46:17 PM PST US From: "Jim Stone" Subject: Engines-List: Engine won't rotate by hand a full 360 degrees --> Engines-List message posted by: "Jim Stone" I have a 0 time overhauled Lyc 540 and while attempting to set the mag. I was rotating the engine with the starter ring or flywheel (prop not installed) and noticed the engine would stop at one point while rotating clockwise (60degrees btdc) and at a slightly different place when rotating counterclockwise(40 degrees btdc). At both hang points, no piston was approaching TDC (indicating no FOD in cylinder). I removed the mag but no improvement. Anyone have any ideas on what might cause this and what I need to do to correct it? Thanks, Jim ________________________________ Message 4 _____________________________________ Time: 09:21:23 PM PST US From: "Ed Jeffko" Subject: Re: Engines-List: RE: Engines-List Digest: 0 Msgs - 12/18/05 --> Engines-List message posted by: "Ed Jeffko" Feliz Navidad, Steve! ----- Original Message ----- From: "steve korney" Subject: RE: Engines-List: RE: Engines-List Digest: 0 Msgs - 12/18/05 > --> Engines-List message posted by: "steve korney" > > If you feed it from the top, you won't get any air bubbles or voids in the > cooler... > > Best... Steve > > > ----Original Message Follows---- > From: "gary.stiffler@kroger.com 12/19/2005 09":54:41@roxy.matronics.com, > Serialize complete at 12/19/2005 09:54:41@roxy.matronics.com > To: engines-list@matronics.com > Subject: Engines-List: RE: Engines-List Digest: 0 Msgs - 12/18/05 > Date: Mon, 19 Dec 2005 09:51:48 -0500 > > --> Engines-List message posted by: gary.stiffler@kroger.com 12/19/2005 > 09:54:41, Serialize complete at 12/19/2005 09:54:41 > > I am making the hoses to route to my oil cooler which is mounted > vertically. I have an O-320 Lycoming and am wondering if there is a > preferred way to run the oil to the cooler. Do I need to feed the cooler > from the bottom or the top or does it not make any difference? > > Thanks: > > Gary > > > -----Original Message----- > From: owner-engines-list-server@matronics.com > [mailto:owner-engines-list-server@matronics.com] On Behalf Of > engines-list-digest@matronics.com > To: engines-list-digest@matronics.com > Subject: Engines-List Digest: 0 Msgs - 12/18/05 > > * > > Online Versions of Today's List Digest Archive > > Today's complete Engines-List Digest can also be found in either of the > two Web Links listed below. The .html file includes the Digest formatted > in HTML for viewing with a web browser and features Hyperlinked Indexes > and Message Navigation. The .txt file includes the plain ASCII version > of the Engines-List Digest and can be viewed with a generic text editor > such as Notepad or with a web browser. > > HTML Version: > > > http://www.matronics.com/digest/engines-list/Digest.Engines-List.2005-12-1 > 8.html > > Text Version: > > > http://www.matronics.com/digest/engines-list/Digest.Engines-List.2005-12-1 > 8.txt > > > EMail Version of Today's List Digest Archive > > > Engines-List Digest Archive > --- > Total Messages Posted Sun 12/18/05: 0 > > > Today's Message Index: > ---------------------- > >